Development of three-dimensional power Doppler ultrasound imaging of fetoplacental vasculature.

To develop an off-line system for three-dimensional (3-D) ultrasound (US) reconstruction of fetoplacental vasculature using colour segmentation and reconstruction software and to determine sources of error in fully freehand ultrasound image acquisition. US images were acquired freehand with the Acuson Sequoia (5C 2-MHz transducer) using power Doppler. After digital transfer to a personal computer, CQ Analysis software (Kinetic Imaging Ltd, Liverpool, UK) was used to segment the colour information from these images, and the resulting 8-bit grey-scale images were used for 3-D rendering using commercial software (VoxBlast, Vaytek Inc., Fairfield, IA, USA). 2-D scanning, software and freehand acquisition accuracy were assessed using a linear test rig and distance and volume phantoms (Dansk Phantom Service Ltd); 2-D scanning accuracy was within 1.3%, and software reconstruction accuracy within 1% for x and y planes and up to 3% for the z plane. Fully freehand acquisition was associated with a 12% to 18% mean percentage error in distance measurement in the plane of acquisition. Volumetric reconstruction inaccuracy was between 1.5% and 19.7% for precisely separated images and between 16.2% and 39.2% for fully freehand image acquisition. Rendered 3-D US vascular images clearly delineated vascular anatomy within the placenta and cord. Fully freehand 3-D US does have a role in off-line reconstruction of vascular anatomy, although variability in the z plane precludes its use for volumetric measurement. (E-mail: a.welsh@ic.ac.uk)