Closed-loop 4D-printed soft robots

[1]  Jheng-Wun Su,et al.  4D printing of polyurethane paint-based composites , 2019, International Journal of Smart and Nano Materials.

[2]  Guanyun Wang,et al.  Printed Paper Actuator: A Low-cost Reversible Actuation and Sensing Method for Shape Changing Interfaces , 2018, CHI.

[3]  Yuval Tassa,et al.  Continuous control with deep reinforcement learning , 2015, ICLR.

[4]  Wei-Hsin Liao,et al.  Triple shape memory polymers by 4D printing , 2018 .

[5]  Sridhar Kota,et al.  Design and Modeling of Generalized Fiber-Reinforced Pneumatic Soft Actuators , 2015, IEEE Transactions on Robotics.

[6]  Sampo Tuukkanen,et al.  Structural and Electrical Characterization of Solution-Processed Electrodes for Piezoelectric Polymer Film Sensors , 2016, IEEE Sensors Journal.

[7]  Jonathan Rossiter,et al.  3D-Printed Ready-To-Use Variable-Stiffness Structures , 2018, IEEE Robotics and Automation Letters.

[8]  Martin Wegener,et al.  Three-dimensional micro-printing of temperature sensors based on up-conversion luminescence , 2015 .

[9]  Abbas Z. Kouzani,et al.  Topology-Optimized 4D Printing of a Soft Actuator , 2019, Acta Mechanica Solida Sinica.

[10]  Rochdi Merzouki,et al.  Adaptive Neural Network Control of a Compact Bionic Handling Arm , 2015, IEEE/ASME Transactions on Mechatronics.

[11]  Jamie L. Branch,et al.  Robotic Tentacles with Three‐Dimensional Mobility Based on Flexible Elastomers , 2013, Advanced materials.

[12]  Hui Yang,et al.  3D Printing of Flexible Electronic Devices , 2018 .

[13]  Daniel M. Vogt,et al.  Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing , 2015, Advanced materials.

[14]  Martin L. Dunn,et al.  Controlled Sequential Shape Changing Components by 3D Printing of Shape Memory Polymer Multimaterials , 2015 .

[15]  Remco Sanders,et al.  Development of whisker inspired 3D multi-material printed flexible tactile sensors , 2017, 2017 IEEE SENSORS.

[16]  Mickaël Castro,et al.  3D printing of wood fibre biocomposites: From mechanical to actuation functionality , 2016 .

[17]  Xun Liu,et al.  Plant leaf-mimetic smart wind turbine blades by 4D printing , 2019, Renewable Energy.

[18]  Ming-Chuan Leu,et al.  A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing , 2017 .

[19]  David Espalin,et al.  Multi-functional 3D printed and embedded sensors for satellite qualification structures , 2015, 2015 IEEE SENSORS.

[20]  Abbas Z. Kouzani,et al.  Bending control of a 3D printed polyelectrolyte soft actuator with uncertain model , 2019 .

[21]  Samuel Gershman,et al.  Deep Successor Reinforcement Learning , 2016, ArXiv.

[22]  Alex Bewley,et al.  Learning to Drive from Simulation without Real World Labels , 2018, 2019 International Conference on Robotics and Automation (ICRA).

[23]  Sung-Jin Park,et al.  Instrumented cardiac microphysiological devices via multi-material 3D printing , 2016, Nature materials.

[24]  Fred W. Glover,et al.  Simulation optimization: a review, new developments, and applications , 2005, Proceedings of the Winter Simulation Conference, 2005..

[25]  GulJahan Zeb,et al.  Fully 3D Printed Multi-Material Soft Bio-Inspired Whisker Sensor for Underwater-Induced Vortex Detection. , 2018 .

[26]  K. Shea,et al.  An Autonomous Programmable Actuator and Shape Reconfigurable Structures Using Bistability and Shape Memory Polymers , 2017, 3D Printing and Additive Manufacturing.

[27]  Ian D. Walker,et al.  Task-space control of extensible continuum manipulators , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[28]  Namhun Kim,et al.  Multistable Thermal Actuators Via Multimaterial 4D Printing , 2018, Advanced Materials Technologies.

[29]  CianchettiMatteo,et al.  Soft Robotics Technologies to Address Shortcomings in Today's Minimally Invasive Surgery: The STIFF-FLOP Approach , 2014 .

