Refractive Index Sensing With Mach–Zehnder Interferometer Based on Concatenating Two Single-Mode Fiber Tapers

A novel refractive index (RI) sensor based on a fiber Mach-Zehnder interferometer was realized by concatenating two single-mode fiber tapers separated by a middle section. The proposed device had a minimum insertion loss of 3 dB and maximum interferometric extinction ratio over 20 dB. The resolution (0.171 nm) of the two-taper sensor to its surrounding RI change (0.01) was found to be comparable to that (0.252 nm) of similar structures made from an identical long-period gratings pair, and its ease of fabrication makes it a low-cost alternative to existing sensing applications.

[1]  I. Bennion,et al.  Sampled fiber Bragg grating for simultaneous refractive-index and temperature measurement. , 2001, Optics letters.

[2]  Richard J. Black,et al.  Tapered single-mode fibres and devices. I. Adiabaticity criteria , 1991 .

[3]  Kin Seng Chiang,et al.  Analysis of etched long-period fibre grating and its response to external refractive index , 2000 .

[4]  Marc Douay,et al.  Study of in fiber Mach–Zehnder interferometer based on two spaced 3-dB long period gratings surrounded by a refractive index higher than that of silica , 2000 .

[5]  Sailing He,et al.  Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed With a Multimode-Fiber Taper , 2007, IEEE Photonics Technology Letters.

[6]  Joel Villatoro,et al.  High resolution refractive index sensing with cladded multimode tapered optical fibre , 2004 .

[7]  A. Zhang,et al.  Fiber-taper seeded long-period grating pair as a highly sensitive refractive-index sensor , 2005, IEEE Photonics Technology Letters.

[8]  Brent E. Little,et al.  Analytic theory of coupling from tapered fibers and half-blocks into microsphere resonators , 1999 .

[9]  G. Laffont,et al.  Tilted short-period fibre-Bragg-grating-induced coupling to cladding modes for accurate refractometry , 2001 .

[10]  Frank G. Shi,et al.  A graded-index fiber taper design for laser diode to single-mode fiber coupling , 2006 .

[11]  David J. Webb,et al.  A high sensitivity refractometer based upon a long period grating Mach–Zehnder interferometer , 2002 .

[12]  D. Monzon-Hernandez,et al.  Low-cost optical fiber refractive-index sensor based on core diameter mismatch , 2006, Journal of Lightwave Technology.

[13]  M. Mansuripur,et al.  Biconical Fiber Taper Sensors , 2006, IEEE Photonics Technology Letters.

[14]  Alan D. Kersey,et al.  Analysis of the response of long period fiber gratings to external index of refraction , 1998 .