Modeling of Hot-Mix Asphalt Compaction: A Thermodynamics-Based Compressible Viscoelastic Model

Compaction is the process of reducing the volume of hot-mix asphalt (HMA) by the application of external forces. As a result of compaction, the volume of air voids decreases, aggregate interlock increases, and interparticle friction increases. The quality of field compaction of HMA is one of the most important elements influencing asphalt pavement performance. Poor compaction has been associated with asphalt bleeding in hot weather, moisture damage, excessive aging and associated cracking, and premature permanent deformation. This study was conducted to develop a model within the context of a thermomechanical framework for the compaction of asphalt mixtures. The asphalt mixture was modeled as a nonlinear compressible material exhibiting time-dependent properties. A numerical scheme based on finite elements was employed to solve the equations governing compaction mechanisms. The material model was implemented in the Computer Aided Pavement Analysis (CAPA-3D) finite-element (FE) package. Due to the difficulty of conducting tests on the mixture at the compaction temperature, a procedure was developed to determine the model’s parameters from the analysis of the Superpave® gyratory compaction curves. A number of mixtures were compacted in the Superpave® gyratory compactor using an angle of 1.25 degrees in order to determine the model’s parameters. Consequently, the model was used to predict the compaction curves of mixtures compacted using a 2-degree angle of gyration. The model compared reasonably well with the compaction curves. FE simulations of the compaction of several pavement sections were conducted in this study. The results demonstrated the potential of the material model to represent asphalt mixture field compaction. The developed model is a useful tool for simulating the compaction of asphalt mixtures under laboratory and field conditions. In addition, it can be used to determine the influence of various material properties and mixture designs on the model’s parameters and mixture compactability.

[1]  M. Reiner,et al.  Building materials, their elasticity and inelasticity , 1954 .

[2]  Jacob Uzan,et al.  VISCO-ELASTO-PLASTIC CONSTITUTIVE LAW FOR A BITUMINOUS MIXTURE UNDER REPEATED LOADING , 1983 .

[3]  C. Lakshmana Rao,et al.  Permeability and bleeding of asphalt concrete using mixture theory , 2001 .

[4]  J Eisenmann,et al.  INFLUENCE OF WHEEL LOAD AND INFLATION PRESSURE ON THE RUTTING EFFECT AT ASPHALT-PAVEMENTS - EXPERIMENTS AND THEORETICAL INVESTIGATIONS. SIXTH INTERNATIONAL CONFERENCE, STRUCTURAL DESIGN OF ASPHALT PAVEMENTS, VOLUME I, PROCEEDINGS, UNIVERSITY OF MICHIGAN, JULY 13-17, 1987, ANN ARBOR, MICHIGAN , 1987 .

[5]  Peter J. Bosscher,et al.  A Porous Elasto-Plastic Compaction Model for Asphalt Mixtures with Parameter Estimation Algorithm , 2003 .

[6]  Eyad Masad,et al.  Internal Structure Characterization of Asphalt Concrete Using Image Analysis , 1999 .

[7]  John T Harvey,et al.  Effects of laboratory asphalt concrete specimen preparation variables on fatigue and permanent deformation test results using strategic highway research program A-003A proposed testing equipment , 1993 .

[8]  Emad Abdel-Rahman Ahmed Kassem.  Compaction Effects on Uniformity, Moisture Diffusion, and Mechanical Properties of Asphalt Pavements , 2011 .

[9]  Athanasios Scarpas,et al.  A Mechanics based Computational Platform for Pavement Engineering , 2005 .

[10]  Andy Collop,et al.  Viscoelastic approach to rutting in flexible pavements , 1995 .

[11]  Viscoelastic Constitutive Equation for Sand-Asphalt Mixtures , 1968 .

[12]  Prithvi S. Kandhal,et al.  Hot Mix Asphalt Materials, Mixture Design and Construction , 1996 .

[13]  Y. H. Huang.  Deformation and Volume Change Characteristics of A Sand-Asphalt Mixture Under Constant Direct and Triaxial Compressive Stresses , 1967 .

[14]  R.N.J. Saal,et al.  CHAPTER 9 – RHEOLOGICAL PROPERTIES OF ASPHALTS , 1958 .

