Comparison of Al2O3 nano-overlays deposited with magnetron sputtering and atomic layer deposition on optical fibers for sensing purposes

In this work we compare effects of thin (<300 nm) aluminum oxide (Al2O3) deposition using advanced physical (Magnetron Sputtering - MS) and chemical (Atomic Layer Deposition – ALD) vapor deposition methods on optical fibers. We investigate an influence of the process parameters on optical properties of the nano-films deposited with MS. In order to investigate the properties of the films directly on the fibers, we induced long-period fiber grating (LPG) in the fiber prior the deposition. Thanks to LPG sensitivity to thickness and optical properties of the overlays deposited on the fiber, we are able to monitor Al2O3 nano-overlay properties. Moreover, we investigate an influence of the overlays deposited with both the methods on LPG-based refractive index (RI) sensing. We show and discuss tuning of the RI sensitivity by proper selection of both thickness and optical properties of the Al2O3 nano-overlays.

[1]  Richard O. Claus,et al.  Ammonia optical fiber sensor based on self-assembled zirconia thin films , 2005 .

[2]  Han-Bo-Ram Lee,et al.  Applications of atomic layer deposition to nanofabrication and emerging nanodevices , 2009 .

[3]  P. Juliet,et al.  Properties of aluminium oxide thin films deposited by reactive magnetron sputtering , 1999 .

[4]  Siddharth Ramachandran,et al.  Analysis of optical response of long period fiber gratings to nm-thick thin-film coating. , 2005, Optics express.

[5]  Daniel Poitras,et al.  Plasma deposition of optical films and coatings: A review , 2000 .

[6]  Zhengtian Gu,et al.  Design optimization of a long-period fiber grating with sol-gel coating for a gas sensor , 2007 .

[7]  Lutz Kirste,et al.  Mechanical and electrical properties of plasma and thermal atomic layer deposited Al2O3 films on GaAs and Si , 2013 .

[8]  Ping Miao,et al.  Sensitivity characteristics of long-period fiber gratings , 2005, SPIE/OSA/IEEE Asia Communications and Photonics.

[9]  Wojtek J. Bock,et al.  Application of diamond-like carbon films in optical fibre sensors based on long-period gratings , 2007 .

[10]  Philippe Lalanne,et al.  Optimization of sensitivity in Long Period Fiber Gratings with overlay deposition. , 2005, Optics Express.

[11]  S. James,et al.  Modification of the refractive index response of long period gratings using thin film overlays , 2005 .

[12]  P. Kelly,et al.  Magnetron sputtering: a review of recent developments and applications , 2000 .

[13]  Predrag Mikulic,et al.  Pressure Sensing in High-Refractive-Index Liquids Using Long-Period Gratings Nanocoated with Silicon Nitride , 2010, Sensors.

[14]  D. Stamatis,et al.  Orthogonal Arrays and Linear Graphs , 2002 .

[15]  Bloomer,et al.  Optical dispersion relations for amorphous semiconductors and amorphous dielectrics. , 1986, Physical review. B, Condensed matter.

[16]  Robert C. Wolpert,et al.  A Review of the , 1985 .

[17]  E. M. Alkoy,et al.  The structure and properties of copper oxide and copper aluminium oxide coatings prepared by pulsed magnetron sputtering of powder targets , 2005 .

[18]  John E. Sipe,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[19]  Predrag Mikulic,et al.  A Novel Fiber-Optic Tapered Long-Period Grating Sensor for Pressure Monitoring , 2007, IEEE Transactions on Instrumentation and Measurement.

[20]  M. Amberg,et al.  PZT thin film deposition on Si wafers and optical fibers prepared by reactive DC pulsed magnetron sputtering from a single metallic target , 2005 .

[21]  Tadahiro Ohmi,et al.  Total Room Temperature Wet Cleaning for Si Substrate Surface , 1996 .

[22]  B. Szyszka,et al.  Magnetron Sputtering ‐ Milestones of 30 Years , 2011 .