Material engineering technique for SiOX-based embedded RRAM with CMOS compatible process

The resistive switching behavior recently observed in silicon oxide (SiOX) makes this material attractive to embedded resistive random access memory (RRAM) fabrication due to process compatibility. In SiOX-based RRAM devices, switching mechanism is closely correlated with defects in the oxides. Therefore developing a method to control the defects is necessary for performance enhancement. In this paper, a new material engineering technique for SiOX-based embedded RRAM fabrication is proposed and experimentally demonstrated. Metal-Insulator-Metal (MIM) Al/SiO2/TiN capacitor can be converted into RRAM device with nitrogen ion implantation, which is fully compatible with CMOS process. The doped MIM device exhibits stable bipolar resistive switching behavior with large OFF/ON ratio. Compared with PECVD SiOXNY resistive switching device, this material engineering technique with better control of defects density is shown to improve the low resistance uniformity of the fabricated device.

[1]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[2]  Ru Huang,et al.  Resistive switching of silicon-rich-oxide featuring high compatibility with CMOS technology for 3D stackable and embedded applications , 2011 .

[3]  Frederick T. Chen,et al.  Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM , 2008, 2008 IEEE International Electron Devices Meeting.

[4]  D. Ielmini,et al.  Self-Accelerated Thermal Dissolution Model for Reset Programming in Unipolar Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[5]  M. Fujimoto,et al.  TiO2 anatase nanolayer on TiN thin film exhibiting high-speed bipolar resistive switching , 2006 .

[6]  Byung Joon Choi,et al.  Purely Electronic Switching with High Uniformity, Resistance Tunability, and Good Retention in Pt‐Dispersed SiO2 Thin Films for ReRAM , 2011, Advanced materials.

[7]  D. Ielmini.  Filamentary-switching model in RRAM for time, energy and scaling projections , 2011, 2011 International Electron Devices Meeting.

[8]  J. Tour,et al.  Resistive switches and memories from silicon oxide. , 2010, Nano letters.

[9]  L. Larcher,et al.  Comprehensive physical modeling of forming and switching operations in HfO2 RRAM devices , 2011, 2011 International Electron Devices Meeting.

[10]  N. Xu,et al.  Oxide-based RRAM switching mechanism: A new ion-transport-recombination model , 2008, 2008 IEEE International Electron Devices Meeting.

[11]  M. Kozicki,et al.  Bipolar and Unipolar Resistive Switching in Cu-Doped $ \hbox{SiO}_{2}$ , 2007, IEEE Transactions on Electron Devices.