Resonator with magnetically adjustable natural frequency for vibration energy harvesting

The recent years have witnessed a wealth of research on energy harvesting technologies. To maximize the output power, vibration-based energy harvesters are normally designed to exhibit natural frequencies that match those of the excitation. This has spurred interest into the design of devices that possess tunable natural frequencies to cope with sources which exhibit varying frequencies. In this work, an energy harvester is proposed in the form of a base excited cantilever treated with a piezoelectric layer. The cantilever carries a tip mass in the form of a magnet which is placed in close proximity to a stationary magnet with opposite polarity. Different values of axial tensions, and hence different natural frequencies, are obtained by adjusting the gap between the magnets. A dynamic model to predict the system performance is presented and verified experimentally. Based on the findings of this paper, natural frequencies ranging from 3.19 to 12 Hz were achieved.

[1]  Daniel J. Inman,et al.  Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs , 2009 .

[2]  Michael J. Anderson,et al.  A model for an extensional mode resonator used as a frequency-adjustable vibration energy harvester , 2010 .

[3]  Daniel J. Inman,et al.  Effects of System Parameters and Damping on an Optimal Vibration-Based Energy Harvester , 2007 .

[4]  M. G. Prasad,et al.  A vibration energy harvesting device with bidirectional resonance frequency tunability , 2008 .

[5]  Neil D. Sims,et al.  Energy harvesting from the nonlinear oscillations of magnetic levitation , 2009 .

[6]  Daniel J. Inman,et al.  Energy Harvesting Technologies , 2008 .

[7]  Huan Xue,et al.  Broadband piezoelectric energy harvesting devices using multiple bimorphs with different operating frequencies , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  N. G. Stephen,et al.  On energy harvesting from ambient vibration , 2006 .

[9]  Michael Curt Elwenspoek,et al.  Fabrication and interfacing of nanochannel devices for single-molecule studies , 2009 .

[10]  Du Toit,et al.  Modeling and design of a MEMS piezoelectric vibration energy harvester , 2005 .

[11]  A. Lopes Ribeiro.  Axial and transverse forces in an axisymmetric suspension using permanent magnets , 2006 .

[12]  Jong-Kyu Park,et al.  Constitutive relations for piezoelectric benders under various boundary conditions , 2004 .

[13]  P. Wright,et al.  Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload , 2006 .

[14]  Dibin Zhu,et al.  Design and experimental characterization of a tunable vibration-based electromagnetic micro-generator , 2010 .

[15]  F. J. Shaker,et al.  Effect of axial load on mode shapes and frequencies of beams , 1975 .

[16]  P. Woias,et al.  Bidirectional frequency tuning of a piezoelectric energy converter based on a cantilever beam , 2009 .

[17]  B. Mann,et al.  Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator , 2010 .

[18]  Dibin Zhu,et al.  CLOSED LOOP FREQUENCY TUNING OF A VIBRATION-BASED MICRO- GENERATOR , 2008 .