A Compact McKibben Muscle Based Bending Actuator for Close-to-Body Application in Assistive Wearable Robots

In this letter we demonstrate a pneumatic bending actuator for upper-limb assistive wearable robots which uses thin McKibben muscles in combination with a flexure strip. The actuator features both active soft actuation and passive gravity support, and in terms of force transmission bridges the gap between the classic rigid type actuators and the emerging soft actuator technologies. Its flexure strip leverages the high-force low-displacement properties of McKibben muscles towards a large rotational range of motion and reduces localized forces at the attachments. We explain the synthesis method by which these actuators can be obtained and optimized for high specific moment output. Physical specimens of three optimized actuator designs are built and tested on a dedicated experimental setup, verifying the computational models. Furthermore, a proof-of-concept upper-limb assistive wearable robot is presented to illustrate a practical application of this actuator and its potential for close-to-body alignment. We found that based on our currently available components actuators can be built which, given a width of 80 mm, are able to produce a moment exceeding 4 Nm at an arm elevation of 90 deg.

[1]  Gen Endo,et al.  Braiding Thin McKibben Muscles to Enhance Their Contracting Abilities , 2018, IEEE Robotics and Automation Letters.

[2]  Just L. Herder,et al.  A review of assistive devices for arm balancing , 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR).

[3]  Dirk Lefeber,et al.  Pneumatic artificial muscles: Actuators for robotics and automation , 2002 .

[4]  Gen Endo,et al.  Design of thin McKibben muscle and multifilament structure , 2017 .

[5]  Shuichi Wakimoto,et al.  Fabrication of Thin McKibben Artificial Muscles with Various Design Parameters and Their Experimental Evaluations , 2013 .

[6]  A R Tilley,et al.  THE MEASURE OF MAN AND WOMAN , 1993 .

[7]  Ashitava Ghosal,et al.  A Survey on Static Modeling of Miniaturized Pneumatic Artificial Muscles With New Model and Experimental Results , 2018 .

[8]  Toshiro Noritsugu,et al.  Pneumatic Soft Actuator for Human Assist Technology , 2005 .

[9]  Yuki Funabora,et al.  Flexible Fabric Actuator Realizing 3D Movements Like Human Body Surface for Wearable Devices , 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[10]  George K. I. Mann,et al.  Developments in hardware systems of active upper-limb exoskeleton robots: A review , 2016, Robotics Auton. Syst..

[11]  Gen Endo,et al.  Experimental Evaluation of Textile Mechanisms Made of Artificial Muscles , 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft).

[12]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[13]  S. Leonhardt,et al.  A survey on robotic devices for upper limb rehabilitation , 2014, Journal of NeuroEngineering and Rehabilitation.

[14]  L. Mouton,et al.  Shoulder and elbow range of motion for the performance of activities of daily living: A systematic review , 2018, Physiotherapy theory and practice.

[15]  Bertrand Tondu,et al.  Modelling of the McKibben artificial muscle: A review , 2012 .

[16]  Taichi Shiiba,et al.  Realization of all motion for the upper limb by a muscle suit , 2004, RO-MAN 2004. 13th IEEE International Workshop on Robot and Human Interactive Communication (IEEE Catalog No.04TH8759).

[17]  Dominiek Reynaerts,et al.  Fabrication and control of miniature McKibben actuators , 2011 .

[18]  Norman M. Wereley,et al.  Experimental Characterization and Static Modeling of McKibben Actuators , 2009 .

[19]  Rita M Patterson,et al.  Soft robotic devices for hand rehabilitation and assistance: a narrative review , 2018, Journal of NeuroEngineering and Rehabilitation.

[20]  Gen Endo,et al.  Fabrication of “18 Weave” Muscles and Their Application to Soft Power Support Suit for Upper Limbs Using Thin McKibben Muscle , 2019, IEEE Robotics and Automation Letters.

[21]  Améziane Aoussat,et al.  A Universalist strategy for the design of Assistive Technology , 2012 .

[22]  Garth R Johnson,et al.  A study of the external forces and moments at the shoulder and elbow while performing every day tasks. , 2004, Clinical biomechanics.

[23]  Loek A Van der Heide,et al.  An overview and categorization of dynamic arm supports for people with decreased arm function , 2014, Prosthetics and orthotics international.

[24]  Jan B. Jonker,et al.  SPACAR — Computer Program for Dynamic Analysis of Flexible Spatial Mechanisms and Manipulators , 1990 .

[25]  Andrew McDaid,et al.  Design and fabrication of a fiber-reinforced pneumatic bending actuator , 2016, 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

[26]  Koichi Suzumori,et al.  Static analysis of powered low-back orthosis driven by thin pneumatic artificial muscles considering body surface deformation , 2015, 2015 IEEE/SICE International Symposium on System Integration (SII).

[27]  Jindong Liu,et al.  Wearable Robotics for Upper-Limb Rehabilitation and Assistance , 2018 .

[28]  Gen Endo,et al.  Muscle textile to implement soft suit to shift balancing posture of the body , 2018, 2018 IEEE International Conference on Soft Robotics (RoboSoft).

[29]  Allan Joshua Veale,et al.  Towards compliant and wearable robotic orthoses: A review of current and emerging actuator technologies. , 2016, Medical engineering & physics.

[30]  P. Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996 .

[31]  Soumya K Manna,et al.  Comparative study of actuation systems for portable upper limb exoskeletons. , 2018, Medical engineering & physics.