Induction motors direct field oriented control with robust on-line tuning of rotor resistance

This paper proposes an alternative rotor resistance identification method used in the frame of a direct field oriented control (DFOC) of induction motors. The authors investigate the use of the induction motor instantaneous reactive power for rotor resistance identification on the basis of the model reference adaptive system (MRAS) method. In fact, from a practical point of view, the instantaneous reactive power can give quite sufficient real time information on the induction motor behavior. The proposed identification method can be achieved with on-line tuning of the inverse rotor time constant with robustness against stator resistance variation. Computer simulations are given to highlight the feasibility, the simplicity, and the robustness of the proposed method.

[1]  A. S. Bharadwaj,et al.  A review of parameter sensitivity and adaptation in indirect vector controlled induction motor drive systems , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[2]  M. Depenbrock,et al.  Determination of the induction machine parameters and their dependencies on saturation , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[3]  R. Beguenane,et al.  Induction motors thermal monitoring by means of rotor resistance identification , 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

[4]  M. Tadjine,et al.  Speed and rotor time constant estimation via MRAS strategy for induction motor drives , 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

[5]  H. Kubota,et al.  DSP-based speed adaptive flux observer of induction motor , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[6]  Thomas A. Lipo,et al.  An automated rotor time-constant measurement system for indirect field-oriented drives , 1988 .

[7]  Tadashi Fukao,et al.  Robust vector control of induction motor without using stator and rotor circuit time constants , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[8]  Kouhei Ohnishi,et al.  Model Reference Adaptive System Against Rotor Resistance Variation in Induction Motor Drive , 1986, IEEE Transactions on Industrial Electronics.

[9]  Toshihiko Noguchi,et al.  Field-oriented control of an induction motor with robust on-line tuning of its parameters , 1997 .

[10]  M.E.H. Benbouzid,et al.  H-G diagram based rotor parameters identification for induction motors thermal monitoring , 2000 .

[11]  T.M. Rowan,et al.  A simple on-line adaptation for indirect field orientation of an induction machine , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[12]  Luis J. Garces.  Parameter Adaption for the Speed-Controlled Static AC Drive with a Squirrel-Cage Induction Motor , 1980, IEEE Transactions on Industry Applications.