[30]  D. Fitz-Gerald,et al.  Manufacturing and Characterization of Poly (Lactic Acid)/Carbon Black Conductive Composites for Fdm Feedstock: An Exploratory Study , 2016 .

[31]  Songlin Zhuang,et al.  A review of 3D-printed sensors , 2017 .

[32]  Tian Chen,et al.  A 3D, performance-driven generative design framework: automating the link from a 3D spatial grammar interpreter to structural finite element analysis and stochastic optimization , 2018, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

[33]  Jürgen Schmidhuber,et al.  Deep learning in neural networks: An overview , 2014, Neural Networks.

[34]  Wolfram Burgard,et al.  Deep reinforcement learning with successor features for navigation across similar environments , 2016, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[35]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[36]  Tian Chen,et al.  Harnessing bistability for directional propulsion of untethered, soft robots , 2017, ArXiv.

[37]  Cecilia Laschi,et al.  Model-Based Reinforcement Learning for Closed-Loop Dynamic Control of Soft Robotic Manipulators , 2019, IEEE Transactions on Robotics.

[38]  Trevor Darrell,et al.  Deep Domain Confusion: Maximizing for Domain Invariance , 2014, CVPR 2014.

[39]  Suiyang Khoo,et al.  Rigid elements dynamics modeling of a 3D printed soft actuator , 2018, Smart Materials and Structures.

[40]  Hidemitsu Furukawa,et al.  3D printing for gel robotics , 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[41]  R. B. Gopaluni,et al.  Deep reinforcement learning approaches for process control , 2017, 2017 6th International Symposium on Advanced Control of Industrial Processes (AdCONIP).

[42]  Hod Lipson,et al.  Soft material for soft actuators , 2017, Nature Communications.

[43]  Low-Cost 3D-Printed Wireless Soil Moisture Sensor , 2018, 2018 IEEE SENSORS.

[44]  Qingsong Xu,et al.  Design, Analysis and Testing of a New Compliant Compound Constant-Force Mechanism , 2018, Actuators.

[45]  Jan G. Korvink,et al.  Printing and preparation of integrated optical waveguides for optronic sensor networks , 2016 .

[46]  Sergey Levine,et al.  Guided Policy Search , 2013, ICML.

[47]  Wei Zhu,et al.  3D optical printing of piezoelectric nanoparticle-polymer composite materials. , 2014, ACS nano.

[48]  Shinichi Hirai,et al.  A Prestressed Soft Gripper: Design, Modeling, Fabrication, and Tests for Food Handling , 2017, IEEE Robotics and Automation Letters.

[49]  Quankang Wang,et al.  A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel , 2017 .

[50]  Michael Yu Wang,et al.  Design and Development of a Topology-Optimized Three-Dimensional Printed Soft Gripper. , 2018, Soft robotics.

[51]  Aaron D. Price,et al.  Toward a remarkable Li-S battery via 3D printing , 2019, Nano Energy.

[52]  Zeb Kurth-Nelson,et al.  Learning to reinforcement learn , 2016, CogSci.

[53]  Lucas R. Amaral,et al.  3D Printed e-Tongue , 2018, Front. Chem..

[54]  Mariangela Manti,et al.  Stiffening in Soft Robotics: A Review of the State of the Art , 2016, IEEE Robotics & Automation Magazine.

[55]  Alberto J. Palma,et al.  Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate , 2015 .

[56]  Hongliang Ren,et al.  Electromagnetically Enhanced Soft and Flexible Bend Sensor: A Quantitative Analysis With Different Cores , 2018, IEEE Sensors Journal.

[57]  Yonghua Chen,et al.  Principles and methods for stiffness modulation in soft robot design and development , 2018 .

[58]  Nabil Simaan,et al.  Hybrid motion/force control of multi-backbone continuum robots , 2016, Int. J. Robotics Res..

[59]  Jonathan Rossiter,et al.  3-dimensional fabrication of soft energy harvesters , 2013, Smart Structures.

[60]  Sohee John Yoon,et al.  Soft Inflatable Sensing Modules for Safe and Interactive Robots , 2018, IEEE Robotics and Automation Letters.

[61]  Suiyang Khoo,et al.  Development and analysis of a 3D printed hydrogel soft actuator , 2017 .

[62]  SaariMatt,et al.  Fabrication and Analysis of a Composite 3D Printed Capacitive Force Sensor , 2016 .

[63]  Jongsung Park,et al.  Biodegradable polymer material based smart stent: Wireless pressure sensor and 3D printed stent , 2019, Microelectronic Engineering.

