Acoustical Excitation for Damping Estimation in Rotating Machinery

In experimental modal analysis a structure is excited with a force in order to estimate the frequency response function. Typically, this force is generated by a shaker or a hammer impact. Both methods have proven their usefulness, but have some well-known disadvantages. A main disadvantage of the shaker is that it has to be fixed to the structure whereas with a hammer it is not possible to excite a specific frequency. To overcome these disadvantages, alternative non-contact methods can be used. There are several non-contact techniques, i.e. pressurized air, laser, acoustics, etc. By using acoustics as an excitation technique it is easy to select an excitation signal going from random noise to a simple sine. Also the equipment to produce the acoustic excitation is rather cheap. However, the state of the art does not offer a straightforward technique to estimate the excitation force, making it difficult for applications such as experimental modal analysis. In this research, acoustic excitation is compared with hammer excitation to estimate the frequency response function of two shafts. Especially a method to validate the force induced by the acoustics is derived. The final purpose of this research is to estimate the damping properties of rotating machinery.

[1]  Gian Marco Revel,et al.  Measurement of vibrational modal parameters using laser pulse excitation techniques , 2004 .

[2]  D. J. Ewins,et al.  Modal analysis and testing of rotating structures , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[3]  S. Vanlanduit,et al.  Experimental modal testing using pressurized air excitation , 2007 .

[4]  Theodor Freiheit,et al.  Non-contact experimental modal analysis using air excitation and a microphone array , 2010 .

[5]  L. Forrai,et al.  Stability Analysis of Symmetrical Rotor-Bearing Systems With Internal Damping Using Finite Element Method , 1996 .

[6]  H. Künkel.  Frequency analysis. , 1978, Electroencephalography and clinical neurophysiology. Supplement.

[7]  Bram Vervisch,et al.  Sensititity of the stability threshold in linearized rotordynamics , 2012 .

[8]  F. Fahy,et al.  Sound and Structural Vibration: Radiation, Transmission and Response , 1987 .

[9]  H Konstantin-Hansen,et al.  Operational Modal Analysis of a Wind Turbine Wing Using Acoustical Excitation , 2002 .

[10]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[11]  Tom Proulx.  Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5 , 2011 .

[12]  Nicola Amati,et al.  Hysteretic Damping in Rotordynamics: An Equivalent Formulation , 2010 .

[13]  Y. F. Xu,et al.  Operational Modal Analysis of a Rectangular Plate Using Noncontact Acoustic Excitation , 2011 .