Fabrication, characterization and comparison of composite magnetic materials for high efficiency integrated voltage regulators with embedded magnetic core micro-inductors

High-efficiency integrated voltage regulators (IVRs) require the integration of power inductors, which have low loss and reduced size at very high frequency. The use of a magnetic material core can reduce significantly the inductor area and simultaneously increase the inductance. This paper focuses on the fabrication, characterization and modeling of nickel zinc (NiZn) ferrite and carbonyl iron powder (CIP)-epoxy magnetic composite materials, which are used as the magnetic core materials of embedded inductors in a printed wiring board (PWB) for a system in package (SIP) based buck type IVR. The fabricated composite materials and process are fully compatible with FR4 epoxy resin prepreg and laminate. For 85% weight loading of the magnetic powder (around 100 MHz at room temperature), the composite materials show a relative permeability of 7.5–8.1 for the NiZn ferrite composite and 5.2–5.6 for the CIP composite and a loss tangent value of 0.24–0.28 for the NiZn ferrite composite and 0.09–0.1 for the CIP-composite. The room temperature saturation flux density values are 0.1351 T and 0.5280 T for the NiZn ferrite and the CIP composites, respectively. The frequency dispersion parameters of the magnetic composites are modeled using a simplified Lorentz and Landau–Lifshitz–Gilbert equation for a Debye type relaxation. Embedded magnetic core solenoid inductors were designed based on the composite materials for the output filter of a high-efficiency SIP based buck type IVR. Evaluation of a SIP based buck type IVR with the designed inductors shows that it can reach peak efficiencies of 91.7% at 11 MHz for the NiZn ferrite-composite, 91.6% at 14 MHz for CIP-composite and 87.5% (NiZn ferrite-composite) and 87.3% (CIP-composite) efficiency at 100 MHz for a 1.7 V:1.05 V conversion. For a direct 5 V:1 V conversion using a stacked topology, a peak efficiency of 82% at 10 MHz and 72% efficiency at 100 MHz can be achieved for both materials.

[1]  Krishna Bharath,et al.  Power Delivery Design and Analysis of 14nm Multicore Server CPUs with Integrated Voltage Regulators , 2016, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC).

[2]  S. Bharathi,et al.  Design of High Efficiency Integrated Voltage Regulators with Embedded Magnetic Core Inductors , 2016, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC).

[3]  Fred C. Lee,et al.  High frequency integrated Point of Load (POL) module with PCB embedded inductor substrate , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[4]  Wei Sheng Chen,et al.  Effects of titanate coupling agent on the dielectric properties of NiZn ferrite powders-epoxy resin coatings , 2011 .

[5]  Fred C. Lee,et al.  Very High Frequency IVR for Small Portable Electronics With High-Current Multiphase 3-D Integrated Magnetics , 2017, IEEE Transactions on Power Electronics.

[6]  J. Drewniak,et al.  A mixing rule for predicting frequency dependence of material parameters in magnetic composites , 2012 .

[7]  Bruno Allard,et al.  A 100 MHz 91.5% Peak Efficiency Integrated Buck Converter With a Three-MOSFET Cascode Bridge , 2016, IEEE Transactions on Power Electronics.

[8]  Jeng-Shien Hsieh,et al.  Ultra-low-resistance 3D InFO inductors for integrated voltage regulator applications , 2016, 2016 IEEE International Electron Devices Meeting (IEDM).

[9]  Luca P. Carloni,et al.  A Switched-Inductor Integrated Voltage Regulator With Nonlinear Feedback and Network-on-Chip Load in 45 nm SOI , 2012, IEEE Journal of Solid-State Circuits.

[10]  Kaladhar Radhakrishnan,et al.  Package embedded inductors for integrated voltage regulators , 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC).

[11]  Shahriar Mirabbasi,et al.  Fully Integrated Buck Converter With Fourth-Order Low-Pass Filter , 2017, IEEE Transactions on Power Electronics.

[12]  James Tschanz,et al.  20.1 A digitally controlled fully integrated voltage regulator with on-die solenoid inductor with planar magnetic core in 14nm tri-gate CMOS , 2017, 2017 IEEE International Solid-State Circuits Conference (ISSCC).

[13]  S. Bharathi,et al.  Modeling and design of system-in-package integrated voltage regulator with thermal effects , 2016, 2016 IEEE 25th Conference on Electrical Performance Of Electronic Packaging And Systems (EPEPS).

[14]  K. Rozanov,et al.  The effect of shape distribution of inclusions on the frequency dependence of permeability in composites , 2009 .

[15]  Vivek De,et al.  A 500 MHz, 68% efficient, fully on-die digitally controlled buck Voltage Regulator on 22nm Tri-Gate CMOS , 2014, 2014 Symposium on VLSI Circuits Digest of Technical Papers.

[16]  K. Hatakeyama,et al.  Analysis of the permeability spectra of spinel ferrite composites using mixing rules , 2013, 2013 IEEE International Symposium on Electromagnetic Compatibility.

[17]  Xiaosen Liu,et al.  A Digitally Controlled Fully Integrated Voltage Regulator With On-Die Solenoid Inductor With Planar Magnetic Core in 14-nm Tri-Gate CMOS , 2018, IEEE Journal of Solid-State Circuits.

[18]  Fabrice Paillet,et al.  FIVR — Fully integrated voltage regulators on 4th generation Intel® Core™ SoCs , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[19]  Daniel Lu,et al.  Materials for Advanced Packaging , 2008 .

[20]  Luca P. Carloni,et al.  A 2.5D integrated voltage regulator using coupled-magnetic-core inductors on silicon interposer delivering 10.8A/mm2 , 2012, ISSCC.

[21]  Kaladhar Radhakrishnan,et al.  Package Inductors for Intel Fully Integrated Voltage Regulators , 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.