Coseismic Slip Vectors of 24 August and 30 October 2016 Earthquakes in Central Italy: Oblique Slip and Regional Kinematic Implications

After 24 August and 30 October 2016 central Italy earthquakes (Mw 6.0 and 6.5, respectively), photogrammetry and geodetic survey were performed at various sites along a 6‐km‐long portion of the rupturing Monte Vettore fault system, providing very high‐resolution georeferenced 3‐D point clouds and imagery of the 24 August rupture and a data set of bedrock fault scarp before/after the 30 October earthquake. The maximum coseismic displacement for both events occurs near Scoglio dell' Aquila with an average normal dip slip of 22 ± 4 and 184 ± 6 cm, respectively. Coseismic slip vectors and meter‐scale corrugation axis are oriented N280 ± 10° on the ~N140° striking main Vettore fault involving oblique normal slip with a right‐lateral component and N205 ± 10° on ~N170° fault strands implying oblique normal slip with a left‐lateral component. We quantify the near‐field coseismic displacements of the Monte Vettore fault for the 30 October event: the footwall has been translated horizontally by 42 ± 2 cm toward the ENE and uplifted by 11 ± 2 cm. The hangingwall has moved horizontally by 26 ± 2 cm, toward the NW, in a direction parallel to the fault plane and subsided by 116 ± 2 cm. The fault geometry and our determined surface coseismic slip vectors are mechanically compatible with a σ3 = N65 ± 15°. This stress regime is consistent with the 30 October 2016 focal mechanism and the relative motion between the Adriatic microplate and the Tyrrhenian coastal region. The 30 October surface rupture results from seismic slip at depth and thus has a tectonic origin.

[1]  R. Binet,et al.  Measurement of ground displacement from optical satellite image correlation using the free open-source software MicMac , 2015 .

[2]  O. Kreylos,et al.  Coseismic slip variation assessed from terrestrial lidar scans of the El Mayor–Cucapah surface rupture , 2013 .

[3]  T. Maruyama,et al.  The M7 2016 Kumamoto, Japan, Earthquake: 3‐D Deformation Along the Fault and Within the Damage Zone Constrained From Differential Lidar Topography , 2018, Journal of Geophysical Research: Solid Earth.

[4]  T. Parsons,et al.  Vertical deformation associated with normal fault systems evolved over coseismic, postseismic, and multiseismic periods , 2016 .

[5]  Mario Locati,et al.  CPTI15, the 2015 version of the Parametric Catalogue of Italian Earthquakes , 2016 .

[6]  Y. Klinger.  continental strike-slip earthquake segmentation and thickness of the crust , 2010 .

[7]  Göran Ekström,et al.  The global CMT project 2004–2010: Centroid-moment tensors for 13,017 earthquakes , 2012 .

[8]  S. Robson,et al.  Straightforward reconstruction of 3D surfaces and topography with a camera: Accuracy and geoscience application , 2012 .

[9]  A. Valentini,et al.  Integrating faults and past earthquakes into a probabilistic seismic hazard model for peninsular Italy , 2017 .

[10]  V. Kouskouna,et al.  The 1986 Kalamata (South Peloponnesus) Earthquake: Detailed study of a normal fault, evidences for east-west extension in the Hellenic Arc , 1988 .

[11]  Samuel T. Thiele,et al.  Ground-based and UAV-Based photogrammetry: A multi-scale, high-resolution mapping tool for structural geology and paleoseismology , 2014 .

[12]  Clément Perrin,et al.  Off-fault tip splay networks: a genetic and generic property of faults indicative of their long-term propagation, and a major component of off-fault damage , 2015 .

[13]  E. Tondi,et al.  Active tectonics in the central Apennines and possible implications for seismic hazard analysis in peninsular Italy , 1997 .

[14]  Rafael Garcia,et al.  First direct observation of coseismic slip and seafloor rupture along a submarine normal fault and implications for fault slip history , 2016 .

[15]  Carlo Alberto Brunori,et al.  A database of the coseismic effects following the 30 October 2016 Norcia earthquake in Central Italy , 2018, Scientific Data.

[16]  P. Galli,et al.  Zoning Surface Rupture Hazard along Normal Faults: Insight from the 2009 Mw 6.3 L’Aquila, Central Italy, Earthquake and Other Global Earthquakes , 2012 .

[17]  J. Kirkpatrick,et al.  Smoothing and re-roughening processes: The geometric evolution of a single fault zone , 2016 .

[18]  Srikanth Saripalli,et al.  Rapid mapping of ultrafine fault zone topography with structure from motion , 2014 .

[19]  Timothy Masterlark,et al.  Resolving Source Geometry of the 24 August 2016 Amatrice, Central Italy, Earthquake from InSAR Data and 3D Finite‐Element Modeling , 2018 .

[20]  S. M. Jong,et al.  Mapping landslide displacements using Structure from Motion (SfM) and image correlation of multi-temporal UAV photography , 2014 .

[21]  Katsuichiro Goda,et al.  New Empirical Earthquake Source-Scaling Laws , 2017 .

[22]  O. Bellier,et al.  Constraining recent fault offsets with statistical and geometrical methods: Example from the Jasneuf Fault (Western Alps, France) , 2016 .

