A Review on Scramjet Engine

[1]  Silong Zhang,et al.  Flowing residence characteristics in a dual-mode scramjet combustor equipped with strut flame holder , 2020 .

[2]  S. O’Byrne,et al.  The Effect of Fuel Injection Location on Supersonic Hydrogen Combustion in a Cavity-Based Model Scramjet Combustor , 2020, Energies.

[3]  Hong-bo Wang,et al.  Mixing and combustion characteristics in a cavity-based supersonic combustor with different injection schemes , 2019, Acta Astronautica.

[4]  Wei Huang,et al.  Recent advances in cavity-based scramjet engine- a brief review , 2019, International Journal of Hydrogen Energy.

[5]  Zhenguo Wang,et al.  The ignition characteristics of the close dual-point laser ignition in a cavity based scramjet combustor , 2019, Experimental Thermal and Fluid Science.

[6]  Gautam Choubey,et al.  Composite materials used in Scramjet- A Review , 2018 .

[7]  Zhenguo Wang,et al.  Experiments on flame stabilization in a scramjet combustor with a rear-wall-expansion cavity , 2017 .

[8]  Gautam Choubey,et al.  Effect of different strut + wall injection techniques on the performance of two-strut scramjet combustor , 2017 .

[9]  Obula Reddy Kummitha,et al.  Numerical analysis of scramjet combustor with innovative strut and fuel injection techniques , 2017 .

[10]  Lei Shi,et al.  Simulations of combustion oscillation and flame dynamics in a strut-based supersonic combustor , 2017 .

[11]  A. De,et al.  Investigation of strut-ramp injector in a Scramjet combustor: Effect of strut geometry, fuel and jet diameter on mixing characteristics , 2017, 2102.13275.

[12]  Xi-yun Lu,et al.  Large-eddy simulation of a pulsed jet into a supersonic crossflow , 2016 .

[13]  Wei Huang,et al.  Mixing augmentation mechanism induced by the pseudo shock wave in transverse gaseous injection flow fields , 2016 .

[14]  Wei Huang.  Transverse jet in supersonic crossflows , 2016 .

[15]  Corin Segal,et al.  Cavity-based flameholding for chemically-reacting supersonic flows , 2015 .

[16]  Haiyan Wu,et al.  Combustion modes of hydrogen jet combustion in a cavity-based supersonic combustor , 2013 .

[17]  Adrian S. Pudsey,et al.  Influence of common modeling choices for high-speed transverse jet-interaction simulations , 2013 .

[18]  Zhenguo Wang,et al.  Numerical prediction on the interaction between the incident shock wave and the transverse slot injection in supersonic flows , 2013 .

[19]  Li Yan,et al.  Numerical validation and parametric investigation on the cold flow field of a typical cavity-based scramjet combustor , 2012 .

[20]  Soo-Seok Yang,et al.  Effects of Flameholder Configurations on Combustion in Scramjet Engines , 2012 .

[21]  Wei Huang,et al.  Effect of cavity flame holder configuration on combustion flow field performance of integrated hypersonic vehicle , 2010 .

[22]  J. Qin,et al.  Effect of cooling channel geometry on re-cooled cycle performance for hydrogen fueled scramjet , 2010 .

[23]  Debasis Chakraborty,et al.  Liquid-Fueled Strut-Based Scramjet Combustor Design: A Computational Fluid Dynamics Approach , 2008 .

[24]  Manfred Aigner,et al.  Numerical Investigation of Mixing and Combustion Enhancement in Supersonic Combustors by Strut Induced Streamwise Vorticity , 2008 .

[25]  Sang-Hyeon Lee,et al.  Characteristics of Dual Transverse Injection in Scramjet Combustor, Part 1: Mixing , 2006 .

[26]  Tarek Abdel-Salam,et al.  Effects of Ramp Side Angle in Supersonic Mixing , 2003 .

[27]  Jean P. Sislian,et al.  Numerical Investigation of the Turbulent Mixing Performance of a Cantilevered Ramp Injector , 2002 .

[28]  Ronald K. Hanson,et al.  Cavity Flame-Holders for Ignition and Flame Stabilization in Scramjets: An Overview , 2001 .

[29]  James D Holdeman,et al.  Mixing of multiple jets with a confined subsonic crossflow , 1996 .