Calculation of bearing and common-mode voltages for the prediction of bearing failures caused by EDM currents
暂无分享,去创建一个
Yves Gemeinder | Andreas Binder | Oliver Magdun | Kersten Reis | A. Binder | Yves Gemeinder | O. Magdun | Kersten Reis
[1] A. Binder,et al. Prediction of common mode ground current in motors of inverter-based drive systems , 2007, 2007 International Aegean Conference on Electrical Machines and Power Electronics.
[2] Doyle F. Busse,et al. The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .
[3] A. Binder,et al. Scaling Effects of Inverter-Induced Bearing Currents in AC Machines , 2008, IEEE Transactions on Industry Applications.
[4] Doyle F. Busse,et al. The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.
[5] A. Muetze,et al. What can bearings bear? , 2006, IEEE Industry Applications Magazine.
[6] A. Binder,et al. Calculation of Motor Capacitances for Prediction of the Voltage Across the Bearings in Machines of Inverter-Based Drive Systems , 2007, IEEE Transactions on Industry Applications.
[7] Yves Gemeinder,et al. Representation of iron core and dielectric losses for calculation of common mode stator ground currents in inverter-fed AC machines , 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.
[8] Yves Gemeinder,et al. Prevention of harmful EDM currents in inverter-fed AC machines by use of electrostatic shields in the stator winding overhang , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.
[9] H. Tischmacher,et al. Bearing currents in converter operation , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.
[10] H. Tischmacher,et al. Bearing wear caused by converter-induced bearing currents , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.
[11] A. Harnoy,et al. Bearing Design in Machinery: Engineering Tribology and Lubrication , 2002 .
[12] Yves Gemeinder,et al. Investigation of influence of bearing load and bearing temperature on EDM bearing currents , 2010, 2010 IEEE Energy Conversion Congress and Exposition.