Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy
暂无分享,去创建一个
António Pereira | Paulo Jorge Da Silva bartolo | Altino Loureiro | J.A.M. Ferreira | José Costa | José Costa | P. Bártolo | A. Loureiro | J. Ferreira | António Pereira | J. Costa
[1] António Pereira,et al. Study on the fatigue strength of AA 6082-T6 adhesive lap joints , 2009 .
[2] Majid Pouranvari,et al. Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel , 2009 .
[3] Thomas Pardoen,et al. Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6 , 2008 .
[4] Xin Sun,et al. Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high-strength steel spot welds , 2008 .
[5] M. Pouranvari,et al. Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels , 2008 .
[6] A. Deschamps,et al. The strength of friction stir welded and friction stir processed aluminium alloys , 2008 .
[7] D. Sun,et al. Microstructures and mechanical properties of resistance spot welded magnesium alloy joints , 2007 .
[8] D. Murizam. Study of Spot Welding of Austenitic Stainless Steel Type 304 , 2007 .
[9] Majid Pouranvari,et al. Effect of weld nugget size on overload failure mode of resistance spot welds , 2007 .
[10] Yuyuan Zhao,et al. Correlation of Strength with Hardness and Electrical Conductivity for Aluminium Alloy 7010 , 2006 .
[11] M. Vural,et al. Effect of welding nugget diameter on the fatigue strength of the resistance spot welded joints of different steel sheets , 2006 .
[12] Gary S. Was,et al. The relationship between hardness and yield stress in irradiated austenitic and ferritic steels , 2005 .
[13] M. Vural,et al. On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic stainless steel sheets , 2004 .
[14] Paulo A.F. Martins,et al. Weld bonding of stainless steel , 2004 .
[15] Min Jou,et al. Real time monitoring weld quality of resistance spot welding for the fabrication of sheet metal assemblies , 2003 .
[16] Birgit Skrotzki,et al. Characterization of a friction-stir-welded aluminum alloy 6013 , 2002 .
[17] I. R. Pashby,et al. Joining techniques for aluminium spaceframes used in automobiles , 2000 .
[18] Saied Darwish,et al. Micro-hardness of spot welded (B.S. 1050) commercial aluminium as correlated with welding variables and strength attributes , 1999 .
[19] D. J. Browne,et al. Computer simulation of resistance spot welding in aluminum: Part 1 , 1995 .
[20] Robert Thompson,et al. Static and Impact Strengths of Spot-Welded HSLA and Low Carbon Steel Joints , 1982 .
[21] D. Özyürek. An effect of weld current and weld atmosphere on the resistance spot weldability of 304L austenitic stainless steel , 2008 .
[22] Altino Loureiro,et al. Effect of overlapping friction stir welding passes in the quality of welds of aluminium alloys , 2008 .
[23] S. Guessasma,et al. Effect of process parameters on the physical characteristics of spot weld joints , 2007 .
[24] N. Kahraman. The influence of welding parameters on the joint strength of resistance spot-welded titanium sheets , 2007 .
[25] Ugur Ozsarac,et al. Effect of welding current on mechanical properties of galvanized chromided steel sheets in electrical resistance spot welding , 2007 .
[26] S. Aslanlar,et al. The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industry , 2006 .
[27] Tau Tyan,et al. Failure loads of spot welds under combined opening and shear static loading conditions , 2002 .