[64]  Marc D. Killpack,et al.  A New Soft Robot Control Method: Using Model Predictive Control for a Pneumatically Actuated Humanoid , 2016, IEEE Robotics & Automation Magazine.

[65]  J A Bagnell,et al.  An Invitation to Imitation , 2015 .

[66]  María López-Valdeolivas,et al.  4D Printed Actuators with Soft-Robotic Functions. , 2018, Macromolecular rapid communications.

[67]  Carmel Majidi,et al.  Hydroprinted Electronics: Ultrathin Stretchable Ag-In-Ga E-Skin for Bioelectronics and Human-Machine Interaction. , 2018, ACS applied materials & interfaces.

[68]  Shannon E Bakarich,et al.  4D Printing with Mechanically Robust, Thermally Actuating Hydrogels. , 2015, Macromolecular rapid communications.

[69]  Sungho Jo,et al.  Use of Deep Learning for Characterization of Microfluidic Soft Sensors , 2018, IEEE Robotics and Automation Letters.

[70]  Jérémie Dequidt,et al.  Framework for online simulation of soft robots with optimization-based inverse model , 2016, 2016 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots (SIMPAR).

[71]  Kai Li,et al.  3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing , 2018, Nanotechnology.

[72]  Michael C. McAlpine,et al.  3D Printed Functional and Biological Materials on Moving Freeform Surfaces , 2018, Advanced materials.

[73]  E. Sardini,et al.  Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing , 2016 .

[74]  Loïc J Blum,et al.  Adding Biomolecular Recognition Capability to 3D Printed Objects. , 2016, Analytical chemistry.

[75]  Javier López-Martínez,et al.  Design and analysis of a flexible linkage for robot safe operation in collaborative scenarios , 2015 .

[76]  Alessio Tommasi,et al.  PLA conductive filament for 3D printed smart sensing applications , 2018 .

[77]  Yonghua Chen,et al.  Innovative Design of Embedded Pressure and Position Sensors for Soft Actuators , 2018, IEEE Robotics and Automation Letters.

[78]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[79]  Martin Pumera,et al.  3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis. , 2018, Analytical chemistry.

[80]  Russ Tedrake,et al.  Dynamics and trajectory optimization for a soft spatial fluidic elastomer manipulator , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[81]  Chun H. Wang,et al.  An Ultrasensitive 3D Printed Tactile Sensor for Soft Robotics , 2018, 1810.09236.

[82]  Remco Sanders,et al.  3D printed bio-inspired angular acceleration sensor , 2015, 2015 IEEE SENSORS.

[83]  Hiroshi Ishii,et al.  Cilllia: 3D Printed Micro-Pillar Structures for Surface Texture, Actuation and Sensing , 2016, CHI.

[84]  Bert-Jan F. van Beijnum,et al.  3D-printing soft sEMG sensing structures , 2017, 2017 IEEE SENSORS.

[85]  Shane Legg,et al.  Noisy Networks for Exploration , 2017, ICLR.

[86]  Nahal Aliheidari,et al.  3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites , 2017 .

[87]  YapHong Kai,et al.  High-Force Soft Printable Pneumatics for Soft Robotic Applications , 2016 .

[88]  George M. Whitesides,et al.  A soft, bistable valve for autonomous control of soft actuators , 2018, Science Robotics.

[89]  Razvan Pascanu,et al.  Sim-to-Real Robot Learning from Pixels with Progressive Nets , 2016, CoRL.

[90]  Shlomo Magdassi,et al.  3D Printing of a Thermo‐ and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities , 2019, Advanced Functional Materials.

[91]  Ole Sigmund,et al.  Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures , 2016, IEEE Transactions on Visualization and Computer Graphics.

[92]  Ryan B. Wicker,et al.  3D Printing for the Rapid Prototyping of Structural Electronics , 2014, IEEE Access.

[93]  Alexander J. Casson,et al.  3D Printed Dry EEG Electrodes , 2016, Sensors.

[94]  Saeid Nahavandi,et al.  Control-Oriented Modelling of a 3D-Printed Soft Actuator , 2018, Materials.

[95]  Michael S. Lew,et al.  Deep learning for visual understanding: A review , 2016, Neurocomputing.

[96]  Cosimo Della Santina,et al.  Dynamic control of soft robots interacting with the environment , 2018, 2018 IEEE International Conference on Soft Robotics (RoboSoft).

