论文信息 - The Spallation Neutron Source accelerator system design

The Spallation Neutron Source accelerator system design

The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ~100 high-power RF power systems, a 2 K cryogenic plant, ~400 DC and pulsed power supply systems, ~400 beam diagnostic devices and a distributed control system handling ~100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.

[1] A. Webster,et al. Laser wire beam profile monitor in the spallation neutron source (SNS) superconducting linac , 2010 .

[2] P. Cameron,et al. SNS accelerator diagnostics: progress and challenges , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[3] P. Pierini,et al. Superconducting Linac for the SNS , 2000 .

[4] Daniel Rees,et al. Spallation Neutron Source high-power RF transmitter design for high availability, ease of installation and cost containment , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[5] M. Champion,et al. The Spallation neutron source accelerator low level RF control system , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[6] W. Buxton,et al. PERFORMANCE RESULTS FOR THE BNL PSI DESIGNED FOR THE SNS AND ITS APPLICATION TO OTHER ACCELERATORS. , 2002 .

[7] G. Mahler,et al. Design and manufacturing of the SNS accumulator ring and transport system dc magnets , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[8] S. Tepikian,et al. Final test results for the SNS ring dipoles , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[9] G. Mahler,et al. Stripped electron collection at the Spallation Neutron Source , 2005 .

[10] M. Champion,et al. Adaptive Feed Forward Beam-Loading Compensation Experience at the Spallation Neutron Source Linac , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[11] Karl L. Brown,et al. Third-order TRANSPORT: A computer program for designing charged particle beam transport systems , 1995 .

[12] T. Hardek,et al. Observations of a fast transverse instability in the PSR , 1992 .

[13] J. Bradley,et al. The SNS linac high power RF system design, status, and results , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[14] J. Wei,et al. Mechanism of electron cloud clearing in the accumulator ring of the Spallation Neutron Source , 2004 .

[15] M. Stirbet,et al. The fundamental power coupler prototype for the Spallation Neutron Source (SNS) superconducting cavities , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[16] J. Qiang,et al. Collective resonance model of energy exchange in 3D nonequipartitioned beams. , 2001, Physical review letters.

[17] R. Rosenberg,et al. Electron proton two-stream instability at the PSR , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[18] A. Fedotov,et al. Resonant beam behavior studies in the Proton Storage Ring , 2003 .

[19] P. He. Secondary Electron Emission Measurements for Tin coating on the Stainless Steel of SNS Accumulator Ring Vacuum Chamber , 2004 .

[20] S. Virostek,et al. A thermal analysis model for high power density beam stops , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[21] Wu Zhang,et al. SNS EXTRACTION FAST KICKER PULSED POWER SYSTEM , 2004 .

[22] N. Simos,et al. Optimization of the collimation system for the Spallation Neutron Source accumulator ring , 2001 .

[23] D. Raparia,et al. Exploration of beam fault scenarios for the Spallation Neutron Source target , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[24] P. He,et al. Development of titanium nitride coating for SNS ring vacuum chambers , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[25] Sang-Ho Kim,et al. SNS HOM damping requirements via bunch tracking , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[26] M. Stirbet,et al. Results of the Cryogenic Testing of the SNS Prototype Cryomodule , 2002 .

[27] P. Kneisel,et al. Design of the SNS cryomodule , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[28] V. Danilov,et al. Longitudinal impedance simulations in ORBIT: benchmarking and application to the SNS extraction kicker , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[29] V. Danilov,et al. Space charge induced resonance excitation in high intensity rings , 2003 .

[30] N. Simos,et al. Double-wall collimator design of the SNS project , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[31] J. Galambos,et al. Longitudinal beam parameters study in the SNS LINAC , 2007, 2007 IEEE Particle Accelerator Conference (PAC).

[32] D.E. Anderson,et al. Redesign of the SNS modulator H-bridge for utilization of press-pack IGBTs , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[33] H. Hahn,et al. Coupling impedance measurements of the SNS RF cavity and extraction kicker magnet , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[34] C. Kubota,et al. Beam test of the pre-injector and the 3-MeV $H^{-}$ RFQ with a new field stabilizer PISL , 1996 .

