Experiment and simulation of metal flow in multi-stage forming process of railway wheel

To investigate the metal flow during the railway wheel forming process, experiments and finite element method (FEM) simulation were carried out. An axisymmetric modeling for the wheel rolling process was proposed to predict the metal flow in radial direction, by which the whole multi-stage forming process could be simulated in axisymmetric and integral way. The result shows that the axisymmetric simulation method was an effective method to explore the metal flow in radial direction and to analyze the relationships of tools motion during the wheel rolling. The detail information about metal flow in railway wheel forming process was obtained. The metal in the wheel web was from the area near the half radius of the original billet; the chill zone of the billet became an envelope of the rim and part of the web with a maximum thickness of about 6 mm below the tread. At the wheel rolling stage, the metal in the rim flowed towards the web; the metal near the surfaces of the conjunction region between the web and rim suffered severe shear deformation.

[1]  Keith Davey,et al.  Efficient Strategies for the Simulation of Railway Wheel Forming , 2001 .

[2]  Lin Gao,et al.  Austenite Grain Size Evolution in Railway Wheel During Multi-Stage Forging Processes , 2013 .

[3]  K. Davey,et al.  A practical method for finite element ring rolling simulation using the ALE flow formulation , 2002 .

[4]  Vassili Toropov,et al.  A new algorithm for reduction of number of press-forming stages in forging processes using numerical optimization and FE simulation , 2008 .

[5]  Moo Young Huh,et al.  Development of the profile ring rolling process for large slewing rings of alloy steels , 2007 .

[6]  Cheng Lv,et al.  3D FEM simulation of the multi-stage forging process of a gas turbine compressor blade , 2008 .

[7]  Naksoo Kim,et al.  Ring rolling process simulation by the three dimensional finite element method , 1990 .

[8]  Mohammad Reza Forouzan,et al.  Guide roll simulation in FE analysis of ring rolling , 2003 .

[9]  Indrajit Basak,et al.  Three-dimensional finite element analysis of multi-stage hot forming of railway wheels , 2011 .

[10]  M. Wang,et al.  Analysis of coupled mechanical and thermal behaviors in hot rolling of large rings of titanium alloy using 3D dynamic explicit FEM , 2009 .

[11]  K. Davey,et al.  The practicalities of ring rolling simulation for profiled rings , 2002 .

[12]  Zhichao Sun,et al.  Dynamic explicit FE modeling of hot ring rolling process , 2006 .

[13]  Keith Davey,et al.  Simulation of a multi-stage railway wheel and tyre forming process , 1998 .

[14]  Christian Brecher,et al.  Optimization of multi-stage closed-die forging processes by coupled simulation of the machine and the forging processes , 2010, Prod. Eng..

[15]  Q. Yong,et al.  New Type Austenite Dynamic Recrystallization of Microalloyed Forging Steels 38MnVS During Forging Process , 2013 .