[97]  Wenguang Liu,et al.  Direct Printing of Stretchable Elastomers for Highly Sensitive Capillary Pressure Sensors , 2018, Sensors.

[98]  Benjamin Ang Wee Keong,et al.  A Novel Fold‐Based Design Approach toward Printable Soft Robotics Using Flexible 3D Printing Materials , 2018 .

[99]  Andreas Tünnermann,et al.  Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies , 2014 .

[100]  Wei Gao,et al.  Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems , 2016 .

[101]  Daniela Rus,et al.  Printable hydraulics: A method for fabricating robots by 3D co-printing solids and liquids , 2015, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[102]  Shlomo Magdassi,et al.  Fully 2D and 3D printed anisotropic mechanoluminescent objects and their application for energy harvesting in the dark , 2018 .

[103]  James A. Reggia,et al.  Towards Imitation Learning of Dynamic Manipulation Tasks: A Framework to Learn from Failures , 2014 .

[104]  Caterina Credi,et al.  3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers. , 2016, ACS applied materials & interfaces.

[105]  Sung-Hoon Ahn,et al.  Soft Tendril-Inspired Grippers: Shape Morphing of Programmable Polymer-Paper Bilayer Composites. , 2018, ACS applied materials & interfaces.

[106]  Kam K. Leang,et al.  Fused filament 3D printing of ionic polymer-metal composites for soft robotics , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[107]  Fariba Dehghani,et al.  Printed, Flexible pH Sensor Hydrogels for Wet Environments , 2018, Advanced Materials Technologies.

[108]  Guanyun Wang,et al.  Demonstrating Printed Paper Actuator: A Low-cost Reversible Actuation and Sensing Method for Shape Changing Interfaces , 2018, CHI Extended Abstracts.

[109]  Amin Noshadi,et al.  System identification and robust tracking of a 3D printed soft actuator , 2019, Smart Materials and Structures.

[110]  Michael Yu Wang,et al.  Topology optimized design, fabrication and evaluation of a multimaterial soft gripper , 2018, 2018 IEEE International Conference on Soft Robotics (RoboSoft).

[111]  Jan Peters,et al.  Reinforcement learning in robotics: A survey , 2013, Int. J. Robotics Res..

[112]  Annalisa Chiappone,et al.  Polymeric 3D Printed Functional Microcantilevers for Biosensing Applications. , 2017, ACS applied materials & interfaces.

[113]  Huichan Zhao,et al.  Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense , 2015 .

[114]  Ian D. Walker,et al.  Kinematics for multisection continuum robots , 2006, IEEE Transactions on Robotics.

[115]  Sarah S. Bedair,et al.  Creating 3D printed magnetic devices with ferrofluids and liquid metals , 2019, Additive Manufacturing.

[116]  Martin L. Dunn,et al.  Active origami by 4D printing , 2014 .

[117]  Jérémie Dequidt,et al.  Software toolkit for modeling, simulation, and control of soft robots , 2017, Adv. Robotics.

[118]  Liwei Lin,et al.  RF wireless lc tank sensors fabricated by 3D additive manufacturing , 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).

[119]  Ritu Raman,et al.  A modular approach to the design, fabrication, and characterization of muscle-powered biological machines , 2017, Nature Protocols.

[120]  Martin L. Dunn,et al.  Machine-learning based design of active composite structures for 4D printing , 2019, Smart Materials and Structures.

[121]  Zvonimir Sipus,et al.  Fiber-optic vibration sensor for high-power electric machines , 2015, 2015 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO).

[122]  Jérémie Dequidt,et al.  Real-time control of soft-robots using asynchronous finite element modeling , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[123]  Sawako Kaijima,et al.  Design and investigation of a multi-material compliant ratchet-like mechanism , 2018 .

[124]  Weihua Li,et al.  A Structural Optimisation Method for a Soft Pneumatic Actuator , 2018, Robotics.

[125]  Yang Yang,et al.  3D Printing of Flexible Liquid Sensor Based on Swelling Behavior of Hydrogel with Carbon Nanotubes , 2018, Advanced Materials Technologies.

[126]  Ming Liu,et al.  Virtual-to-real deep reinforcement learning: Continuous control of mobile robots for mapless navigation , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[127]  Chao Yuan,et al.  3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials , 2016, Scientific Reports.

