Non-uniform residual stresses for parallel assembly of out-of-plane surface-micromachined structures

This note describes a method for the parallel self-assembly of out-of-plane surface-micromachined structures that uses non-uniform residual stresses, inherent in many surface-micromachining processes. The residual stresses are used to achieve a one-time only actuation capable of lifting and assembling raised structures. Theory is provided to calculate the deflection and stiffness of bi-layer cantilevers. Devices for amplifying the vertical deflection are demonstrated and used to assemble large arrays of devices.

[1]  Residual strain and resultant postrelease deflection of surface micromachined structures , 2000 .

[2]  W. Cleghorn,et al.  Microassembly of 3-D microstructures using a compliant, passive microgripper , 2004, Journal of Microelectromechanical Systems.

[3]  Shigeki Nashima,et al.  Optical actuation of micromirrors fabricated by the micro-origami technique , 2003 .

[4]  W. Fang,et al.  Determining mean and gradient residual stresses in thin films using micromachined cantilevers , 1996 .

[5]  R. Plunkett,et al.  Formulas for Stress and Strain , 1965 .

[6]  Robert W. Johnstone,et al.  Curl and Effective Height of Micromachined Bi-Layer Cantilevers Under Differing Residual Stresses , 2006, 2006 Canadian Conference on Electrical and Computer Engineering.

[7]  Victor M. Bright,et al.  Applications for surface-micromachined polysilicon thermal actuators and arrays , 1997 .

[8]  George M. Whitesides,et al.  Surface tension-powered self-assembly of microstructures - the state-of-the-art , 2003 .

[9]  Lih Y. Lin,et al.  Free-space micromachined optical switches with submillisecond switching time for large-scale optical crossconnects , 1998, IEEE Photonics Technology Letters.

[10]  T. Aida,et al.  Self-Assembly of Microstage Using Micro-Origami Technique on GaAs , 2002 .

[11]  Jose E. Schutt-Aine,et al.  Plastic deformation magnetic assembly (PDMA) of out-of-plane microstructures: Technology and application , 2001 .

[12]  Staffan Greek,et al.  Deflection of surface-micromachined devices due to internal, homogeneous or gradient stresses , 1999 .

[13]  Victor M. Bright,et al.  Solder self-assembly for three-dimensional microelectromechanical systems , 1999 .

[14]  Thermokinetic actuation for batch assembly of microscale hinged structures , 2003 .

[15]  D. Uttamchandani,et al.  Integrated self-assembling and holding technique applied to a 3-D MEMS variable optical attenuator , 2004, Journal of Microelectromechanical Systems.

[16]  Y. W. Yi,et al.  Magnetic actuation of hinged microstructures , 1999 .

[17]  K. Tsui,et al.  Micromachined end-effector and techniques for directed MEMS assembly , 2004 .

[18]  R. Muller,et al.  Surface-micromachined mirrors for laser-beam positioning , 1996 .

[19]  S. Senturia,et al.  M-TEST: A test chip for MEMS material property measurement using electrostatically actuated test structures , 1997 .

[20]  David A. Koester,et al.  Modeling of stress-induced curvature in surface-micromachined devices , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[21]  I. Shimoyama,et al.  Multistep sequential batch assembly of three-dimensional ferromagnetic microstructures with elastic hinges , 2005, Journal of Microelectromechanical Systems.

[22]  E. Yeatman,et al.  Self-assembly of three-dimensional microstructures using rotation by surface tension forces , 1993 .

[23]  E. Yeatman,et al.  Demonstration of three-dimensional microstructure self-assembly , 1995 .

[24]  Victor M. Bright,et al.  Automated assembly of flip-up micromirrors , 1998 .

[25]  R. Syms.  Surface tension powered self-assembly of 3-D micro-optomechanical structures , 1999 .