Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 1650 °C

[1]  Wang Lu,et al.  A novel gradient SiC-ZrB2-MoSi2 coating for SiC coated C/C composites by supersonic plasma spraying , 2017 .

[2]  Xiaohong Shi,et al.  Effect of spraying power on oxidation resistance and mechanical properties of plasma sprayed La-Mo-Si coating , 2017 .

[3]  F. Hou,et al.  Self-healing behavior in MoSi2/borosilicate glass composite , 2017 .

[4]  W. Shao,et al.  Deposition of a B-modified silicide coating for Nb-Si based alloy oxidation protection , 2016 .

[5]  Huiqin Wang,et al.  Adsorption of oxygen atom on MoSi2 (110) surface , 2016 .

[6]  F. Hou,et al.  MoSi2-borosilicate glass coating on fibrous ceramics prepared by in-situ reaction method for infrared radiation , 2016 .

[7]  Q. Fu,et al.  Influence of siliconizing on the oxidation behavior of plasma sprayed MoSi2 coating for niobium based alloy , 2016 .

[8]  C. Estournès,et al.  Thermal cycling and reactivity of a MoSi2/ZrO2 composite designed for self-healing thermal barrier coatings , 2016 .

[9]  Hejun Li,et al.  Effect of filler on the oxidation protective ability of MoSi2 coating for Mo substrate by halide activated pack cementation , 2016 .

[10]  Siyong Gu,et al.  Oxidation behavior of (Mo,W)Si2–Si3N4 composite coating on molybdenum substrate at 1600 °C , 2015 .

[11]  Long-fei Liu,et al.  Preparation of agglomerated powders for air plasma spraying MoSi2 coating , 2015 .

[12]  Xi-ping Guo,et al.  Co-deposition of Si and B to form oxidation-resistant coatings on an Nb–Ti–Si based ultrahigh temperature alloy by pack cementation technique , 2015 .

[13]  Yi Wang,et al.  Oxidation and interdiffusion behavior of Niobium substrate coated MoSi 2 coating prepared by spark plasma sintering , 2014 .

[14]  W. Lijie,et al.  Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process , 2014 .

[15]  Dezhi Wang,et al.  Preparation and characterization of MoSi2/MoB composite coating on Mo substrate , 2014 .

[16]  Dezhi Wang,et al.  Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying , 2013 .

[17]  A. K. Suri,et al.  Microstructure and mechanical properties of hot pressed Mo–Cr–Si–Ti in-situ composite, and oxidation behavior with silicide coatings , 2013 .

[18]  E. Ma,et al.  Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. , 2013, Nature materials.

[19]  A. Sharif.  Effects of Re- and Al-alloying on mechanical properties and high-temperature oxidation of MoSi2 , 2012 .

[20]  S. Majumdar.  Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy , 2012 .

[21]  M. Vilasi,et al.  The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400 °C , 2011 .

[22]  A. K. Suri,et al.  Development of silicide coating over molybdenum based refractory alloy and its characterization , 2010 .

[23]  J. Perepezko.  The Hotter the Engine, the Better , 2009, Science.

[24]  B. Venkataraman,et al.  MoSi2 coating on Mo substrate for short-term oxidation protection in air , 2009 .

[25]  R. Sakidja,et al.  Oxidation Resistant Coatings for Ultrahigh Temperature Refractory Mo‐Base Alloys , 2009 .

[26]  Binggang Zhang,et al.  Phase constitutions of MoSiN anti-oxidation multi-layer coatings on CC composites by fused slurry , 2009 .

[27]  Hongbo Zhang,et al.  Si–Mo–SiO2 oxidation protective coatings prepared by slurry painting for C/C–SiC composites , 2008 .

[28]  A. K. Suri,et al.  Preparation of TZM alloy by aluminothermic smelting and its characterization , 2005 .

[29]  D. Butt,et al.  Thermal Oxidation Kinetics of MoSi2‐Based Powders , 2004 .

[30]  N. Nomura,et al.  Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating , 2003 .

[31]  D. Dimiduk,et al.  Oxidation mechanisms in Mo-reinforced Mo5SiB2(T2)–Mo3Si alloys , 2002 .

[32]  B. Wielage,et al.  High temperature oxidation behavior of HVOF-sprayed unreinforced and reinforced molybdenum disilicide powders , 2001 .

[33]  Jingchuan Zhu,et al.  A Si-Mo fused slurry coating for oxidation protection of carbon-carbon composites , 2001 .

[34]  R. Suzuki,et al.  MoSi2 coating on molybdenum using molten salt , 2000 .

[35]  K. Hack,et al.  Calculated C–MoSi2 and B–Mo5Si3 pseudo-binary phase diagrams for the use in advanced materials processing , 2000 .

[36]  John R. Nicholls,et al.  Designing oxidation-resistant coatings , 2000 .

[37]  B. Pieraggi,et al.  Determination of Parabolic Rate Constants from a Local Analysis of Mass-Gain Curves , 1998 .

[38]  B. Mishra,et al.  Synthesis of molybdenum disilicide on molybdenum substrates , 1995 .

[39]  D. Wilder,et al.  High‐Temperature Oxidation of Molybdenum Disilicide , 1966 .