[128]  Conor J. Walsh,et al.  A Highly Sensitive Capacitive‐Based Soft Pressure Sensor Based on a Conductive Fabric and a Microporous Dielectric Layer , 2018 .

[129]  Richard S. Trask,et al.  Responsive cellulose-hydrogel composite ink for 4D printing , 2018, Materials & Design.

[130]  K. C. Aw,et al.  Low velocity digital air flow sensor from 3D printed PEDOT:PSS micro-hair structures , 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).

[131]  A. Khosla,et al.  Soft, conductive nanocomposites based on ionic liquids/carbon nanotubes for 3D printing of flexible electronic devices , 2019, Polymer Journal.

[132]  Matteo Cianchetti,et al.  A bistable soft gripper with mechanically embedded sensing and actuation for fast closed-loop grasping , 2019, ArXiv.

[133]  Alberto Corigliano,et al.  The First 3-D-Printed z-Axis Accelerometers With Differential Capacitive Sensing , 2018, IEEE Sensors Journal.

[134]  Elisa Michelini,et al.  Smartphone-based multicolor bioluminescent 3D spheroid biosensors for monitoring inflammatory activity. , 2019, Biosensors & bioelectronics.

[135]  Jinho Bae,et al.  All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity , 2016 .

[136]  Ilya Kostrikov,et al.  Intrinsic Motivation and Automatic Curricula via Asymmetric Self-Play , 2017, ICLR.

[137]  Ying Liu,et al.  Self-supporting structure design in additive manufacturing through explicit topology optimization , 2017 .

[138]  J. R. Raney,et al.  Hybrid 3D Printing of Soft Electronics , 2017, Advanced materials.

[139]  Kaspar Althoefer,et al.  Kinematic Control of Continuum Manipulators Using a Fuzzy-Model-Based Approach , 2016, IEEE Transactions on Industrial Electronics.

[140]  Rigoberto C. Advincula,et al.  3D-printing and advanced manufacturing for electronics , 2019, Progress in Additive Manufacturing.

[141]  Ian D. Walker,et al.  Large deflection dynamics and control for planar continuum robots , 2001 .

[142]  Kurt Maute,et al.  Level Set Topology Optimization of Printed Active Composites , 2015 .

[143]  Ali Farhadi,et al.  AI2-THOR: An Interactive 3D Environment for Visual AI , 2017, ArXiv.

[144]  Wojciech Matusik,et al.  Topology optimization and 3D printing of multimaterial magnetic actuators and displays , 2019, Science Advances.

[145]  Oliver Sawodny,et al.  Model-based feedforward position control of constant curvature continuum robots using feedback linearization , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[146]  Grégoire Allaire,et al.  Structural optimization under overhang constraints imposed by additive manufacturing technologies , 2017, J. Comput. Phys..

[147]  Jun Ni,et al.  A review of 4D printing , 2017 .

[148]  MenonAditya,et al.  Optimization of Silicone 3D Printing with Hierarchical Machine Learning , 2019, 3D Printing and Additive Manufacturing.

[149]  Jae-Won Choi,et al.  Combined 3D printing technologies and material for fabrication of tactile sensors , 2015 .

[150]  Cecilia Laschi,et al.  Learning dynamic models for open loop predictive control of soft robotic manipulators. , 2017, Bioinspiration & biomimetics.

[151]  Christopher D. Rahn,et al.  Geometrically Exact Models for Soft Robotic Manipulators , 2008, IEEE Transactions on Robotics.

[152]  Christopher M Spadaccini,et al.  Photocurable Liquid Core–Fugitive Shell Printing of Optical Waveguides , 2011, Advanced materials.

[153]  Daniel M. Vogt,et al.  Soft Somatosensitive Actuators via Embedded 3D Printing , 2018, Advanced materials.

[154]  Benito Sanz-Izquierdo,et al.  3-D Printing of Elements in Frequency Selective Arrays , 2014, IEEE Transactions on Antennas and Propagation.

[155]  Ziyang Dai,et al.  3D Printed Microfluidic Device with Microporous Mn2O3-Modified Screen Printed Electrode for Real-Time Determination of Heavy Metal Ions. , 2016, ACS applied materials & interfaces.

[156]  R. Wicker,et al.  3D printed capacitive sensors , 2013, 2013 IEEE SENSORS.

[157]  Cecilia Laschi,et al.  Control Strategies for Soft Robotic Manipulators: A Survey. , 2018, Soft robotics.

