Ultrafast laser micromachining of silica aerogels

Silica aerogels are unique nanostructured materials that possess many distinctive qualities, including extremely low densities and thermal conductivities, very high surface-area-to-volume ratios, and large strength-to-weight ratios. Aerogels, however, are very brittle, and are not readily shaped using traditional machining operations. Ultrafast laser processing may provide an alternative for precision shaping and machining of these materials. This paper discusses investigations of ultrafast laser machining of aerogels for material removal and micromachining. The advantages of ultrafast laser processing include a minimal thermal penetration region and low processing temperatures, precision removal of material, and good-quality feature definition. In this work, an amplified femtosecond Ti:sapphire laser system is used to investigate the breakdown threshold, material removal rate per pulse, and specific issues associated with laser processing of aerogels, as well as recommendations for further investigations for these unique materials.

[1]  Gerard Mourou,et al.  SHORT-PULSE LASER DAMAGE IN TRANSPARENT MATERIALS AS A FUNCTION OF PULSE DURATION , 1999 .

[2]  Perry,et al.  Nanosecond-to-femtosecond laser-induced breakdown in dielectrics. , 1996, Physical review. B, Condensed matter.

[3]  G. Mourou,et al.  Femtosecond Optical Breakdown in Dielectrics , 1998 .

[4]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.

[5]  G. Mourou,et al.  Laser ablation and micromachining with ultrashort laser pulses , 1997 .

[6]  B J Schwartz,et al.  Single-shot two-photon exposure of commercial photoresist for the production of three-dimensional structures. , 1998, Optics letters.

[7]  David Ashkenasi,et al.  Laser-induced damage in SiO2 and CaF2 with picosecond and femtosecond laser pulses , 1996 .

[8]  Brent C. Stuart,et al.  Ultrashort-pulse laser machining of dielectric materials , 1999 .

[9]  Gerard Mourou,et al.  Laser‐induced breakdown by impact ionization in SiO2 with pulse widths from 7 ns to 150 fs , 1994 .

[10]  F. Schwertfeger,et al.  Applications for silica aerogel products , 1998 .

[11]  Gerard Pajonk,et al.  Transparent silica aerogels , 1998 .

[12]  E. Campbell,et al.  Micromachining of quartz with ultrashort laser pulses , 1997 .

[13]  Kelly E. Parmenter,et al.  Mechanical properties of silica aerogels , 1998 .

[14]  David Ashkenasi,et al.  Pulse-width influence on laser structuring of dielectrics , 1997 .

[15]  M. D. Shirk,et al.  A review of ultrashort pulsed laser ablation of materials , 1998 .

[16]  D. Hammer,et al.  Laser-induced breakdown in aqueous media , 1997 .

[17]  J. Fricke,et al.  Aerogels—Recent Progress in Production Techniques and Novel Applications , 1998 .