SEM analysis of plasma-sprayed hydroxyapatite coatings obtained with induction preheating of titanium substrate

Production of biocompatible nano-ceramic coatings is one of the major goals in prospective materials technology, particularly, in biomedical items, e.g. intraosseous implants and joint endoprostheses. Ceramic coatings obtained by the existing methods do not have the required structural properties of biocompatibility, which causes quality reduction. It has been stated that thermal induction preheating of substrate ensures the required structural organization of hydroxyapatite coating, grain size and shape in particular.

[1]  Hyoun‐Ee Kim,et al.  Biocompatibility of titanium implants modified by microarc oxidation and hydroxyapatite coating. , 2005, Journal of biomedical materials research. Part A.

[2]  F. Maury,et al.  TiOxNy coatings grown by atmospheric pressure metal organic chemical vapor deposition , 2010 .

[3]  F. Lin,et al.  Thermal reconstruction behavior of the quenched hydroxyapatite powder during reheating in air , 2000 .

[4]  E Milella,et al.  Preparation and characterisation of titania/hydroxyapatite composite coatings obtained by sol-gel process. , 2001, Biomaterials.

[5]  Ion N. Mihailescu,et al.  Pulsed Laser Deposition of Hydroxyapatite Thin Films , 2007 .

[6]  R. Ismail,et al.  Characterization of nanostructured hydroxyapatite prepared by Nd:YAG laser deposition. , 2013, Materials science & engineering. C, Materials for biological applications.

[7]  Yao Chen,et al.  Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. , 2007, Acta biomaterialia.

[8]  E. Jordan,et al.  Identification of coating deposition mechanisms in the solution-precursor plasma-spray process using model spray experiments , 2003 .

[9]  N. Petrova,et al.  Structure of Composite Biocompatible Titania Coatings Modified with Hydroxyapatite Nanoparticles , 2013 .

[10]  M. Marchese,et al.  Modeling of particles impacting on a rigid substrate under plasma spraying conditions , 1995 .

[11]  M. Sebastiani,et al.  Effect of composition on mechanical behaviour of diamond-like carbon coatings modified with titanium , 2011 .

[12]  V. S. Saji,et al.  Nanotechnology in biomedical applications: a review , 2010 .

[13]  Sen Yang,et al.  Adhesion strength of plasma-sprayed hydroxyapatite coatings on laser gas-nitrided pure titanium , 2009 .

[14]  N. Charoenphandhu,et al.  Biocomposite of hydroxyapatite-titania rods (HApTiR): physical properties and in vitro study. , 2013, Materials science & engineering. C, Materials for biological applications.

[15]  L. Pawłowski,et al.  Experimental design of plasma spraying and laser treatment of hydroxyapatite coatings , 2006 .

[16]  N. Dahotre,et al.  Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies , 2009 .

[17]  B. Peng,et al.  The effect of alginate addition on the structure and morphology of hydroxyapatite/gelatin nanocomposites , 2006 .

[18]  Sergey V. Dorozhkin,et al.  Bioceramics of calcium orthophosphates. , 2010, Biomaterials.

[19]  S. B. Wenig,et al.  Nanocrystalline structure of the surface layer of plasma-sprayed hydroxyapatite coatings obtained upon preliminary induction heat treatment of metal base , 2012 .

[20]  Gary J. Cheng,et al.  Laser engineered multilayer coating of biphasic calcium phosphate/titanium nanocomposite on metal substrates. , 2011, ACS Applied Materials and Interfaces.

[21]  A. Fomin,et al.  Properties of titanium dioxide coatings produced by induction-thermal oxidation of VT1-00 alloy , 2014 .

[22]  Satya Prakash,et al.  Surface characterization of plasma sprayed pure and reinforced hydroxyapatite coating on Ti6Al4V alloy , 2011 .

[23]  Lech Pawlowski,et al.  Finely grained nanometric and submicrometric coatings by thermal spraying: A review , 2008 .