[158]  Steven L. Brunton,et al.  Machine Learning Control – Taming Nonlinear Dynamics and Turbulence , 2016, Fluid Mechanics and Its Applications.

[159]  Pieter Abbeel,et al.  Reverse Curriculum Generation for Reinforcement Learning , 2017, CoRL.

[160]  Hongliang Ren,et al.  Single-Motor Controlled Tendon-Driven Peristaltic Soft Origami Robot , 2018, Journal of Mechanisms and Robotics.

[161]  ChoiJin,et al.  4D Printing Technology: A Review , 2015 .

[162]  O. Velev,et al.  3D‐Printed Silicone Soft Architectures with Programmed Magneto‐Capillary Reconfiguration , 2019, Advanced Materials Technologies.

[163]  M. Sitti,et al.  Soft Actuators for Small‐Scale Robotics , 2017, Advanced materials.

[164]  W. Kim,et al.  3D Printed Disposable Wireless Ion Sensors with Biocompatible Cellulose Composites , 2018, Advanced Electronic Materials.

[165]  Jikai Liu,et al.  Role of anisotropic properties on topology optimization of additive manufactured load bearing structures , 2017 .

[166]  Salvador Pané,et al.  4D printing and robotics , 2018, Science Robotics.

[167]  Yuval Tassa,et al.  Emergence of Locomotion Behaviours in Rich Environments , 2017, ArXiv.

[168]  Joey Dacula Mangadlao,et al.  3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties. , 2017, ACS applied materials & interfaces.

[169]  Hongliang Ren,et al.  Preliminary Design and Performance Test of Tendon-Driven Origami-Inspired Soft Peristaltic Robot , 2018, 2018 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[170]  Ian D. Walker,et al.  Empirical investigation of closed-loop control of extensible continuum manipulators , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[171]  Wei Sun,et al.  The Boom in 3D-Printed Sensor Technology , 2017, Sensors.

[172]  Roderick R. Kunz,et al.  Biomimetic Sniffing Improves the Detection Performance of a 3D Printed Nose of a Dog and a Commercial Trace Vapor Detector , 2016, Scientific Reports.

[173]  Cagdas D. Onal,et al.  A composite soft bending actuation module with integrated curvature sensing , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[174]  Lei Zhang,et al.  Stretchable Porous Carbon Nanotube‐Elastomer Hybrid Nanocomposite for Harvesting Mechanical Energy , 2017, Advanced materials.

[175]  Douglas Chai,et al.  Review of Deep Learning Methods in Robotic Grasp Detection , 2018, Multimodal Technol. Interact..

[176]  Z KouzaniAbbas,et al.  Polyelectrolyte Soft Actuators: 3D Printed Chitosan and Cast Gelatin , 2018 .

[177]  John Olaya,et al.  Analysis of 3 RPS Robotic Platform Motion in SimScape and MATLAB GUI Environment , 2017 .

[178]  Ian D. Walker,et al.  A model-based sliding mode controller for extensible continuum robots , 2010 .

[179]  Thomas J. Wallin,et al.  3D printing of soft robotic systems , 2018, Nature Reviews Materials.

[180]  Jing Li,et al.  Rapid prototyping eddy current sensors using 3D printing , 2017 .

[181]  Matteo Aureli,et al.  Fused filament 3D printing of ionic polymer-metal composites (IPMCs) , 2015 .

[182]  Sergey Levine,et al.  End-to-End Training of Deep Visuomotor Policies , 2015, J. Mach. Learn. Res..

[183]  Skylar Tibbits,et al.  4D Printing: Multi‐Material Shape Change , 2014 .

[184]  Sanlin S. Robinson,et al.  Highly stretchable electroluminescent skin for optical signaling and tactile sensing , 2016, Science.

[185]  B Mazzolai,et al.  An octopus-bioinspired solution to movement and manipulation for soft robots , 2011, Bioinspiration & biomimetics.

[186]  Balasubramanian Kandasubramanian,et al.  Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing , 2019, Chemical Engineering Journal.

[187]  Mats Jackson,et al.  Bending angle prediction and control of soft pneumatic actuators with embedded flex sensors: a data-driven approach , 2017 .

[188]  D. Espalin,et al.  Encapsulated Copper Wire and Copper Mesh Capacitive Sensing for 3-D Printing Applications , 2015, IEEE Sensors Journal.

[189]  Zhidong Xia,et al.  3D printing of carbon fiber-filled conductive silicon rubber , 2018 .

