Assessment of Isolated and Non-Isolated DC-DC Converters for Medium-Voltage PV Applications

The potential of Photovoltaic (PV) panels as a main tool of harnessing solar energy is increasing with the advancements in their power conditioning and conversion stages that vary based on applications. This paper focuses on the conversion of a 22kW PV array output from low-voltage to medium-voltage level (400V to 7kV). This high voltage conversion ratio is difficult to achieve using conventional single-stage DC-DC converters. Thus, different alternatives are proposed and compared here, namely, the Parallel-Input Series-Output (PISO) connection of two different stages using both isolated (full-bridge) and non-isolated DC-DC converters. The converters are compared on the basis of efficiency, footprint, components rating and reliability. Thus, the isolated DC-DC converter system efficiency was estimated at 797%, compared to 93 % for the non-isolated system, keeping into account the variations in terms of the filtering capacitor requirements to maintain a constant minimal voltage ripple at the output which is in favor of the non-isolated systems.

[1]  Ahmed Massoud,et al.  Modelling of DC-DC converters with continuous input current for high power PV applications , 2016, 2016 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE).

[2]  Ji-Yoon Yoo,et al.  A Novel Topology for Photovoltaic DC/DC Full-Bridge Converter With Flat Efficiency Under Wide PV Module Voltage and Load Range , 2008, IEEE Transactions on Industrial Electronics.

[3]  Barry W. Williams,et al.  DC-to-DC Converter With Low Input Current Ripple for Maximum Photovoltaic Power Extraction , 2015, IEEE Transactions on Industrial Electronics.

[4]  Ahmed M. Massoud,et al.  Multiple-Module High-Gain High-Voltage DC–DC Transformers for Offshore Wind Energy Systems , 2011, IEEE Transactions on Industrial Electronics.

[5]  Timothy C. Green,et al.  The Modular Multilevel Converter for High Step-Up Ratio DC–DC Conversion , 2015, IEEE Transactions on Industrial Electronics.

[6]  K. Deepa,et al.  Half bridge Converter for Battery Charging Application , 2012 .

[7]  Jian Guo Zhu,et al.  Performance analysis of full bridge, boost half bridge and half bridge topologies for application in phase shift converters , 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).

[8]  Zhe Chen,et al.  A Double Uneven Power Converter-Based DC–DC Converter for High-Power DC Grid Systems , 2015, IEEE Transactions on Industrial Electronics.

[9]  Nilesh M. Bonde,et al.  A Step-up Resonant Converter for Grid-Connected Renewable Energy Sources , 2018, 2018 International Conference on Smart City and Emerging Technology (ICSCET).

[10]  B. W. Williams,et al.  DC-to-DC Converters With Continuous Input and Output Power , 2013, IEEE Transactions on Power Electronics.

[11]  Jin Jiang,et al.  A Power Management Strategy for PV/Battery Hybrid Systems in Islanded Microgrids , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[12]  J. W. Kolar,et al.  Optimal design of a 3.5 kV/11kW DC-DC converter for charging capacitor banks of power modulators , 2009, 2009 IEEE Pulsed Power Conference.

[13]  Luiz Henrique S. C. Barreto,et al.  High-Voltage Gain Boost Converter Based on Three-State Commutation Cell for Battery Charging Using PV Panels in a Single Conversion Stage , 2014, IEEE Transactions on Power Electronics.

[14]  Ping Wang,et al.  Interleaved High-Conversion-Ratio Bidirectional DC–DC Converter for Distributed Energy-Storage Systems—Circuit Generation, Analysis, and Design , 2016, IEEE Transactions on Power Electronics.

[15]  Wuhua Li,et al.  Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications , 2011, IEEE Transactions on Industrial Electronics.