Energy balance model to predict the critical edge radius for adhesion formation with tool wear during micro-milling

[1]  P. Bandyopadhyay,et al.  Tool wear induced burr formation and concomitant reduction in MQL wetting capability in micro-milling , 2022, International Journal of Mechanical Sciences.

[2]  A. Çiçek,et al.  Performance evaluation of DLC and NCD coatings in micro-milling of Al7075-T6 alloy , 2022, Journal of Manufacturing Processes.

[3]  Zhenkun Zhang,et al.  Investigation on burr formation characteristics in micro milling of Ω-shaped reentrant microchannels , 2022, Journal of Manufacturing Processes.

[4]  M. Wan,et al.  On cutting process damping for small cutters by including the influences of the DMZ and elastic recovery , 2022, Journal of Materials Processing Technology.

[5]  P. Bandyopadhyay,et al.  Shadow zone in MQL application and its influence on lubricant deficiency and machinability during micro-milling , 2022, International Journal of Mechanical Sciences.

[6]  S. Liang,et al.  A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present , 2022, Journal of Manufacturing Science and Engineering.

[7]  K. Patra,et al.  Performance evaluation of tool coatings and nanofluid MQL on the micro-machinability of Ti-6Al-4V , 2022, Journal of Manufacturing Processes.

[8]  K. Aslantaş,et al.  An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718 , 2022, Tribology International.

[9]  P. Bandyopadhyay,et al.  Progressive wear based tool failure analysis during dry and MQL assisted sustainable micro-milling , 2021, International Journal of Mechanical Sciences.

[10]  P. Bandyopadhyay,et al.  Precise measurement of worn-out tool diameter using cutting edge features during progressive wear analysis in micro-milling , 2021, Wear.

[11]  Gan Feng,et al.  A strong basis for friction as the origin of size effect in cutting of metals , 2021 .

[12]  D. Xiang,et al.  Cutting force model of longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4V based on tool flank wear , 2021 .

[13]  Vinay Kulkarni,et al.  Tool Life Stage Prediction in Micro-Milling From Force Signal Analysis Using Machine Learning Methods , 2021 .

[14]  H. Ding,et al.  On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation , 2020, Journal of Manufacturing Science and Engineering.

[15]  P. Bandyopadhyay,et al.  An analytical approach to assess the variation of lubricant supply to the cutting tool during MQL assisted high speed micromilling , 2020 .

[16]  A. Khan,et al.  Tool wear, surface quality, and residual stresses analysis of micro-machined additive manufactured Ti–6Al–4V under dry and MQL conditions , 2020 .

[17]  Zhanqiang Liu,et al.  Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti–6Al–4V , 2020 .

[18]  Ji Zhao,et al.  Energy consumption considering tool wear and optimization of cutting parameters in micro milling process , 2020 .

[19]  S. Bruschi,et al.  On the correlation between surface quality and tool wear in micro–milling of pure copper , 2020 .

[20]  B. Powałka,et al.  Prediction of cutting forces during micro end milling considering chip thickness accumulation , 2019 .

[21]  Ying-Chao Ma,et al.  On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone , 2019, International Journal of Machine Tools and Manufacture.

[22]  M. Brown,et al.  Quantitative characterization of machining-induced white layers in Ti–6Al–4V , 2019, Materials Science and Engineering: A.

[23]  Maohua Du,et al.  Finite element modeling of friction at the tool-chip-workpiece interface in high speed machining of Ti6Al4V , 2019, International Journal of Mechanical Sciences.

[24]  K. V. Rao,et al.  A study on effect of dead metal zone on tool vibration, cutting and thrust forces in micro milling of Inconel 718 , 2019, Journal of Alloys and Compounds.

[25]  Bin Zou,et al.  Tool wear mechanisms and micro-channels quality in micro-machining of Ti-6Al-4V alloy using the Ti(C7N3)-based cermet micro-mills , 2019, Tribology International.

[26]  Aldo Attanasio,et al.  Tool wear analysis in micromilling of titanium alloy , 2019, Precision Engineering.

[27]  E. Kuram.  Overhang length effect during micro-milling of Inconel 718 superalloy , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[28]  Steven Y. Liang,et al.  Coupled thermal and mechanical analyses of micro-milling Inconel 718 , 2019 .

[29]  M. Marshall,et al.  Protocol for tool wear measurement in micro-milling , 2018, Wear.

[30]  Liang Li,et al.  Study on the tool wear and its effect of PCD tool in micro milling of tungsten carbide , 2018, International Journal of Refractory Metals and Hard Materials.

[31]  Aline Gonçalves dos Santos,et al.  Tungsten carbide micro-tool wear when micro milling UNS S32205 duplex stainless steel , 2018, Wear.

[32]  Erhan Budak,et al.  Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V , 2018 .

[33]  Lei Wan,et al.  Numerical analysis of the formation of the dead metal zone with different tools in orthogonal cutting , 2015, Simul. Model. Pract. Theory.

[34]  Tuğrul Özel,et al.  3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear , 2015 .

[35]  K. Aslantaş,et al.  An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy , 2013 .

[36]  S. Hosseini,et al.  Modeling the effect of tool edge radius on contact zone in nanomachining , 2012 .

[37]  Martin B.G. Jun,et al.  Modeling of minimum uncut chip thickness in micro machining of aluminum , 2012 .

[38]  Shreyes N. Melkote,et al.  Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process , 2007 .

[39]  Junghwan Ahn,et al.  Effects of the friction coefficient on the minimum cutting thickness in micro cutting , 2005 .

[40]  R.M.D. Mesquita,et al.  Experimental determination of the dynamic shear stress in metal cutting , 1992 .

[41]  R. F. Scrutton,et al.  Tool Edge Roundness and Stable Build-Up Formation in Finish Machining , 1974 .