Ultrasonic Time-of-Flight Computed Tomography for Investigation of Batch Crystallisation Processes

Crystallisation is a crucial step in many industrial processes. Many sensors are being investigated for monitoring such processes to enhance the efficiency of them. Ultrasound techniques have been used for particle sizing characterization of liquid suspensions, in crystallisation process. An ultrasound tomography system with an array of ultrasound sensors can provide spatial information inside the process when compared to single-measurement systems. In this study, the batch crystallisation experiments have been conducted in a lab-scale reactor in calcium carbonate crystallisation. Real-time ultrasound tomographic imaging is done via a contactless ultrasound tomography sensor array. The effect of the injection rate and the stirring speed was considered as two control parameters in these crystallisation functions. Transmission mode ultrasound tomography comprises 32 piezoelectric transducers with central frequency of 40 kHz has been used. The process-based experimental investigation shows the capability of the proposed ultrasound tomography system for crystallisation process monitoring. Information on process dynamics, as well as process malfunction, can be obtained via the ultrasound tomography system.

[1]  Soheil Aghajanian,et al.  Process Monitoring of Antisolvent Based Crystallization in Low Conductivity Solutions Using Electrical Impedance Spectroscopy and 2-D Electrical Resistance Tomography , 2020, Applied Sciences.

[2]  Kevin J. Roberts,et al.  An in-situ synchrotron X-ray diffraction tomography study of crystallization and preferred crystal orientation in a stirred reactor , 2005 .

[3]  Judith Ann Bamberger,et al.  Using ultrasonic attenuation to monitor slurry mixing in real time. , 2004, Ultrasonics.

[4]  Z. Li.  A study on ultrasonic echo tomography for non-destructive evaluation of hardened cementitious concrete , 2020 .

[5]  John E. Peterson,et al.  Beyond ray tomography: Wavepaths and Fresnel volumes , 1995 .

[6]  J J Vaquero,et al.  Fluorescence diffuse optical tomography using the split Bregman method. , 2011, Medical physics.

[7]  Ming Yang,et al.  Real-time ultrasound process tomography for two-phase flow imaging using a reduced number of transducers , 1999, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Podd,et al.  Ultrasound process tomography system for hydrocyclones , 2000, Ultrasonics.

[9]  A. Prakash,et al.  Characterization of slurry systems by ultrasonic techniques , 2001 .

[10]  Åke C. Rasmuson,et al.  Mesomixing in semi-batch reaction crystallization and influence of reactor size , 2004 .

[12]  F. J. Dickin,et al.  Imaging stirred‐vessel macromixing using electrical resistance tomography , 1998 .

[13]  Yanlin Zhao,et al.  On-line monitoring of the crystallization process: relationship between crystal size and electrical impedance spectra , 2016 .

[14]  B. Glennon,et al.  The role of meso-mixing in anti-solvent crystallization processes , 2011 .

[15]  Madhavi V. Sardeshpande,et al.  Mixing studies in unbaffled stirred tank reactor using electrical resistance tomography , 2016 .

[17]  Richard E. Challis,et al.  Monitoring the crystallization from solution of a reactive dye by ultrasound , 2000 .

[18]  Manuchehr Soleimani,et al.  A Quantitative Ultrasonic Travel-Time Tomography to Investigate Liquid Elaborations in Industrial Processes , 2019, Italian National Conference on Sensors.

[19]  Ken Primrose,et al.  Super-sensing technology: industrial applications and future challenges of electrical tomography , 2016, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[20]  T. Rymarczyk,et al.  Innovative methods of neural reconstruction for tomographic images in maintenance of tank industrial reactors , 2019, Ekspolatacja i Niezawodnosc - Maintenance and Reliability.

[22]  Å. Rasmuson,et al.  Importance of macromixing in batch cooling crystallization , 1996 .

[23]  K. Roberts,et al.  On-line monitoring of a crystallization process , 2003 .

[24]  Miguel Ángel García Izquierdo,et al.  Ultrasound Transmission Tomography for Detecting and Measuring Cylindrical Objects Embedded in Concrete , 2017, Sensors.

[25]  Xiao Li,et al.  An Ultrasonic Transmission/Reflection Tomography System for Industrial Multiphase Flow Imaging , 2019, IEEE Transactions on Industrial Electronics.

[26]  B. S. Hoyle,et al.  Parallel Image Reconstruction in Real-Time Ultrasound Process Tomography for Two-phased Flow Measurements , 1997, Real Time Imaging.

[27]  Krzysztof Schabowicz,et al.  Ultrasonic tomography – The latest nondestructive technique for testing concrete members – Description, test methodology, application example , 2014 .

[28]  M. Mehrvar,et al.  Study of solid―liquid mixing in agitated tanks through electrical resistance tomography , 2010 .

[29]  Zulkarnay Zakaria,et al.  Design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture , 2008 .

[30]  M. Vauhkonen,et al.  Experimental investigation of reagent feeding point location in a semi-batch precipitation process , 2018, Chemical Engineering Science.

[31]  Massimo Morbidelli,et al.  In-Situ Monitoring of Batch Crystallization by Ultrasound Spectroscopy , 2000 .

[32]  Mi Wang,et al.  Visualization of Gas–Oil–Water Flow in Horizontal Pipeline Using Dual-Modality Electrical Tomographic Systems , 2017, IEEE Sensors Journal.

[33]  Knud Skou Cordua,et al.  SIPPI: A Matlab toolbox for sampling the solution to inverse problems with complex prior information: Part 1 - Methodology , 2013, Comput. Geosci..

[34]  Y. Kravtsov,et al.  Geometrical optics of inhomogeneous media , 2019, Geometrical Optics of Weakly Anisotropic Media.

[35]  Leyla Özkan,et al.  Monitoring of Batch Industrial Crystallization with Growth, Nucleation, and Agglomeration. Part 2: Structure Design for State Estimation with Secondary Measurements , 2017, Industrial & engineering chemistry research.

[36]  G. Bolton,et al.  An overview of electrical tomographic measurements in pharmaceutical and related application areas , 2005, AAPS PharmSciTech.

[37]  Nicole Bauer,et al.  Industrial Crystallization Process Simulation Analysis And Design , 2016 .

[38]  Soheil Aghajanian,et al.  Dynamic modeling and semibatch reactive crystallization of calcium carbonate through CO2 capture in highly alkaline water , 2020 .

[39]  Michael B. Porter,et al.  Computational Ocean Acoustics , 1994 .

[40]  Manuchehr Soleimani,et al.  Total Variation Regularization With Split Bregman-Based Method in Magnetic Induction Tomography Using Experimental Data , 2017, IEEE Sensors Journal.

[41]  Partha S. Routh,et al.  Crosshole radar velocity tomography with finite-frequency Fresnel volume sensitivities , 2008 .

[42]  Bo Holm Jacobsen,et al.  Sensitivity Kernels for Time-Distance Inversion , 2000 .

[43]  M. S. Greenwood.  Particle size and density of a slurry from ultrasonic backscattering measurements at a solid interface. , 2012, The Review of scientific instruments.