Effect of cutting fluids on surface residual stress in machining of waspaloy

[1]  E. Budak,et al.  Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties , 2023, Journal of Materials Processing Technology.

[2]  Wei Zhou,et al.  Temperature measurement performance of thin-film thermocouple cutting tool in turning titanium alloy , 2022, Ceramics International.

[3]  Xiaoliang Jin,et al.  Coupled Eulerian-Lagrangian model for residual stress prediction in orthogonal cutting of Waspaloy , 2022, Manufacturing Letters.

[4]  S. Liang,et al.  A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present , 2022, Journal of Manufacturing Science and Engineering.

[5]  T. Bergs,et al.  Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation , 2021, The International Journal of Advanced Manufacturing Technology.

[6]  T. Bergs,et al.  MODELING THE COOLING EFFECT OF THE CUTTING FLUID IN MACHINING USING A COUPLED FE-CFD SIMULATION , 2021, MM Science Journal.

[7]  Kuo Liu,et al.  Numerical prediction of machining-induced surface residual stress for TC4 cryogenic turning , 2021, The International Journal of Advanced Manufacturing Technology.

[8]  A. Clare,et al.  Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms , 2021, International Journal of Machine Tools and Manufacture.

[9]  Doriana M. D’Addona,et al.  Tool wear estimation in turning of Inconel 718 based on wavelet sensor signal analysis and machine learning paradigms , 2020, Production Engineering.

[10]  Dongdong Xu,et al.  Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718 , 2020, The International Journal of Advanced Manufacturing Technology.

[11]  T. Beno,et al.  Effects of high-pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718 , 2019, Wear.

[12]  Dong Liu,et al.  Investigation on the Thermal Deformation Behavior of the Nickel-Based Superalloy Strengthened by γ′ Phase , 2019, Crystals.

[13]  J. Ståhl,et al.  The mystery of missing feed force — The effect of friction models, flank wear and ploughing on feed force in metal cutting simulations , 2018, Journal of Manufacturing Processes.

[14]  Jinming Zhou,et al.  Modeling subsurface deformation induced by machining of Inconel 718 , 2017 .

[15]  D. Umbrello,et al.  Finite element modeling of microstructural changes in Waspaloy dry machining , 2016, The International Journal of Advanced Manufacturing Technology.

[16]  Habib Sidhom,et al.  Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel , 2012 .

[17]  Vimal Dhokia,et al.  Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids , 2012 .

[18]  Janez Kopac,et al.  Investigation of machining performance in high pressure jet assisted turning of Inconel 718: A numerical model , 2011 .

[19]  S. Dominiak,et al.  Dry machining of Inconel 718, workpiece surface integrity , 2011 .

[20]  Yusuf Altintas,et al.  Slip-line field model of micro-cutting process with round tool edge effect , 2011 .

[21]  D. Ulutan,et al.  Machining induced surface integrity in titanium and nickel alloys: A review , 2011 .

[22]  Keith Ridgway,et al.  Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems , 2008 .

[23]  B. E. Alaca,et al.  Analytical modelling of residual stresses in machining , 2007 .

[24]  Ernani Sartori,et al.  Convection coefficient equations for forced air flow over flat surfaces , 2006 .

[25]  H. Bhadeshia,et al.  Residual stress. Part 2 – Nature and origins , 2001 .

[26]  Mathias Agmell,et al.  Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718 , 2021, Simul. Model. Pract. Theory.

[27]  T. Bergs,et al.  Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process , 2021, Procedia CIRP.

[28]  M. Nouari,et al.  Prediction of the Cutting Forces and Chip Morphology When Machining the Ti6Al4V Alloy Using a Microstructural Coupled Model , 2017 .

[29]  Fritz Klocke,et al.  FE-simulation of the Cutting Process under Consideration of Cutting Fluid ☆ , 2017 .

[30]  Amine Ammar,et al.  Development of a numerical model for the understanding of the chip formation in high-pressure water-jet assisted machining , 2016 .

[31]  W. Konig,et al.  Machining hard materials with geometrically defined cutting edges , 1990 .

[32]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .