Stochastic modeling of preform heterogeneity to address dry spots formation in the VARTM Process

[1]  S. Advani,et al.  Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding. Part I: design and algorithm development , 2004 .

[2]  Suresh G. Advani,et al.  Desirable features in mold filling simulations for Liquid Composite Molding processes , 2004 .

[3]  S. Advani,et al.  Filling of a System of Channels and Porous Medium: An Effectiveness Factor Based on Momentum Transfer , 2003 .

[4]  Hugo Sol,et al.  New set-up for measurement of permeability properties of fibrous reinforcements for RTM , 2002 .

[5]  Suresh G. Advani,et al.  A Method to Determine 3D Permeability of Fibrous Reinforcements , 2002 .

[6]  J. Seferis,et al.  Prepreg characteristics and processing: Influence of glass and carbon fabric reinforcements , 2002 .

[7]  M. Clifford,et al.  Void Content Measurements in Commingled E-Glass/ Polypropylene Composites Using Image Analysis from Optical Micrographs , 2002 .

[8]  V. Michaud,et al.  Impregnation of Compressible Fiber Mats with a Thermoplastic Resin. Part II: Experiments , 2001 .

[9]  K. Wei,et al.  Effect of material and process variables on the performance of resin-transfer-molded epoxy fabric composites , 2000 .

[10]  K. Wei,et al.  Resin transfer molding (RTM) process of a high performance epoxy resin. II : Effects of process variables on the physical, static and dynamic mechanical behavior , 2000 .

[11]  James J.C. Busfield,et al.  Finite Element Assisted Modelling of the Microscopic Impregnation Process in Thermoplastic Preforms , 1998 .

[12]  Suresh G. Advani,et al.  Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding process , 1998 .

[13]  Suresh G. Advani,et al.  The effect of micro-structure variations on the permeability of preform materials , 1998 .

[14]  R. McIlhagger,et al.  Investigations into various methods of liquid injection to achieve mouldings with minimum void contents and full wet out , 1998 .

[15]  K. D. Fickie,et al.  A Fast Numerical Method for Isothermal Resin Transfer Mold Filling , 1996 .

[16]  Suresh G. Advani,et al.  Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot prediction , 1996 .

[17]  A. De Wit,et al.  Correlation structure dependence of the effective permeability of heterogeneous porous media , 1995 .

[18]  Suresh G. Advani,et al.  Numerical and analytical study to estimate the effect of two length scales upon the permeability of a fibrous porous medium , 1995 .

[19]  Suresh G. Advani,et al.  A numerical approach to model non‐isothermal viscous flow through fibrous media with free surfaces , 1994 .

[20]  Z. Cai,et al.  Numerical simulation on the permeability variations of a fiber assembly , 1993 .

[21]  Yoram Rubin,et al.  Mapping permeability in heterogeneous aquifers using hydrologic and seismic data , 1992 .

[22]  Donald G. Baird,et al.  An Impregnation Model for the Preparation of Thermoplastic Prepregs , 1992 .

[23]  M. V. Bruschke,et al.  A finite element/control volume approach to mold filling in anisotropic porous media , 1990 .

[24]  Allan L. Gutjahr,et al.  Stochastic analysis of spatial variability in subsurface flows: 1. Comparison of one‐ and three‐dimensional flows , 1978 .

[25]  E. M. Lifshitz,et al.  Electrodynamics of continuous media , 1961 .