Fluid‐structure interaction including volumetric coupling with homogenised subdomains for modeling respiratory mechanics

In this article, a novel approach is presented for combining standard fluid-structure interaction with additional volumetric constraints to model fluid flow into and from homogenised solid domains. The proposed algorithm is particularly interesting for investigations in the field of respiratory mechanics as it enables the mutual coupling of airflow in the conducting part and local tissue deformation in the respiratory part of the lung by means of a volume constraint. In combination with a classical monolithic fluid-structure interaction approach, a comprehensive model of the human lung can be established that will be useful to gain new insights into respiratory mechanics in health and disease. To illustrate the validity and versatility of the novel approach, three numerical examples including a patient-specific lung model are presented. The proposed algorithm proves its capability of computing clinically relevant airflow distribution and tissue strain data at a level of detail that is not yet achievable, neither with current imaging techniques nor with existing computational models. Copyright © 2016 John Wiley & Sons, Ltd.

[1]  M. Kleiber,et al.  Modelling and numerical analysis of stresses and strains in the human lung including tissue-gas interaction , 1994 .

[2]  Jason H. T. Bates,et al.  Airway-parenchymal interdependence in the lung slice , 2013, Respiratory Physiology & Neurobiology.

[3]  H. Oertel.  Prandtl's essentials of fluid mechanics , 2004 .

[4]  Matthias Heil,et al.  Finite-Reynolds-number effects in steady, three-dimensional airway reopening. , 2006, Journal of biomechanical engineering.

[5]  Céline Grandmont,et al.  Homogenization of a multiscale viscoelastic model with nonlocal damping, application to the human lungs , 2015 .

[6]  T. Hughes,et al.  Two classes of mixed finite element methods , 1988 .

[7]  W A Wall,et al.  Numerical identification method for the non-linear viscoelastic compressible behavior of soft tissue using uniaxial tensile tests and image registration - application to rat lung parenchyma. , 2014, Journal of the mechanical behavior of biomedical materials.

[8]  Wolfgang A Wall,et al.  Structured Tree Impedance Outflow Boundary Conditions for 3D Lung Simulations , 2010, Journal of biomechanical engineering.

[9]  K. Lutchen,et al.  Relationship between heterogeneous changes in airway morphometry and lung resistance and elastance. , 1997, Journal of applied physiology.

[10]  Bernard Sapoval,et al.  Smaller is better—but not too small: A physical scale for the design of the mammalian pulmonary acinus , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[11]  T A Wilson,et al.  A computational model for expiratory flow. , 1982, Journal of applied physiology: respiratory, environmental and exercise physiology.

[12]  A Adler,et al.  Airway-parenchymal interdependence after airway contraction in rat lung explants. , 1998, Journal of applied physiology.

[13]  Wolfgang A. Wall,et al.  A nested dynamic multi-scale approach for 3D problems accounting for micro-scale multi-physics , 2010 .

[14]  F. Laurent,et al.  Assessment of bronchial wall thickness and lumen diameter in human adults using multi‐detector computed tomography: comparison with theoretical models , 2007, Journal of anatomy.

[15]  A. D. Gosman,et al.  Two calculation procedures for steady, three-dimensional flows with recirculation , 1973 .

[16]  M. Heil,et al.  Airway closure: occluding liquid bridges in strongly buckled elastic tubes. , 1999, Journal of biomechanical engineering.

[17]  J. Grotberg,et al.  BIOFLUID MECHANICS IN FLEXIBLE TUBES , 2001 .

[18]  Timon Rabczuk,et al.  TOWARDS STRESSES AND STRAINS IN THE RESPIRATORY SYSTEM , 2008 .

[19]  Eduard E de Lange,et al.  MRI of the lungs using hyperpolarized noble gases , 2002, Magnetic resonance in medicine.

[20]  Timon Rabczuk,et al.  Fluid–structure interaction in lower airways of CT‐based lung geometries , 2008 .

[21]  M Ismail,et al.  Coupled and reduced dimensional modeling of respiratory mechanics during spontaneous breathing , 2013, International journal for numerical methods in biomedical engineering.

[22]  T. Hughes,et al.  A new finite element formulation for computational fluid dynamics: V. Circumventing the Babuscka-Brezzi condition: A stable Petrov-Galerkin formulation of , 1986 .

[23]  William L. Ko,et al.  Application of Finite Elastic Theory to the Deformation of Rubbery Materials , 1962 .

[24]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[25]  Louis A Gatto,et al.  Impact of mechanical ventilation on the pathophysiology of progressive acute lung injury. , 2015, Journal of applied physiology.

[26]  Wolfgang A. Wall,et al.  Coupling strategies for biomedical fluid–structure interaction problems , 2010 .

[27]  Nicolas Meunier,et al.  OUTLET DISSIPATIVE CONDITIONS FOR AIR FLOW IN THE BRONCHIAL TREE , 2005 .

[28]  Jiwoong Choi,et al.  Simulation of pulmonary air flow with a subject-specific boundary condition. , 2010, Journal of biomechanics.

[29]  Jintai Chung,et al.  A Time Integration Algorithm for Structural Dynamics With Improved Numerical Dissipation: The Generalized-α Method , 1993 .

[30]  M J Tobin,et al.  Advances in mechanical ventilation. , 2001, The New England journal of medicine.

[31]  W A Wall,et al.  Material model of lung parenchyma based on living precision-cut lung slice testing. , 2011, Journal of the mechanical behavior of biomedical materials.

[32]  Lena Wiechert.  Computational Modeling of Multi-Field and Multi-Scale Phenomena in Respiratory Mechanics , 2011 .

[33]  Donald P. Gaver,et al.  Biomechanics of liquid–epithelium interactions in pulmonary airways , 2008, Respiratory Physiology & Neurobiology.

[34]  Anders Logg,et al.  Multiscale modeling of the acoustic properties of lung parenchyma , 2008 .

[35]  Ekkehard Ramm,et al.  On the geometric conservation law in transient flow calculations on deforming domains , 2006 .

[36]  Mark A. Lewis,et al.  The Mechanics of Lung Tissue under High-Frequency Ventilation , 2001, SIAM J. Appl. Math..

[37]  Wolfgang A. Wall,et al.  Towards a comprehensive computational model for the respiratory system , 2010 .

[38]  Wolfgang A. Wall,et al.  A monolithic computational approach to thermo‐structure interaction , 2013 .

[39]  T. Hughes,et al.  Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations , 1990 .

[40]  Jason H. T. Bates,et al.  The interface between measurement and modeling of peripheral lung mechanics , 2005, Respiratory Physiology & Neurobiology.