[190]  Zheng Wang,et al.  A Soft-Robotic Gripper With Enhanced Object Adaptation and Grasping Reliability , 2017, IEEE Robotics and Automation Letters.

[191]  Goran Stojanovic,et al.  An Ink-Jet Printed Eddy Current Position Sensor , 2013, Sensors.

[192]  Weihua Li,et al.  3D Printed Helical Soft Pneumatic Actuators , 2018, 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[193]  Matteo Bianchi,et al.  Controlling Soft Robots: Balancing Feedback and Feedforward Elements , 2017, IEEE Robotics & Automation Magazine.

[194]  Kurt Maute,et al.  Combined Level-Set-XFEM-Density Topology Optimization of Four-Dimensional Printed Structures Undergoing Large Deformation , 2019, Journal of Mechanical Design.

[195]  G. Krijnen,et al.  3D printed biomimetic whisker-based sensor with co-planar capacitive sensing , 2016, 2016 IEEE SENSORS.

[196]  Ernesto Suaste-Gómez,et al.  Developing an Ear Prosthesis Fabricated in Polyvinylidene Fluoride by a 3D Printer with Sensory Intrinsic Properties of Pressure and Temperature , 2016, Sensors.

[197]  Kyung Hyun Choi,et al.  3D printing for soft robotics – a review , 2018, Science and technology of advanced materials.

[198]  M. Dickey,et al.  “2D or not 2D”: Shape-programming polymer sheets , 2016 .

[199]  S. Feng,et al.  3D printed mould-based graphite/PDMS sensor for low-force applications , 2018, Sensors and Actuators A: Physical.

[200]  Paul P.L. Regtien,et al.  Sensors for Mechatronics , 2012 .

[201]  S. M. Hadi Sadati,et al.  Mechanics of Continuum Manipulators, a Comparative Study of Five Methods with Experiments , 2017, TAROS.

[202]  Mahdi Bodaghi,et al.  4D Printing Self-Morphing Structures , 2019, Materials.

[203]  Heinz Kück,et al.  D4.1 - Inkjet and Aerosol Jet® Printed Sensors on 2D and 3D Substrates , 2015 .

[204]  Suiyang Khoo,et al.  Evolution of 3D printed soft actuators , 2016 .

[205]  Sergey Levine,et al.  High-Dimensional Continuous Control Using Generalized Advantage Estimation , 2015, ICLR.

[206]  Sergey Levine,et al.  Continuous Deep Q-Learning with Model-based Acceleration , 2016, ICML.

[207]  Ningbin Zhang,et al.  Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing , 2019, Advanced Functional Materials.

[208]  Tom Schaul,et al.  Reinforcement Learning with Unsupervised Auxiliary Tasks , 2016, ICLR.

[209]  J. Grzybowski,et al.  Miniature Transducer of Linear Displacement Based on Miniature Hall Effect Sensors , 2015 .

[210]  Stephen A. Morin,et al.  Soft Robotics: Review of Fluid‐Driven Intrinsically Soft Devices; Manufacturing, Sensing, Control, and Applications in Human‐Robot Interaction   , 2017 .

[211]  Yiming Liang,et al.  Fabrication and modeling of dielectric elastomer soft actuator with 3D printed thermoplastic frame , 2019, Sensors and Actuators A: Physical.

[212]  Abbas Z. Kouzani,et al.  3D printed hydrogel soft actuators , 2016, 2016 IEEE Region 10 Conference (TENCON).

[213]  Arne Rost,et al.  The SLS-Generated Soft Robotic Hand - An Integrated Approach Using Additive Manufacturing and Reinforcement Learning , 2013, 2013 12th International Conference on Machine Learning and Applications.

[214]  Ivan Poupyrev,et al.  Printed optics: 3D printing of embedded optical elements for interactive devices , 2012, UIST.

[215]  Mark Platt,et al.  3D printed microfluidic device with integrated optical sensing for particle analysis , 2018 .

[216]  Suiyang Khoo,et al.  Pattern-driven 4D printing , 2018 .

[217]  Danila Moscone,et al.  A reagent-free paper-based sensor embedded in a 3D printing device for cholinesterase activity measurement in serum , 2018 .

[218]  David Wingate,et al.  Learning nonlinear dynamic models of soft robots for model predictive control with neural networks , 2018, 2018 IEEE International Conference on Soft Robotics (RoboSoft).