[35] N. Tsoupas,et al. SNS HEBT momentum scraper, H/sup +/ ray trace simulation and vacuum chamber design , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[36] H. C. Hseuh,et al. SNS Ring and transport system magnet acceptance and installation preparation , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[37] T. Hardek,et al. Upgrade of Input Power Coupling System for the SNS RFQ , 2008 .

[38] D. Raparia,et al. Beam dump window design for the Spallation Neutron Source , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[39] K. Kasemir,et al. The Design and Performance of the Spallation Neutron Source Low-Level RF Control System , 2004 .

[40] Furman,et al. Electron cloud development in the Proton Storage Ring and in theSpallation Neutron Source , 2002 .

[41] Daniele Davino,et al. Improved analytical model of the transverse coupling impedance of ferrite kicker magnets , 2003 .

[42] U. Balachandran. Advances in cryogenic engineering : transactions of the international cryogenic materials conference - ICMC, Keystone, Colorado 29 August-2 September 2005 , 2006 .

[43] M. Holding,et al. Beam Parameter Measurement and Control at the SNS Target , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[44] J. Staples,et al. SNS LINAC HALO MITIGATION , 2002 .

[45] Jie Wei,et al. Synchrotrons and accumulators for high-intensity proton beams , 2003 .

[47] M. Collier,et al. Fabrication and tuning of the SNS CCL hot model , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[48] A. V. Feschenko,et al. Methods and instrumentation for bunch shape measurements , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[49] D.E. Anderson,et al. Design, status, and first operations of the Spallation Neutron Source polyphase resonant converter modulator system , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[50] M. Champion,et al. Operational Experience with the Spallation Neutron Source High Power Protection Module , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[51] Daniele Davino,et al. MEASUREMENTS OF THE COUPLING IMPEDANCE OF THE SNS EXTRACTION KICKERS. , 2002 .

[52] J.G. Wang. SNS ring extraction septum magnet and its interference with adjacent quadrupole , 2007, 2007 IEEE Particle Accelerator Conference (PAC).

[53] P. He,et al. Summary on Titanium Nitride Coating of SNS Ring Vacuum Chambers , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[54] D. P. Gurd,et al. FIRST EXPERIENCE WITH HANDOVER AND COMMISSIONING OF THE SNS CONTROL SYSTEM , 2003 .

[55] B. Oerter,et al. Power supply control and monitoring for the SNS ring and transport system , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[56] D. Raparia,et al. Integration of the beam scraper and primary collimator in the SNS ring , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[57] K. Smith,et al. Control of heavily-beam-loaded sns-ring cavities , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[58] K. Crandall,et al. Expected beam performance of the SNS linac , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[59] P. Pierini,et al. Superconducting prototype cavities for the Spallation Neutron Source (SNS) project , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[60] Thomas Wangler,et al. Principles of RF linear accelerators , 1998 .

[61] K. Crandall,et al. Impact of cavity RF field phase and amplitude control uncertainties on the SNS linac , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[62] D. Rees,et al. The RF system design for the Spallation Neutron Source , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[63] S. Kurennoy,et al. Meander-line current structure for SNS fast beam chopper , 1999, Proceedings of the 1999 Particle Accelerator Conference (Cat. No.99CH36366).

[64] Furman,et al. Electron cloud instabilities in the Proton Storage Ring and Spallation Neutron Source , 2002 .

[65] M. Hoff,et al. THE DESIGN OF A HIGH CURRENT, HIGH DUTY FACTOR RFQ FOR THE SNS ❊ , 2000 .

[66] Leo Dalesio,et al. EPICS: RECENT DEVELOPMENTS AND FUTURE PERSPECTIVES* , 2003 .

[67] B. S. Bevins,et al. The SNS Cryogenic Control System: Experiences in Collaboration , 2001 .

[68] P. Ladd,et al. The Design and Performance of the Integrated Spallation Neutron Source Vacuum Control System , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[69] Jian-Guang Wang. Particle optics of quadrupole doublet magnets in Spallation Neutron Source accumulator ring , 2006 .

[70] Romuald Duperrier,et al. TOUTATIS : A radio frequency quadrupole code , 2000 .

