Performance analysis of an advanced ejector-expansion autocascade refrigeration cycle

Abstract In this paper, an advanced ejector-expansion autocascade refrigeration cycle (AEARC) using hydrocarbon mixture R290/R170 for applications in low-temperature freezers is proposed. In the AEARC, a two-phase flow driven ejector is introduced with new cycle configuration to reduce the thermodynamic loss in throttling process and lift the suction pressure of compressor significantly. The performances of the AEARC and traditional autocascade refrigeration cycle (ARC) are compared using energy and exergy analysis methods, and several important parameters for AEARC are also discussed in detail. The results indicate that AEARC is feasible and there are obvious performances improvements in the COP , volumetric refrigeration capacity and exergic efficiency. Especially, in AEARC, the COP and volumetric refrigeration capacity increase by 80.0% and 78.5% at most compared to that of ARC, respectively. In general, the AEARC can provide significant performance improvement and produce better actual operation benefit. The potential practical advantages may be worth further attention in future research.

[1]  Jianlin Yu,et al.  Application of an ejector in autocascade refrigeration cycle for the performance improvement , 2008 .

[2]  Jianlin Yu,et al.  Energy and exergy analysis of a new ejector enhanced auto-cascade refrigeration cycle , 2015 .

[3]  Neal Lawrence,et al.  Review of recent developments in advanced ejector technology , 2016 .

[4]  Jongho Jung,et al.  Effects of ejector geometries on performance of ejector-expansion R410A air conditioner considering cooling seasonal performance factor , 2017 .

[5]  J. U. Ahamed,et al.  A review on exergy analysis of vapor compression refrigeration system , 2011 .

[6]  Jianyong Chen,et al.  A review on versatile ejector applications in refrigeration systems , 2015 .

[7]  N. Tzabar,et al.  Binary mixed-refrigerants for steady cooling temperatures between 80 K and 150 K with Joule–Thomson cryocoolers , 2014 .

[8]  Xianbiao Bu,et al.  Performance characteristics of R1234yf ejector-expansion refrigeration cycle , 2014 .

[9]  Guangming Chen,et al.  Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor–liquid separators and environmentally benign binary refrigerants , 2013 .

[10]  Xiongwen Xu,et al.  Mixed refrigerant composition shift due to throttle valves opening in auto cascade refrigeration system , 2015 .

[11]  Jianyong Chen,et al.  Conventional and advanced exergy analysis of an ejector refrigeration system , 2015 .

[12]  P. Somasundaram,et al.  Exergy and energy analysis of three stage auto refrigerating cascade system using Zeotropic mixture for sustainable development , 2014 .

[13]  M. Atrey,et al.  Experimental investigation on mixed refrigerant Joule-Thomson cryocooler with flammable and non-flammable refrigerant mixtures , 2010 .

[14]  Farid Nasir Ani,et al.  A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle , 2012 .

[15]  Dale J. Missimer.  Refrigerant conversion of auto-refrigerating cascade (ARC) systems , 1997 .

[16]  Stefan Elbel,et al.  Historical and present developments of ejector refrigeration systems with emphasis on transcritical carbon dioxide air-conditioning applications , 2011 .

[17]  G. Venkatarathnam,et al.  Relationship between composition of mixture charged and that in circulation in an auto refrigerant cascade and a J-T refrigerator operating in liquid refrigerant supply mode , 2017 .

[18]  Yongseok Jeon,et al.  Performance characteristics of an R600a household refrigeration cycle with a modified two-phase ejector for various ejector geometries and operating conditions , 2017 .

[19]  Shiming Xu,et al.  Experimental and theoretical investigation on the performance of CO2/propane auto-cascade refrigerator with a fractionation heat exchanger , 2015 .

[20]  Maoqiong Gong,et al.  Development of a −186 °C cryogenic preservation chamber based on a dual mixed-gases Joule–Thomson refrigeration cycle , 2012 .

[21]  Mark O. McLinden,et al.  NIST Thermodynamic and Transport Properties of Refrigerants and Refrigerant Mixtures-REFPROP , 1998 .

[22]  Eckhard A. Groll,et al.  Study of ejector efficiencies in refrigeration cycles , 2013 .

[23]  Jianlin Yu,et al.  Advanced exergy analysis on a modified auto-cascade freezer cycle with an ejector , 2016 .

[24]  M. Q. Gong,et al.  Performances of the mixed-gases Joule–Thomson refrigeration cycles for cooling fixed-temperature heat loads , 2004 .

[25]  Jahar Sarkar,et al.  Geometric parameter optimization of ejector‐expansion refrigeration cycle with natural refrigerants , 2010 .

[26]  Ciro Aprea,et al.  Autocascade refrigeration system: Experimental results in achieving ultra low temperature , 2009 .

[27]  Jahar Sarkar,et al.  Ejector enhanced vapor compression refrigeration and heat pump systems—A review , 2012 .

[28]  Mo Se Kim,et al.  Experiment and simulation on the performance of an autocascade refrigeration system using carbon dioxide as a refrigerant , 2002 .

[29]  Dongsheng Wen,et al.  Experimental investigation of the performance of a single-stage auto-cascade refrigerator , 2016 .

[30]  Kai Du,et al.  A study on the cycle characteristics of an auto-cascade refrigeration system , 2009 .

[31]  Gadhiraju Venkatarathnam,et al.  Performance of an auto refrigerant cascade refrigerator operating in gas refrigerant supply (GRS) mode with nitrogen-hydrocarbon and argon-hydrocarbon refrigerants. , 2009 .

[32]  Ruzhu Wang,et al.  Progress of mathematical modeling on ejectors , 2009 .

[33]  Gadhiraju Venkatarathnam,et al.  A Review of Refrigeration Methods in the Temperature Range 4–300 K , 2011 .