Effect of LLDPE-g-MA on the rheological, thermal, mechanical properties and morphological characteristic of PA6/LLDPE blends
暂无分享,去创建一个
F. R. Passador | L. Montagna | L. Pessan | J. Marini | E. H. Backes | Erick Gabriel Ribeiro dos Anjos
[1] L. Pessan,et al. New insights on the compatibilization of PA6/ABS blends: A co-localized AFM-Raman study , 2018 .
[2] R. Adusumalli,et al. Effect of Compatibilizer on the Properties of Polyamide 6 Blend Based Carbon Fiber Reinforced Composites , 2018, Fibers and Polymers.
[3] M. Misra,et al. Novel compatibilized nylon-based ternary blends with polypropylene and poly(lactic acid): morphology evolution and rheological behaviour , 2018, RSC advances.
[4] O. Almeida,et al. Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization , 2017, Journal of Polymer Research.
[5] S. Ray,et al. Thermo-oxidative degradation study of melt-processed polyethylene and its blend with polyamide using time-resolved rheometry , 2017 .
[6] M. Vázquez-Lepe,et al. PREPARATION OF PA 6 / LLDPE BLENDS BY ROTATIONAL MOLDING , 2017 .
[7] A. Ruvolo-Filho,et al. Structural, thermal, and gas transport properties of HDPE/LLDPE blend‐based nanocomposites using a mixture of HDPE‐g‐MA and LLDPE‐g‐MA as compatibilizer , 2016 .
[8] A. D. Azzahari,et al. Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene , 2014, Journal of Polymer Research.
[9] B. Shin,et al. Morphological and mechanical properties of polyamide 6/linear low density polyethylene blend compatibilized by electron-beam initiated mediation process , 2014 .
[10] A. Singh,et al. Compatibilization Efficacy of LLDPE-g-MA on Mechanical, Thermal, Morphological and Water Absorption Properties of Nylon-6/LLDPE Blends , 2012 .
[11] E. Yıldırım,et al. A comparative study on the efficiencies of polyethylene compatibilizers by using theoretical methods , 2012, Journal of Polymer Research.
[12] Y. Mai,et al. A facile route for preparing stable co-continuous morphology of LLDPE/PA6 blends with low PA6 content , 2010 .
[13] Xinming Zhu,et al. Structure and Properties of PA66/Irradiated LLDPE Blends , 2010 .
[14] Shishan Wu,et al. Structure and Properties of PA66/Irradiated LLDPE Blends: , 2010 .
[15] J. Li,et al. The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon Fiber , 2010 .
[16] Xin Zhou,et al. Influence of maleic anhydride grafted polypropylene on the miscibility of polypropylene/polyamide-6 blends using ATR-FTIR mapping , 2009 .
[17] C. Albano,et al. Thermal Stability Evaluation of PA6/LLDPE/SEBS‐g‐DEM Blends , 2007 .
[18] Shishan Wu,et al. A study of LLDPE functionalized through ultraviolet irradiation and interfacial interaction of PA66/functionalized LLDPE blends , 2006 .
[19] Jijun Huang,et al. Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers , 2006 .
[20] Walter Richtering,et al. Understanding Rheology , 2002 .
[21] K. Kelar,et al. Influence of chemical and mechanical compatibilization on structure and properties of polyethylene/polyamide blends , 1998 .
[22] S. Sánchez-Valdes,et al. Fusion bonding of maleated polyethylene blends to polyamide 6 , 1998 .
[23] D. R. Paul,et al. Morphology of nylon 6/polypropylene blends compatibilized with maleated polypropylene , 1995 .