[71] Jean Delayen,et al. Piezoelectric tuner compensation of Lorentz detuning in superconducting cavities , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[72] M. Furman,et al. Probabilistic Model for the Simulation of Secondary Electron Emission , 2002 .

[73] M. Blaskiewicz,et al. Progress on the SNS ring LLRF control system , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[74] A. Soukas,et al. TRACKING TESTS FOR THE SNS FAST INJECTION BUMP POWER SUPPLY , 2004 .

[75] Sang-Ho Kim,et al. Simulation of quench dynamics in SRF cavities under pulsed operation , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[76] V. Danilov,et al. ELECTRON CLOUD SELF-CONSISTENT SIMULATIONS FOR THE SNS RING , 2006 .

[77] M. Doleans,et al. Electromagnetic simulations and properties of the fundamental power couplers for the SNS superconducting cavities , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[78] Venkatarao Ganni,et al. The Development of Automatic Sequences for the RF and Cryogenic Systems at the Spallation Neutron Source , 2005 .

[79] T. Shea,et al. SNS TARGET BEAM PROFILE VIEWSCREEN DESIGN AND OPERATION , 2007 .

[80] K. Crandall,et al. Room-temperature linac structures for the Spallation Neutron Source , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[82] R. Holmes,et al. Installation and Testing of SNS Magnet Power Supplies , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[83] H. Hahn. Impedance measurements of the Spallation Neutron Source extraction kicker system , 2004 .

[84] M. Plum,et al. The SNS linac wire scanner system , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[86] K. Crandall,et al. Particle-beam behavior in the SNS linac with simulated and reconstructed beams , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[87] Sang-Ho Kim,et al. Higher-order-mode (HOM) power in elliptical superconducting cavities for intense pulsed proton accelerators , 2002 .

[88] D. Davino,et al. SNS Beam‐in‐Gap Cleaning and Collimation , 2002 .

[89] W. Weng,et al. Dependence of the SNS transfer lines and accumulator ring on linac energy , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[90] S. Kurokawa,et al. Numerical study of the photoelectron cloud in KEKB Low Energy Ring with a three-dimensional particle in cell method , 2002 .

[91] P.W. Wheeler,et al. High-frequency multimegawatt polyphase resonant power conditioning , 2005, IEEE Transactions on Plasma Science.

[92] A. Ratti,et al. Overview of the Spallation Neutron Source Linac Low-Level RF Control System , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[93] N. Catalan-Lasheras,et al. The collimation system of the SNS transfer lines , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[94] J. Tang. SNS VACUUM CONTROL SYSTEM: SOFTWARE DESIGN STRATEGY AND COMMISSIONING EXPERIENCE* , 2003 .

[95] J. Qiang,et al. Emittance coupling in high intensity beams applied to the SNS linac , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[96] N. Malitsky,et al. Unified accelerator libraries , 1997 .

[97] K. R. Crandall,et al. PARMTEQ-A beam dynamics code for the RFQ linear accelerator , 1988 .

[98] A. Fedotov. Resonances and beam loss in high intensity rings , 2003, Proceedings of the 2003 Particle Accelerator Conference.

[99] P. He. METALLIZATION OF SNS RING INJECTION KICKER CERAMIC CHAMBERS. , 2002 .

[100] D. Raparia,et al. The SNS Ring to Target Beam Transport line , 1999, Proceedings of the 1999 Particle Accelerator Conference (Cat. No.99CH36366).

[101] Y. Y. Lee,et al. Low-loss design for the high-intensity accumulator ring of the Spallation Neutron Source , 2000 .

[102] J.D. Smith,et al. Plans for a collaboratively developed distributed control system for the Spallation Neutron Source , 1999, Proceedings of the 1999 Particle Accelerator Conference (Cat. No.99CH36366).

[103] P. R. Cameron,et al. Spallation Neutron Source beam loss monitor system , 2001, Proceedings of the 2003 Particle Accelerator Conference.

[104] D. Raparia,et al. Physical and Electromagnetic Properties of Customized Coatings for SNS Injection Ceramic Chambers and Extraction Ferrite Kickers , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[105] J. Galambos,et al. Parameter and cost model for spallation neutron source studies , 1997, Proceedings of the 1997 Particle Accelerator Conference (Cat. No.97CH36167).