Numerical investigations of the elastic and plastic behaviour of an open-cell aluminium foam

The elastic and plastic behaviour of an open-cell aluminium foam is investigated numerically. Finite element discretisations are used that have been derived from real foam specimens by computer tomography data. By different combinations of boundary velocities in the three directions in space, various multiaxial stress states are realised in the foam. This is done for nine foam discretisations with varying relative density. Thus, the elastic constants, the yield surface and the plastic potential of the foam are determined depending on the relative density. The results of the numerical simulations are: (1) the variation of the Young's modulus in terms of the relative density can be described by a power law relationship. (2) The elastic Poisson's ratio does not depend on the relative density. (3) The yield surface is not rotationally symmetric with regard to the hydrostatic axis. (4) The dimensions of the yield surface vary with a power law relationship in terms of the relative density. (5) The plastic potential is approximately associated to the yield surface for all stress states.

[1]  Wai-Fah Chen,et al.  Plasticity for Structural Engineers , 1988 .

[2]  Michael F. Ashby,et al.  Cellular metals and metal foaming technology , 2001 .

[3]  Lorna J. Gibson,et al.  Compressive and tensile behaviour of aluminum foams , 1999 .

[4]  Elias Siores,et al.  Compressive behaviour of aluminium foams at low and medium strain rates , 2002 .

[5]  N. Fleck,et al.  Isotropic constitutive models for metallic foams , 2000 .

[6]  Edward J. Garboczi,et al.  Elastic properties of model random three-dimensional open-cell solids , 2002 .

[7]  Robert F. Singer,et al.  The investigation of morphometric parameters of aluminium foams using micro-computed tomography , 2002 .

[8]  Norman A. Fleck,et al.  Effect of imperfections on the yielding of two-dimensional foams , 1999 .

[9]  S. Nemat-Nasser,et al.  Micromechanics: Overall Properties of Heterogeneous Materials , 1993 .

[10]  Tinggang Zhang,et al.  A plasticity model for cellular materials with open-celled structure , 2003 .

[11]  Lorna J. Gibson,et al.  Failure of aluminum foams under multiaxial loads , 2000 .

[12]  Michael F. Ashby,et al.  Failure surfaces for cellular materials under multiaxial loads—I.Modelling , 1989 .

[13]  R. J. Green,et al.  A plasticity theory for porous solids , 1972 .

[14]  Y. W. Kwon,et al.  Representative unit-cell models for open-cell metal foams with or without elastic filler , 2003 .

[15]  Martin Sauer.  Adaptive Kopplung des Netzfreien SPH-Verfahrens mit Finiten Elementen zur Berechnung von Impaktvorgaengen(Adaptive Coupling of the Mesh-Free SPH-Method with Finite Elements for the Calculation of Impact Events) , 2000 .

[16]  T. Lu,et al.  A phenomenological framework of constitutive modelling for incompressible and compressible elasto-plastic solids , 2000 .

[17]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[18]  Ronald E. Miller.  A continuum plasticity model for the constitutive and indentation behaviour of foamed metals , 2000 .

[19]  G. Weng,et al.  Plastic potential and yield function of porous materials with aligned and randomly oriented spheroidal voids , 1993 .

[20]  T. Wierzbicki,et al.  Experimental studies on the yield behavior of ductile and brittle aluminum foams , 2003 .

[21]  Reinhard Pippan,et al.  DEFORMATION BEHAVIOUR OF CLOSED-CELL ALUMINIUM FOAMS IN TENSION , 2001 .