PCM thermal storage system for ‘free’ heating and cooling of buildings

Abstract In order to reduce energy consumption in buildings, a solution using phase change materials (PCMs) as thermal energy storage (TES) is presented. During summer nights, cold is stored and delivered during the day to reduce cooling load, whereas in winter, heat from solar air collector is stored for heating during morning and evening hours. Proposed is a stand-alone unit suitable for offices, which consists of plates filled with paraffin RT22HC. The objective of the paper is to examine the functioning of the suggested TES system on an annual basis and to explore the feasibility of using it for both, cooling and heating. First numerical model is set up, which assumes 2D geometry and evaluates thermal response, calculations are carried out in Fluent. Then validation of simulations with experimental results is established. Finally the feasibility of storage unit on an annual basis is demonstrated.

[1]  Victor M. Ferreira,et al.  Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .

[2]  S. Kalaiselvam,et al.  Energy conservative air conditioning system using silver nano-based PCM thermal storage for modern buildings , 2014 .

[3]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[4]  P. Charvát,et al.  Numerical and experimental investigation of a PCM-based thermal storage unit for solar air systems , 2014 .

[5]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[6]  Göran Hed,et al.  Mathematical modelling of PCM air heat exchanger , 2006 .

[7]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[8]  Maciej Jaworski,et al.  Thermal performance of building element containing phase change material (PCM) integrated with ventilation system – An experimental study , 2014 .

[9]  Shazim Ali Memon,et al.  Phase change materials integrated in building walls: A state of the art review , 2014 .

[10]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[11]  Luisa F. Cabeza,et al.  Measurement of enthalpy curves of phase change materials via DSC and T-History: When are both methods needed to estimate the behaviour of the bulk material in applications? , 2014 .

[12]  Stéphane Citherlet,et al.  Numerical model and experimental validation of heat storage with phase change materials , 2007 .

[13]  Savvas A. Tassou,et al.  Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system , 2013 .

[14]  Denis Bruneau,et al.  Experimental investigation and modelling of a low temperature PCM thermal energy exchange and storage system , 2014 .

[15]  Martin Belusko,et al.  Designing a PCM storage system using the effectiveness-number of transfer units method in low energy cooling of buildings , 2012 .

[16]  Jose M. Marin,et al.  Characterization of melting and solidification in a real-scale PCM–air heat exchanger: Experimental results and empirical model , 2011 .

[17]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[18]  Muhammad M. Rahman,et al.  Comparison between the single-PCM and multi-PCM thermal energy storage design , 2014 .

[19]  Anica Trp,et al.  An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit , 2005 .

[20]  Wasim Saman,et al.  Thermal Performance Of A Pcm Thermal Storage Unit , 2008 .

[21]  Gennady Ziskind,et al.  Analytical model of a PCM-air heat exchanger , 2011 .