Fabrication of plastic microchips by hot embossing.

Plastic microchips with microchannels (100 microm wide, 40 microm deep) of varying designs have been fabricated in polymethylmethacrylate by a hot embossing process using an electroform tool produced starting with silicon chip masters. Hot-embossed chips were capped with a polymethylmethacrylate top using a proprietary solvent bonding process. Holes were drilled through the top of the chip to allow access to the channels. The chips were tested with fluid and shown to fill easily. The seal between the top of the chip and the hot embossed base was effective, and there was no leakage from the channels when fluid was pumped through the microchannels. The chips were also tested with a semen sample and the plastic chip performed identically to the previous silicon-glass and glass versions of the chip. This microfabrication technique offers a viable and potentially high-volume low cost production method for fabricating transparent microchips for analytical applications.

[1]  Larry J. Kricka,et al.  Sperm Testing with Microfabricated Glass-Capped Silicon Microchannels , 1994 .

[2]  C. Henry,et al.  Dual-electrode electrochemical detection for poly(dimethylsiloxane)-fabricated capillary electrophoresis microchips. , 2000, Analytical chemistry.

[3]  J P Landers,et al.  Single-strand conformation polymorphism analysis by capillary and microchip electrophoresis: a fast, simple method for detection of common mutations in BRCA1 and BRCA2. , 2000, Genomics.

[4]  Eric S. Nordman,et al.  DNA sequencing in a monolithic microchannel device , 2000, Electrophoresis.

[5]  S. Soper,et al.  Nanoliter-scale sample preparation methods directly coupled to polymethylmethacrylate-based microchips and gel-filled capillaries for the analysis of oligonucleotides. , 1999, Journal of chromatography. A.

[6]  F. Švec,et al.  Towards stationary phases for chromatography on a microchip: Molded porous polymer monoliths prepared in capillaries by photoinitiated in situ polymerization as separation media for electrochromatography , 2000, Electrophoresis.

[7]  K. Young,et al.  Plastic microchip electrophoresis for analysis of PCR products of hepatitis C virus. , 1999, Clinical chemistry.

[8]  L J Kricka,et al.  Micromachined analytical devices: microchips for semen testing. , 1997, Journal of pharmaceutical and biomedical analysis.

[9]  L J Kricka,et al.  Miniaturization of analytical systems. , 1998, Clinical chemistry.

[10]  S. Soper,et al.  Micromachining in plastics using X-ray lithography for the fabrication of microelectrophoresis devices. , 1999, Journal of biomechanical engineering.

[11]  T Kitamori,et al.  Integration of an immunosorbent assay system: analysis of secretory human immunoglobulin A on polystyrene beads in a microchip. , 2000, Analytical chemistry.

[12]  Shu-Hui Chen,et al.  Analysis of DNA fragments by microchip electrophoresis fabricated on poly(methyl methacrylate) substrates using a wire‐imprinting method , 2000, Electrophoresis.

[13]  M. Morris,et al.  Plastic microchip electrophoresis with analyte velocity modulation. Application to fluorescence background rejection. , 2000, Analytical chemistry.

[14]  J. Rossier,et al.  Microchannel networks for electrophoretic separations , 1999, Electrophoresis.

[15]  T Fujii,et al.  Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane‐glass hybrid microchip , 2001, Electrophoresis.