Prediction of microstructure in laser powder bed fusion process

Abstract Additive manufacturing (AM) processes are receiving widespread attention due to the ability to create or repair precision engineering components without use of any die or mold. Currently, the approach to obtain a specific user defined/as-desired or conformal/epitaxial microstructure is a challenging and expensive iterative process. Modeling and validation of solidification microstructure can be leveraged to reduce iteration cost in obtaining a desired microstructure. Numerical Volume-of-fluid based method incorporating Marangoni convection can accurately predict the resultant melt pool geometry and temperature distribution which can serve as an input in prediction of microstructure evolution in solidifying mushy region. Hence, in the present study, computational fluid dynamics (CFD) analysis is used to predict melt pool characteristics and phase field modeling is employed to simulate microstructure evolution in the as-deposited state for laser powder bed fusion (LPBF) process. Different features of LPBF microstructure such as segregation of secondary elements, dendrite sizes, dendritic orientation, dendritic morphology, and surface roughness are investigated and validated through comparison with experimental results. Phase-field model suggests strong dependency of dendrite orientation on surface roughness and scan speed and suggests potential of columnar flip or oriented-to-misoriented transition at higher scan speed. Segregation of the secondary elements is found to be the dominant factor in resultant dendrite width in the range of 1–3 μm. Furthermore, the developed method can easily be extended to predict the change in orientation of dendrites as new layers are built atop previous layers.

[1]  G. Caginalp,et al.  Phase-field and sharp-interface alloy models. , 1993, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[2]  L. Nastac.  A Multiscale Transient Modeling Approach for Predicting the Solidification Structure in VAR-Processed Alloy 718 Ingots , 2014, Metallurgical and Materials Transactions B.

[3]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[4]  Martin E. Glicksman,et al.  Principles of Solidification , 2011 .

[5]  Eleonora Atzeni,et al.  From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering , 2013, Materials.

[6]  Ryan R. Dehoff,et al.  Site specific control of crystallographic grain orientation through electron beam additive manufacturing , 2015 .

[8]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[9]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[10]  Heike Emmerich,et al.  Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy , 2015 .

[11]  Robert F. Sekerka,et al.  Phase-field model of solidification of a binary alloy , 1998 .

[12]  Matthias Gäumann.  Epitaxial laser metal forming of a single crystal superalloy , 1999 .

[13]  Amrita Basak,et al.  Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization , 2016, Metallurgical and Materials Transactions A.

[14]  O. Ojo,et al.  Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy , 2014 .

[15]  C. Beckermann,et al.  Phase-field simulation of the columnar-to-equiaxed transition in alloy solidification , 2006 .

[16]  H. Bhadeshia,et al.  Phase field method , 2010 .

[17]  Britta Nestler,et al.  Phase-field modelling of solute trapping during rapid solidification of a Si–As alloy , 2006 .

[18]  A. Jacot,et al.  Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence , 2003 .

[19]  Suman Das,et al.  A Microstructure Evolution Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part II) , 2014, Metallurgical and Materials Transactions B.

[20]  B. Newbury.  Thermodynamic and solidification modeling of laser welded nickel-based alloys , 2000 .

[21]  Peter D. Lee,et al.  Multiscale modelling of solidification microstructures, including microsegregation and microporosity, in an Al–Si–Cu alloy , 2004 .

[22]  J. Kruth,et al.  Finite element analysis of thermal process in direct selective laser sintering , 2001 .

[23]  Michael J. Aziz,et al.  Interface attachment kinetics in alloy solidification , 1996 .

[24]  R. Kobayashi.  Modeling and numerical simulations of dendritic crystal growth , 1993 .

[25]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[26]  S. Argyropoulos,et al.  Mathematical modelling of solidification and melting: a review , 1996 .

[27]  Sergio D. Felicelli,et al.  Modeling dendritic solidification of Al–3%Cu using cellular automaton and phase-field methods , 2013 .

[28]  J. Lane,et al.  Mechanical Properties of Fine-Grain Microcast-X Alloy 718 Investment Castings for SSME, Gas Turbine Engine, and Airframe Components , 1997 .

[29]  J. Deschamps,et al.  Directional solidification of inclined structures in thin samples , 2014 .

[30]  A. Karma,et al.  Phase-Field Simulation of Solidification , 2002 .

[31]  Michael F. Zäh,et al.  Modelling and simulation of electron beam melting , 2010, Prod. Eng..

[32]  A. Karma,et al.  Quantitative phase-field modeling of dendritic growth in two and three dimensions , 1996 .