Applying PTP-to-SNTP time-gateway to IEC61850 systems

The paper describes the application of an improved Time Gateway for simplifying the integration of old IEC 61850 devices in new IEC 61850 Substation Automation System with IEEE 1588 PTP. Old devices typically retrieve time information with the well-known SNTP protocol which uses very different time representations and synchronization strategies with respect to PTP. Hence, the paper uses a transparent, full-software, Time Gateway for interfacing SNTP devices with a PTP synchronization domain, demonstrating its applicability by means of a prototype based on an FPGA. Experimental results show the Time Gateway improves the overall performance with respect to an SNTP-only system. Moreover, the experiments demonstrate that the synchronization accuracy is limited by the SNTP.

[1]  Daniele Marioli,et al.  A Distributed Instrument for Performance Analysis of Real-Time Ethernet Networks , 2008, IEEE Transactions on Industrial Informatics.

[2]  A. Flammini,et al.  IEEE 1588-based Synchronization System for a Displacement Sensor Network , 2006, 2006 IEEE Instrumentation and Measurement Technology Conference Proceedings.

[3]  Pedro Moreira,et al.  White rabbit: Sub-nanosecond timing distribution over ethernet , 2009, 2009 International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[4]  Alessandra Flammini,et al.  Architecture of an embedded time gateway between PTP and SNTP , 2011, 2011 6th IEEE International Symposium on Industrial and Embedded Systems.

[5]  Gunnar Prytz,et al.  QoS in switched Industrial Ethernet , 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

[6]  M. Branicky,et al.  Design Considerations for Software Only Implementations of the IEEE 1588 Precision Time Protocol , 2005 .

[7]  Emiliano Sisinni,et al.  On the Seamless Interconnection of IEEE1588-Based Devices Using a PROFINET IO Infrastructure , 2010, IEEE Transactions on Industrial Informatics.