Solder paste inspection by special led lighting for SMT manufacturing of printed circuit boards

Abstract Solder paste screen printing is the first and very critical stage of manufacturing in an SMT production line of printed circuit boards (PCBs). Many defects can be eliminated with proper paste inspection. Conventional inspection method would depend on an image acquired from a camera mounted from the top. This 2D inspection of solder paste based on images is fast but is limited to defect such as bridge or no solder. Defects related to the volume of the printed solder paste or unevenness of the paste cannot be treated from a top image. The proposed method of this paper would involve the use of special directional LED lighting from the side. A sequence of four images is acquired and image processing is carried out for the edge information of the printed solder paste. The proposed method can handle other types of defects that cannot be treated by conventional top lighting images.

[1]  Y. Y. Hung,et al.  Fast profilometer for the automatic measurement of 3-D object shapes. , 1990, Applied optics.

[2]  Ping-Sing Tsai,et al.  Shape from Shading: A Survey , 1999, IEEE Trans. Pattern Anal. Mach. Intell..

[3]  Gerd Hirzinger,et al.  Learning shape from shading by a multilayer network , 1996, IEEE Trans. Neural Networks.

[4]  Chung-Hsien Kuo,et al.  Reconstructing the 3D solder paste surface model using image processing and artificial neural network , 2004, 2004 IEEE International Conference on Systems, Man and Cybernetics (IEEE Cat. No.04CH37583).

[5]  Tommy W. S. Chow,et al.  Shape recovery from shading by a new neural-based reflectance model , 1999, IEEE Trans. Neural Networks.

[6]  M. Takeda,et al.  Fourier transform profilometry for the automatic measurement of 3-D object shapes. , 1983, Applied optics.

[7]  Tommy W. S. Chow,et al.  Neural computation approach for developing a 3D shape reconstruction model , 2001, IEEE Trans. Neural Networks.

[8]  Edmund Y. Lam,et al.  Three-dimensional reconstruction of wafer solder bumps using binary pattern projection , 2005, IS&T/SPIE Electronic Imaging.

[9]  Luigi di Stefano,et al.  A new phase extraction algorithm for phase profilometry , 1997, Machine Vision and Applications.