Minimizing damage and contamination in RIE processes by extracted-plasma-parameter analysis

It is reported that important plasma parameters for reactive ion etching (RIE) processes, such as ion energy and ion flux density, can be extracted from a simple RF waveform analysis at the excitation electrode in a conventional cathode-coupled, parallel-plate plasma RIE system. This analysis does not introduce any contamination or disturbances to the process. By using the extracted plasma parameters, surface damage and contamination in Si substrates induced by reactive ion etching in a SiCl/sub 4/ plasma were investigated. Optimum RIE conditions were then confirmed by studying the relationship between these parameters and the etching performance. It is shown using the experimental data that low-energy high-flux etching is the direction for high performance RIE in future ULSI fabrication. >

[1]  Tadahiro Ohmi,et al.  Anisotropic etching of n+ polycrystalline silicon with high selectivity using a chlorine and nitrogen plasma in an ultraclean electron cyclotron resonance etcher , 1990 .

[2]  Tadahiro Ohmi,et al.  Directional etching of Si with perfect selectivity to SiO2 using an ultraclean electron cyclotron resonance plasma , 1990 .

[3]  Tadahiro Ohmi,et al.  Future trends and applications of ultra-clean technology , 1989, International Technical Digest on Electron Devices Meeting.

[4]  Tadahiro Ohmi,et al.  Formation of device‐grade epitaxial silicon films at extremely low temperatures by low‐energy bias sputtering , 1989 .

[5]  F. Moghadam,et al.  A study of contamination and damage on Si surfaces induced by dry etching , 1989 .

[6]  Tadahiro Ohmi,et al.  Crystal structure analysis of epitaxial silicon films formed by a low kinetic energy particle process , 1989 .

[7]  Tadashi Shibata,et al.  Electrical characterization of epitaxial silicon films formed by a low kinetic energy particle process , 1989 .

[8]  Tadahiro Ohmi,et al.  Low-temperature silicon epitaxy by low-energy bias sputtering , 1988 .

[9]  Kazunori Tsujimoto,et al.  Low‐temperature reactive ion etching and microwave plasma etching of silicon , 1988 .

[10]  S. Berg,et al.  Oxide Breakdown due to Charge Accumulation during Plasma Etching , 1987 .

[11]  J. Coburn,et al.  Frequency dependence of ion bombardment of grounded surfaces in rf argon glow discharges in a planar system , 1985 .

[12]  Y. H. Lee,et al.  Study of silicon contamination and near‐surface damage caused by CF4/H2 reactive ion etching , 1984 .

[13]  Stella W. Pang,et al.  DRY ETCHING INDUCED DAMAGE IN Si AND GaAs. , 1984 .

[14]  D. J. Silversmith,et al.  Damage induced in Si by ion milling or reactive ion etching , 1983 .

[15]  R. Gdula The effects of processing on radiation damage in SiO2 , 1979, IEEE Transactions on Electron Devices.

[16]  M. W. Jenkins A New Preferential Etch for Defects in Silicon Crystals , 1977 .

[17]  J. Coburn,et al.  Positive‐ion bombardment of substrates in rf diode glow discharge sputtering , 1972 .

[18]  P. Scheiblin,et al.  Silicon damage and residue overlayer caused by rie and ribe processes with CHF3 , 1989 .

[19]  Tadahiro Ohmi,et al.  Perfect-Selectivity Directional Etching of Silicon Using Ultraclean ECR Plasma , 1989 .

[20]  H. Kawakami,et al.  Low Temperature Microwave Plasma Etching , 1988 .

[21]  J. Coburn,et al.  Plasma potentials of 13.56-MHz rf argon glow discharges in a planar system , 1985 .