[15]  Carl L. Monismith,et al.  Analysis and Interrelation of Stress‐Strain‐Time Data for Asphalt Concrete , 1964 .

[16]  E. Krokosky,et al.  STRESS RELAXATION OF BITUMINOUS CONCRETE IN TENSION , 1965 .

[17]  Eyad Masad,et al.  A thermomechanical framework for modeling the compaction of asphalt mixes , 2008 .

[18]  Kumbakonam R. Rajagopal,et al.  On the mechanical behavior of asphalt , 2005 .

[19]  Arun R. Srinivasa,et al.  On the thermomechanics of materials that have multiple natural configurations , 2004 .

[20]  Charles A Pagen,et al.  RHEOLOGICAL RESPONSE OF BITUMINOUS CONCRETE , 1965 .

[21]  K. Bathe.  Finite Element Procedures , 1995 .

[22]  C. Poel.  On the rheology of concentrated dispersions , 1958 .

[23]  A. Fröhlich,et al.  Theory of the rheological properties of dispersions , 1946, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[24]  C. Lakshmana Rao,et al.  Mechanics of air voids reduction of asphalt concrete using mixture theory , 2000 .

[25]  Markus Reiner,et al.  Deformation, strain and flow: An elementary introduction to rheology , 1969 .

[26]  Tom Scarpas,et al.  Modeling of Asphalt Mixture Laboratory and Field Compaction Using a Thermodynamics Framework , 2009 .

[27]  Melvin J. Dubnick.  Army Corps of Engineers , 1998 .

[28]  Harold L Von Quintus,et al.  COMPARATIVE EVALUATION OF LABORATORY COMPACTION DEVICES BASED ON THEIR ABILITY TO PRODUCE MIXTURES WITH ENGINEERING PROPERTIES SIMILAR TO THOSE PRODUCED IN THE FIELD , 1989 .

[29]  D. Little,et al.  ONE-DIMENSIONAL CONSTITUTIVE MODELING OF ASPHALT CONCRETE , 1990 .

[30]  K. Rajagopal,et al.  Review of the uses and modeling of bitumen from ancient to modern times , 2003 .

[31]  C L Monismith,et al.  RHEOLOGIC BEHAVIOR OF ASPHALT CONCRETE , 1966 .

[32]  M S Snaith,et al.  THE PERMANENT DEFORMATION CHARACTERISTICS OF A DENSE BITUMEN MACADAM SUBJECTED TO REPEATED LOADING , 1974 .

[33]  J. Barbera,et al.  Contact mechanics , 1999 .

[34]  V. Deshpande,et al.  Uniaxial Experiments on Idealized Asphalt Mixes , 2000 .

[35]  Eyad Masad,et al.  Comparing Superpave Gyratory Compactor Data to Field Cores , 2004 .

[36]  L. W. Nijboer,et al.  Plasticity as a factor in the design of dense bituminous road carpets , 1948 .

[37]  L. J. Sluys,et al.  Wave propagation, localisation and dispersion in softening solids : proefschrift , 1992 .

[38]  Arun R. Srinivasa,et al.  On the thermomechanics of materials that have multiple natural configurations Part I: Viscoelasticity and classical plasticity , 2004 .

[39]  David Cebon,et al.  Isolated contact model of an idealized asphalt mix , 1999 .

[40]  David Cebon,et al.  Steady-state constitutive relationship for idealised asphalt mixes , 1999 .

[41]  R. Blanc.  Rheology of concentrated dispersions , 1986 .

[42]  C L Monismith,et al.  VISCOELASTIC BEHAVIOR OF ASPHALT CONCRETE PAVEMENTS , 1962 .

[43]  Delia Florea,et al.  Nonassociated elastic/viscoplastic model for bituminous concrete , 1994 .

[44]  Mustaque Hossain,et al.  Intelligent Compaction Control of Highway Embankment Soil , 2007 .

[45]  J. Auriault,et al.  Dynamic behaviour of porous media saturated by a viscoelastic fluid. Application to bituminous concretes , 1990 .

[46]  E. Masad,et al.  Internal structure analysis of asphalt mixes to improve the simulation of Superpave gyratory compaction to field conditions , 2001 .