[23]  M. Westoby,et al.  ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications , 2012 .

[24]  Srikanth Saripalli,et al.  Coseismic fault zone deformation revealed with differential lidar: Examples from Japanese Mw ∼7 intraplate earthquakes , 2014 .

[25]  Grazia Pietrantonio,et al.  A Combined Velocity Field of the Mediterranean Region , 2017 .

[26]  N. D’Agostino,et al.  Evidence for localized active extension in the central Apennines (Italy) from global positioning system observations , 2011 .

[27]  John H. Woodhouse,et al.  Determination of earthquake source parameters from waveform data for studies of global and regional seismicity , 1981 .

[28]  Paul J. Besl,et al.  Method for registration of 3-D shapes , 1992, Other Conferences.

[29]  Giusy Lavecchia,et al.  Architecture and seismotectonics of a regional low‐angle normal fault zone in central Italy , 2000 .

[30]  Emanuele Casarotti,et al.  Complex Fault Geometry and Rupture Dynamics of the MW 6.5, 30 October 2016, Central Italy Earthquake , 2018 .

[31]  Stephen B. DeLong,et al.  Rates and patterns of surface deformation from laser scanning following the South Napa earthquake, California , 2015 .

[32]  Mark D. Semon,et al.  POSTUSE REVIEW: An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements , 1982 .

[33]  Aldo Zollo,et al.  The Irpinia (Italy) 1980 earthquake: Detailed analysis of a complex normal faulting , 1989 .

[34]  Srikanth Saripalli,et al.  Three‐dimensional surface displacements and rotations from differencing pre‐ and post‐earthquake LiDAR point clouds , 2012 .

[35]  G. Lavecchia,et al.  Fault Geometry and Active Stress from Earthquakes and Field Geology Data Analysis: The Colfiorito 1997 and L’Aquila 2009 Cases (Central Italy) , 2015, Pure and Applied Geophysics.

[36]  M. Cattaneo,et al.  The 2016 central Italy seismic sequence: a first look at the mainshocks, aftershocks, and source models , 2017 .

[37]  Gianluca Valensise,et al.  Paleoseismology along the 1980 surface rupture of the Irpinia Fault: Implications for earthquake recurrence in the southern Apennines, Italy , 1993 .

[38]  A. Pizzi,et al.  Fault Segmentation as Constraint to the Occurrence of the Main Shocks of the 2016 Central Italy Seismic Sequence , 2017 .

[39]  Brief communication: Co-seismic displacement on 26 and 30 October 2016 ( M w = 5.9 and 6.5) – earthquakes in central Italy from the analysis of a local GNSS network , 2017 .

[40]  Timothy E. Dawson,et al.  Long‐Term Time‐Dependent Probabilities for the Third Uniform California Earthquake Rupture Forecast (UCERF3) , 2015 .

[41]  Laura Scognamiglio,et al.  Slip heterogeneity and directivity of the ML 6.0, 2016, Amatrice earthquake estimated with rapid finite‐fault inversion , 2016 .

[42]  Francesca Romana Cinti,et al.  Coseismic ruptures of the 24 August 2016, Mw 6.0 Amatrice earthquake (central Italy) , 2017 .

[43]  Alejandro Hinojosa-Corona,et al.  Optimization of legacy lidar data sets for measuring near‐field earthquake displacements , 2014 .

[44]  Peizhen Zhang,et al.  Surface faulting of the 1954 Fairview Peak (MS 7.2) and Dixie Valley (MS 6.8) earthquakes, central Nevada , 1996, Bulletin of the Seismological Society of America.

[45]  N. D’Agostino.  Complete seismic release of tectonic strain and earthquake recurrence in the Apennines (Italy) , 2014 .

[46]  Antonio Pepe,et al.  Geodetic model of the 2016 Central Italy earthquake sequence inferred from InSAR and GPS data , 2017 .

[47]  G. Roberts,et al.  Near-field fault slip of the 2016 Vettore Mw 6.6 earthquake (Central Italy) measured using low-cost GNSS , 2017, Scientific Reports.

[48]  R. Civico,et al.  Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy , 2018 .

[49]  J. J. Walsh,et al.  Interactions and growth of faults in an outcrop-scale system , 2016, Special Publications.

[50]  F. Visini,et al.  Seismic slip history of the Pizzalto fault (central Apennines, Italy) using in situ‐produced 36Cl cosmic ray exposure dating and rare earth element concentrations , 2016 .

[51]  R. E. Wallace.  Grouping and migration of surface faulting and variations in slip rates on faults in the Great Basin province , 1987 .

[52]  F. Visini,et al.  Fault-Based Earthquake Rupture Forecast in Central Italy: Remarks after the L'Aquila Mw 6.3 Event , 2011 .

[53]  Paul J. Besl,et al.  A Method for Registration of 3-D Shapes , 1992, IEEE Trans. Pattern Anal. Mach. Intell..

[54]  Jean Virieux,et al.  Seismicity, normal faulting, and the geomorphological development of the Gulf of Corinth (Greece): the Corinth earthquakes of February and March 1981 , 1982 .