Thermomechanical stress analysis and measurement in quasi-monolithic integration technology (QMIT)

This paper is dedicated to thermomechanical stress measurement and analysis with a new technology for microwave and millimeter-wave applications called quasi-monolithic integration technology (QMIT). A measurement-based method and a three-dimensional (3-D) finite-element simulator are applied to achieve the thermomechanical stress distribution under different temperatures for the different structures fabricated by QMIT. A closed-loop temperature measurement system consisting of a Pt-100 temperature sensor, a Peltier element, and a digitally controlled current source enables temperature measurements with a resolution of better than 0.1/spl deg/C. The surface profiles on the silicon substrate around the active devices have been measured using scanning probe microscopy (SPM), surface profiling (DEKTAK) (Veeco Instruments Inc., New York), or white-light interferometry [Tarraf et al. (2004)]. The measured results show very good agreement with the results of theoretical model calculations. The simulation results reveal a much lower induced thermomechanical stress for the enhanced QMIT structure than the earlier concept of QMIT, which results in a better lifetime and reliability for this technology.

[1]  Pradeep Lall,et al.  Influence of Temperature on Microelectronics and System Reliability : A Physics of Failure Approach , 2020 .

[2]  C. J. Wilson,et al.  Fracture testing of bulk silicon microcantilever beams subjected to a side load , 1996 .

[3]  Hartmut Hillmer,et al.  An enhanced quasi-monolithic integration technology for microwave and millimeter wave applications , 2003 .

[4]  David Michael Rowe,et al.  Thermal conduction in semiconductors , 1988 .

[5]  Jan Söderkvist,et al.  Gallium arsenide as a mechanical material , 1994 .

[6]  E. Wasige,et al.  12 GHz coplanar quasi-monolithic oscillator , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[7]  Hartmut Hillmer,et al.  Optimization of thermal resistance in quasi monolithic integration technology (QMIT) structure , 2001, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.01CH37189).

[8]  G. Kompa,et al.  Heat transfer and thermal stress analysis in the new generation quasi-monolithic integration technology (QMIT) , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).

[9]  B. Stark.  MEMS Reliability Assurance Guidelines for Space Applications , 1999 .

[10]  Konstantinos I. Papathomas,et al.  Encapsulant for fatigue life enhancement of controlled-collapse chip connection (C4) , 1993 .

[11]  J. Schweitz,et al.  Micromechanical fracture strength of silicon , 1990 .

[12]  G. Kompa,et al.  Simulation and measurement of thermal stress in quasi-monolithic integration technology (QMIT) , 2001, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220).

[13]  G. Kompa,et al.  GaAs FET characterization in a quasi-monolithic Si environment , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[14]  H. Hillmer,et al.  Stress investigation of PECVD dielectric layers for advanced optical MEMS , 2004 .