Identification of actuator model in an electrical machine by prediction error method and cultural particle swarm optimization

This paper discusses identification of an actuator model, which has been built inside a two-pole induction motor in order to control rotor vibrations. The methods used for identification are prediction error method and cultural particle swarm optimization with mutation. The first-mentioned method produces a black box model with correspondence to input-output measurements. The second method is used to identify parameters of a linear time-invariant state-space model, which is based on electromechanical equations. The results are compared in time domain and in frequency domain.

[1]  Kari Tammi,et al.  Modelling of flexural rotor vibration and time-periodic system dynamics in a two-pole cage induction machine equipped with a self-bearing force actuator , 2010, PSYCO.

[2]  K. Tammi,et al.  Attenuation of Harmonic Rotor Vibration in a Cage Rotor Induction Machine by a Self-Bearing Force Actuator , 2009, IEEE Transactions on Magnetics.

[3]  Tao Zhang Adaptive Vibration Compensation Control Research on Rotor in Active Magnetic Bearing System , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[4]  Ying Wu,et al.  A cultural particle swarm optimization algorithm , 2010, 2010 Sixth International Conference on Natural Computation.

[5]  Antero Arkkio,et al.  A model-based flexural rotor vibration control in cage induction electrical machines by a built-in force actuator , 2008 .

[6]  Kari Tammi,et al.  Active control of radial rotor vibrations : identification, feedback, feedforward, and repetitive control methods , 2007 .

[7]  G. Genta Vibration of structures and machines , 1993 .

[8]  Yohji Okada,et al.  Vibration control of flexible rotor by inclination control magnetic bearings with axial self-bearing motor , 2001 .

[9]  Kai Zenger,et al.  Active control of rotor vibrations by advanced control methods , 2009 .

[10]  Sergio Bittanti,et al.  Active control of vibrations in helicopters via pole assignment techniques , 1994, IEEE Trans. Control. Syst. Technol..

[11]  Giancarlo Genta,et al.  Vibration of Structures and Machines: Practical Aspects , 1992 .

[12]  K. Tammi,et al.  A model-based flexural rotor vibration control in cage induction electrical machines by a built-in force actuator , 2008 .

[13]  Ying Wu,et al.  Optimal Control in Reducing Rotor Vibrations , 2011 .

[14]  Tohru Katayama,et al.  Subspace Methods for System Identification , 2005 .