VSA-HD: From the enumeration analysis to the prototypical implementation

This paper presents design, implementation and performance of a new Variable Stiffness Actuator (VSA) based on Harmonic Drives (VSA-HD), which is an improvement over past work reported in [1], [2]. While previous prototypes have been developed to demonstrate the effectiveness of the variable stiffness actuation principle and the possibility to develop a compact and reliable actuator, the VSA-HD has been obtained by exploring the performance of the enumeration of all VSA made out a basic components set (i.e. two prime movers, two harmonic-drive gears, and the output shaft) and all the feasible interconnections between them as presented in [3]. Along this enumeration the VSA-HD conceptual layout has been selected as being good trade-off between mechanical complexity and overall performance. This paper discusses in depth the actuator mechanical layout, highlighting the main characteristics of the new design. A model for the actuator is introduced and validated by experimental results.

[1]  Alessandro De Luca,et al.  Nonlinear decoupled motion-stiffness control and collision detection/reaction for the VSA-II variable stiffness device , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Alessandro De Luca,et al.  On the feedback linearization of robots with variable joint stiffness , 2008, 2008 IEEE International Conference on Robotics and Automation.

[3]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[4]  Sadao Kawamura,et al.  An energy saving control method of robot motions based on adaptive stiffness optimization - cases of multi-frequency components - , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Gianluca Palli,et al.  Robust control of robots with variable joint stiffness , 2009, 2009 International Conference on Advanced Robotics.

[6]  Joel E. Chestnutt,et al.  An actuator with physically variable stiffness for highly dynamic legged locomotion , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[7]  Atsuo Takanishi,et al.  Realization of dynamic biped walking varying joint stiffness using antagonistic driven joints , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[8]  Timothy D. Tuttle,et al.  Understanding and Modeling the Behavior of a Harmonic Drive Gear Transmission , 1992 .

[9]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[10]  Antonio Bicchi,et al.  Design and Control of a Variable Stiffness Actuator for Safe and Fast Physical Human/Robot Interaction , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[11]  Alin Albu-Schäffer,et al.  Injury evaluation of human-robot impacts , 2008, 2008 IEEE International Conference on Robotics and Automation.

[12]  Manuel G. Catalano,et al.  Mechanism design for Variable Stiffness Actuation based on enumeration and analysis of performance , 2010, 2010 IEEE International Conference on Robotics and Automation.

[13]  Sadao Kawamura,et al.  Resonance-based motion control method for multi-joint robot through combining stiffness adaptation and iterative learning control , 2009, 2009 IEEE International Conference on Robotics and Automation.

[14]  Sungchul Kang,et al.  Design of a robot joint with variable stiffness , 2008, 2008 IEEE International Conference on Robotics and Automation.