[219]  Qi Ge,et al.  Miniature Pneumatic Actuators for Soft Robots by High‐Resolution Multimaterial 3D Printing , 2019, Advanced Materials Technologies.

[220]  Gerhard Neumann,et al.  Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators , 2018, Front. Robot. AI.

[221]  Johannes P. Schlöder,et al.  Benchmarking model-free and model-based optimal control , 2017, Robotics Auton. Syst..

[222]  Cedric P. Ambulo,et al.  Molecularly‐Engineered, 4D‐Printed Liquid Crystal Elastomer Actuators , 2018, Advanced Functional Materials.

[223]  G. Whitesides,et al.  Paper-Based Electrical Respiration Sensor. , 2016, Angewandte Chemie.

[224]  Kwang J. Kim,et al.  Searching for a new ionomer for 3D printable ionic polymer–metal composites: Aquivion as a candidate , 2017 .

[225]  Cecilia Laschi,et al.  Soft robot perception using embedded soft sensors and recurrent neural networks , 2019, Science Robotics.

[226]  Hongliang Ren,et al.  Deep Reinforcement Learning for Soft, Flexible Robots: Brief Review with Impending Challenges , 2019, Robotics.

[227]  Yuval Tassa,et al.  Data-efficient Deep Reinforcement Learning for Dexterous Manipulation , 2017, ArXiv.

[228]  Michael C. McAlpine,et al.  3D Printed Stretchable Tactile Sensors , 2017, Advanced materials.

[229]  Tzu-Liang Bill Tseng,et al.  4-D Printing of Pressure Sensors and Energy Harvesting Devices for Engineering Education , 2018 .

[230]  Derek C. Rose,et al.  Deep Machine Learning - A New Frontier in Artificial Intelligence Research [Research Frontier] , 2010, IEEE Computational Intelligence Magazine.

[231]  C. P. Purssell,et al.  Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors , 2014 .

[232]  Liangbing Hu,et al.  3D‐Printing Electrolytes for Solid‐State Batteries , 2018, Advanced materials.

[233]  Michael Yu Wang,et al.  Topology Optimized Multimaterial Soft Fingers for Applications on Grippers, Rehabilitation, and Artificial Hands , 2019, IEEE/ASME Transactions on Mechatronics.

[234]  K. J. Kim,et al.  IPMC Embedded in a Pneumatic Soft Robotic Actuator: Preliminary Experiments in Actuation and SensingBehaviors , 2018, 2018 15th International Conference on Ubiquitous Robots (UR).

[235]  James O Hardin,et al.  All-printed multilayer high voltage capacitors with integrated processing feedback , 2019, Additive Manufacturing.

[236]  Mariangela Manti,et al.  Stable Open Loop Control of Soft Robotic Manipulators , 2018, IEEE Robotics and Automation Letters.

[237]  Characterization of 3D printed piezoelectric sensors: Determiniation of d33 piezoelectric coefficient for 3D printed polyvinylidene fluoride sensors , 2016, 2016 IEEE SENSORS.

[238]  Charlie C. L. Wang,et al.  Current and future trends in topology optimization for additive manufacturing , 2018 .

[239]  James F Rusling,et al.  Developing Microfluidic Sensing Devices Using 3D Printing. , 2018, ACS sensors.

[240]  Aldin Malkoc,et al.  The Development of a Glucose Dehydrogenase 3D-Printed Glucose Sensor: A Proof-of-Concept Study , 2018, Journal of diabetes science and technology.

[241]  LuNanshu,et al.  Flexible and Stretchable Electronics Paving the Way for Soft Robotics , 2014 .

[242]  HeYong,et al.  Three-Dimensional Coprinting of Liquid Metals for Directly Fabricating Stretchable Electronics , 2018 .

[243]  Jinwoo Jung,et al.  An evaluation of closed-loop control options for continuum manipulators , 2012, 2012 IEEE International Conference on Robotics and Automation.

[244]  Gijsbertus J.M. Krijnen,et al.  Embedded sensing: Integrating sensors in 3-D printed structures , 2018 .

[245]  Jeonghyun Kim,et al.  A skin-attachable, stretchable integrated system based on liquid GaInSn for wireless human motion monitoring with multi-site sensing capabilities , 2017 .

[246]  Thomas J. Wallin,et al.  Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing , 2019, Journal of Materials Chemistry A.

[247]  D L Bader,et al.  Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications. , 2015, Medical engineering & physics.