A pixel counting technique for sun patch assessment within building enclosures

Abstract Pixel counting (PxC) emerged as a powerful technique for external solar shading calculations of buildings, providing accurate results with great computational efficiency even for dense geometries. Motivated by this fact and because the technique can be also adapted to cope with interior surfaces without further ado, this paper aims at experimentally evaluating the PxC technique implemented in Domus software for calculating sun patch distribution within building enclosures. For the validation purpose, digital images were taken from the surfaces of an experimental house to compare with the simulation results obtained by using EnergyPlus and two PxC based tools: Domus and Shading II SketchUp plug-in. This first task has shown that the PxC presents results in good agreement with the experimental data, in terms of both location and area of the sun patch. Also, a second case study was constructed to evaluate the capability of PxC for simulating non-convex zones with perforated shading elements. The results, in general, have shown that the PxC can provide accurate results in situations where polygon clipping based algorithms cannot be applied.

[1]  D. C. Brown,et al.  Lens distortion for close-range photogrammetry , 1986 .

[2]  Donald P. Greenberg,et al.  Fast computer graphics techniques for calculating direct solar radiation on complex building surfaces , 2012 .

[3]  Ana Paula de Almeida Rocha,et al.  Experimental validation and comparison of direct solar shading calculations within building energy simulation tools: Polygon clipping and pixel counting techniques , 2017 .

[4]  Edna Shaviv,et al.  SHADING: A design tool for analyzing mutual shading between buildings , 1994 .

[5]  Nadia Ghrab-Morcos,et al.  Coupling the building simulation tool ZAER with a sunspot model. Case study in Tunis , 2014 .

[6]  Guillaume Polidori,et al.  Study of the effect of sun patch on the transient thermal behaviour of a heating floor in Algeria , 2016 .

[7]  Vítor Manuel Rodrigues da Cunha,et al.  REMOÇÃO HIERÁRQUICA DE GEOMETRIA POR OCLUSÃO EM SIMULAÇÕES EM TEMPO REAL , 2009 .

[8]  Auline Rodler,et al.  Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation , 2014 .

[9]  Jan Hensen,et al.  Building Performance Simulation for Design and Operation , 2019 .

[10]  Karolos-Nikolaos Kontoleon,et al.  Glazing solar heat gain analysis and optimization at varying orientations and placements in aspect of distributed radiation at the interior surfaces , 2015 .

[11]  Jean-Jacques Roux,et al.  Development and validation of a three dimensional thermal transient numerical model with sun patch: Application to a low energy cell , 2015 .

[12]  Maria Wall.  Distribution of solar radiation in glazed spaces and adjacent buildings. A comparison of simulation programs , 1997 .

[13]  Ricardo C. L. F. Oliveira,et al.  A simulation environment for performance analysis of HVAC systems , 2008 .

[14]  Joseph Virgone,et al.  Impact of sun patch and three-dimensional heat transfer descriptions on the accuracy of a building’s thermal behavior prediction , 2016 .