Two-dimensional small signal analysis of backward-wave oscillation in a helix traveling-wave tube under Brillouin-flow, periodic permanent magnetic focusing

The phenomenon of electron beam rotation in the axial magnetic field of a magnetically focused helix TWT results in more complicated parasitic backward-wave oscillation conditions compared to the case when the beam rotation is not considered. Accounting for this phenomenon allows for further improvement of TWT stability to the parasitic backward-wave oscillation. In this paper, we examine the typical super-broad bandwidth TWT that has an anisotropically-loaded circuit-e.g., a helical structure supported by dielectric rods in a metal shell provided with metal longitudinal vanes projecting radial inward. The 2D small-signal model is developed that takes into account the effects of the beam's rotation and focusing magnetic field parameters under Brillouin flow on backward-wave oscillation conditions in TWT. The theory permits an investigation of the effects of amplitude and axial periodicity of permanent periodic magnetic (PPM) focusing magnetic flux density and of Pierce's relative electron velocity parameter on the start oscillation length. Physical and numerical analyses are presented for a TWT's stability to backward-wave oscillation under permanent magnetic focusing, which is longitudinally periodic and homogeneous across the beam, for the case when the backward-wave consists of two nonazimuthally symmetric harmonics. A particular numerical example reveals the dependence of start oscillation length of a TWT on the PPM focusing parameters as well, as Pierce's relative electron velocity parameter. The theory predicts that by tailoring of the magnetic field period it is possible to increase the start-oscillation length by a factor of 1.25 and the power output by the factor 2.6 compared to the case when the beam rotation is not taken into account. The 2D model developed in this paper provides sufficient data for more correct and precise choice between signal amplification and backward-wave oscillation suppression in the anisotropically-loaded helix TWT than the existing 1D theories.

[1]  Lalit Kumar,et al.  Modeling of a vane-loaded helical slow-wave structure for broad-band traveling-wave tubes , 1989 .

[3]  A. Scott,et al.  What's new in helix TWT's , 1978, 1978 International Electron Devices Meeting.

[4]  B. B. Pal,et al.  Optimum design of a potentially dispersion-free helical slow-wave circuit of a broad-band TWT , 1984 .

[5]  S. F. Paik,et al.  Design formulas for helix dispersion shaping , 1969 .

[6]  N. P. Kravchenko,et al.  Computation of dispersion characteristics of a spiral placed in a screen with longitudinal ribs , 1976 .

[7]  G.M. Branch,et al.  Plasma frequency reduction factors in electron beams , 1955, IRE Transactions on Electron Devices.

[8]  M. Cascone,et al.  Effective use of dispersion shaping in broadband helix TWT circuits , 1979, 1979 International Electron Devices Meeting.

[9]  John R. Pierce,et al.  Traveling-Wave Tubes , 1947, Proceedings of the IRE.

[10]  H. P. Freund,et al.  Design of traveling wave tubes based on field theory , 1994 .

[11]  B. N. Basu,et al.  Analysis of an inhomogeneously loaded helical slow-wave structure for broad-band TWTs , 1989 .

[12]  A.R. Jung 10 KW and up from a helix TWT? , 1978, 1978 International Electron Devices Meeting.

[13]  H. Freund,et al.  Field theory of a traveling wave tube amplifier with a tape helix , 1993 .

[14]  J.P. Rymer,et al.  Three octaves with one TWT , 1982, 1982 International Electron Devices Meeting.

[15]  B. Basu,et al.  Electromagnetic theory and applications in beam-wave electronics , 1996 .