Stress corrosion cracking of TP304L heat exchanger tube used for low pressure steam generation in a hydrogen unit of petroleum refinery

[1]  C. Subramanian.  Dissimilar metal weld failure of steam piping in a hydrogen unit of petroleum refinery , 2021, Engineering Failure Analysis.

[2]  A. Bouzid,et al.  FAILURES AND LEAK INSPECTION TECHNIQUES OF TUBE-TO-TUBESHEET JOINTS: A REVIEW , 2021, Engineering Failure Analysis.

[3]  C. Subramanian.  Leakage of gasoil from side cut piping in crude distillation unit of a petroleum refinery: An industrial case study , 2021 .

[4]  Y. Gong,et al.  Failure analysis on abnormal leakage of TP321 stainless steel pipe of medium temperature shifting gas in hydrogen production system , 2021, Engineering Failure Analysis.

[5]  Y. Gong,et al.  Failure analysis on abnormal leakage between tubes and tubesheet of spiral-wound heat exchanger for nuclear power plant , 2020 .

[6]  C. Subramanian.  Corrosion prevention of crude and vacuum distillation column overheads in a petroleum refinery: A field monitoring study , 2020 .

[7]  C. Subramanian.  Deterioration of economizer tube in utility boiler , 2020 .

[8]  L. Alhems,et al.  Review of common failures in heat exchangers – Part I: Mechanical and elevated temperature failures , 2020 .

[9]  Y. Gong,et al.  Failure analysis on unexpected perforation of heat exchanger tube in methacrylic acid reboiler of specialty chemical plant , 2020 .

[10]  C. Subramanian.  Reducing the Risk of High Temperature Creep Failures in Refinery Service Component and Equipment , 2019, Journal of Pressure Vessel Technology.

[11]  M. Aliofkhazraei,et al.  A comprehensive review on internal corrosion and cracking of oil and gas pipelines , 2019, Journal of Natural Gas Science and Engineering.

[12]  K. Ravindranath,et al.  Failure of stainless steel 304L air cooler tubes due to stress corrosion cracking caused by organic chlorides , 2019, Engineering Failure Analysis.

[13]  Yi Gong,et al.  Failure analysis on leaked titanium tubes of seawater heat exchangers in recirculating cooling water system of coastal nuclear power plant , 2019, Engineering Failure Analysis.

[14]  C. Subramanian.  Localized pitting corrosion of API 5L grade A pipe used in industrial fire water piping applications , 2018, Engineering Failure Analysis.

[15]  A. Abd,et al.  Performance analysis of shell and tube heat exchanger: Parametric study , 2018, Case Studies in Thermal Engineering.

[16]  M. Ananda Rao,et al.  Stress corrosion cracking failure of a SS 316L high pressure heater tube , 2018, Engineering Failure Analysis.

[17]  Weimin Guo,et al.  Failure analysis of tube-to-tubesheet welded joints in a shell-tube heat exchanger , 2016 .

[18]  P. Schempp,et al.  About the Correlation Between Crude Oil Corrosiveness and Results From Corrosion Monitoring in an Oil Refinery , 2016 .

[19]  S. Tavares,et al.  Failure analysis of AISI 321 tubes of heat exchanger , 2015 .

[20]  Weiqiang Wang,et al.  Failure analysis of stress corrosion cracking in heat exchanger tubes during start-up operation , 2015 .

[21]  Zhen‐Guo Yang,et al.  Failure analysis on unexpected wall thinning of heat-exchange tubes in ammonia evaporators , 2015 .

[22]  M. Ersöz,et al.  Theoretical and experimental thermodynamic analyses of a chevron type heat exchanger , 2015 .

[23]  R. Parrott.  Potential hazards from undetected corrosion in complex equipment: A case study of the destructive separation of an offshore heat exchanger , 2014 .

[24]  M. Davoodi,et al.  Preventing corrosion and tube failure in sulfur condenser during normal operation, startup, and shutdown of the south pars gas processing plant (case study) , 2014 .

[25]  Qi Zhou,et al.  Risk analysis of corrosion failures of equipment in refining and petrochemical plants based on fuzzy set theory , 2013 .

[26]  Y. Gong,et al.  Acidic/caustic alternating corrosion on carbon steel pipes in heat exchanger of ethylene plant , 2011 .

[27]  R. Clegg,et al.  Ammonium nitrate induced cracking of a dryer , 2011 .

[28]  Athanasios Vazdirvanidis,et al.  Failure analysis of a hard-drawn water tube leakage caused by the synergistic actions of pitting corrosion and stress–corrosion cracking , 2011 .

[29]  Khalil Ranjbar,et al.  Effect of flow induced corrosion and erosion on failure of a tubular heat exchanger , 2010 .

[30]  Marwan Hassan,et al.  A Probabilistic Assessment Technique Applied to a Cracked Heat Exchanger Tube Subjected to Flow-Induced Vibration , 2009 .

[31]  A. P. Tschiptschin,et al.  Cracking of 2.25Cr–1.0Mo steel tube/stationary tube-sheet weldment of a heat-exchanger , 2008 .

[32]  V. Kain,et al.  Failure of carbon steel tubes in a fluidized bed combustor , 2008 .

[33]  C.R.F. Azevedo,et al.  Failure analysis of a crude oil pipeline , 2007 .

[34]  Zhiwen Wang,et al.  Failure of 304 stainless bellows expansion joint , 2005 .

[35]  C. Azevedo,et al.  Failure analysis of a heat-exchanger serpentine , 2005 .

[36]  Jorge Andrey Wilhelms Gut,et al.  Thermal model validation of plate heat exchangers with generalized configurations , 2004 .

[37]  A. Bazergui,et al.  Estimation of residual stresses in hydraulically expanded tube-to-tubesheet joints , 1998 .

[38]  S. Yokell,et al.  Expanded, and Welded-and-Expanded Tube-to-Tubesheet Joints , 1992 .