Experimental Realization of Thermal Stability Enhancement of Nickel Germanide Alloy by Using TiN Metal Capping

In this paper, we demonstrated the enhancement of thermal stability of nickel germanide (NiGe) alloy up to 600 °C by using titanium nitride (TiN) metal capping. A high <inline-formula> <tex-math notation="LaTeX">${I}_{ \mathrm{\scriptscriptstyle ON}}/{I}_{ \mathrm{\scriptscriptstyle OFF}}$ </tex-math></inline-formula> ratio of <inline-formula> <tex-math notation="LaTeX">$2.9 \times 10^{5}$ </tex-math></inline-formula> was achieved by capping TiN metal on Ni for NiGe alloy formation at 600 °C. Detailed analyses were performed for realizing the mechanism for TiN capping on NiGe/Ge, including vertical element diffusion profile observation through depth-profiling X-ray photoelectron spectroscopy (XPS), element diffusion distribution by energy-dispersive X-ray spectroscopy mapping, and direct junction leakage current path detection by conductive atomic force microscopy. The experimental results indicated that TiN capping can reduce the risk of agglomeration and form a graded NiGe/Ge Schottky junction that is beneficial for suppressing the degradation of junction leakage. Subsequently, we compared the electrical performance of TiN/NiGe/n-Ge at various N/Ti ratios of TiNs. Based on the depth-profiling XPS results and electrical performance, TiN with an N/Ti ratio of approximately 1:1 can resist the Ni and Ge diffusion, which facilitates the suppression of the agglomeration process. However, the TiN capping layers with an N/Ti ratio of less than approximately 1:1 (Ti-rich) were not favorable for resisting Ni and Ge diffusion.

[1]  W. M. Robertson.  Grain‐Boundary Grooving by Surface Diffusion for Finite Surface Slopes , 1971 .

[2]  J. Poate,et al.  Formation of Ultrathin Single-Crystal Silicide Films on Si: Surface and Interfacial Stabilization of Si-NiSi 2 Epitaxial Structures , 1983 .

[3]  Carlton M. Osburn,et al.  Optimization of the germanium preamorphization conditions for shallow-junction formation , 1988 .

[4]  Varga,et al.  Lattice mismatch dislocations in a preferentially sputtered alloy studied by scanning tunneling microscopy. , 1992, Physical review letters.

[5]  C. Hayzelden,et al.  Silicide formation and silicide‐mediated crystallization of nickel‐implanted amorphous silicon thin films , 1993 .

[6]  David J. Srolovitz,et al.  The Thermodynamics and Kinetics of film agglomeration , 1995 .

[7]  J. Woo,et al.  Salicidation process using NiSi and its device application , 1997 .

[8]  Huajian Gao,et al.  Crack-like grain-boundary diffusion wedges in thin metal films , 1999 .

[9]  Hiroshi Iwai,et al.  NiSi salicide technology for scaled CMOS , 2002 .

[10]  C. O. Chui,et al.  Activation and diffusion studies of ion-implanted p and n dopants in germanium , 2003 .

[11]  D. Chi,et al.  Formation and Morphology Evolution of Nickel Germanides on Ge (100) under Rapid Thermal Annealing , 2004 .

[12]  Qingchun Zhang,et al.  Formation and Thermal Stability of Nickel Germanide on Germanium Substrate , 2005 .

[13]  Xiaohui Liu,et al.  Studies of Ti- and Ni-germanide Schottky contacts on n-Ge(100) substrates , 2005 .

[14]  Ching-Chich Leu,et al.  Study of thermal stability of nickel monogermanide on single- and polycrystalline germanium substrates , 2005 .

[15]  Krishna C. Saraswat,et al.  Germanium n-type shallow junction activation dependences , 2005 .

[16]  A. Chin,et al.  Germanium pMOSFETs with Schottky-barrier germanide S/D, high-/spl kappa/ gate dielectric and metal gate , 2005, IEEE Electron Device Letters.

[17]  H. Hwang,et al.  Sub-15 nm n+/p-germanium shallow junction formed by PH3 plasma doping and excimer laser annealing , 2006 .

[18]  Shiyang Zhu,et al.  Enhanced thermal stability of nickel germanide on thin epitaxial germanium by adding an ultrathin titanium layer , 2007 .

[19]  D. Chi,et al.  Grain-boundary grooving and agglomeration of alloy thin films with a slow-diffusing species. , 2006, Physical review letters.

[20]  Tomonori Nishimura,et al.  Evidence for strong Fermi-level pinning due to metal-induced gap states at metal/germanium interface , 2007 .

[21]  Wei Huang,et al.  Thermal Stability of Nickel Germanide Formed on Tensile-Strained Ge Epilayer on Si Substrate , 2010, IEEE Electron Device Letters.

[22]  Kang L. Wang,et al.  Formation and Device Application of Ge Nanowire Heterostructures via Rapid Thermal Annealing , 2011 .

[23]  R. Wallace,et al.  Low temperature fabrication and characterization of nickel germanide Schottky source/drain contacts for implant-less germanium p-channel metal-oxide-semiconductor field-effect transistors , 2012 .

[24]  M. Myronov,et al.  Ohmic contacts to n-type germanium with low specific contact resistivity , 2012 .

[25]  Jun Li,et al.  Texture Evolution and Grain Competition in NiGe Film on Ge(001) , 2013 .

[26]  Chen Wang,et al.  Germanium n+/p Shallow Junction With Record Rectification Ratio Formed by Low-Temperature Preannealing and Excimer Laser Annealing , 2014, IEEE Transactions on Electron Devices.

[27]  L. Witters,et al.  Strained germanium quantum well p-FinFETs fabricated on 45nm Fin pitch using replacement channel, replacement metal gate and germanide-free local interconnect , 2015, 2015 Symposium on VLSI Technology (VLSI Technology).

[28]  Y. Yeo,et al.  Germanium n-Channel Planar FET and FinFET: Gate-Stack and Contact Optimization , 2015, IEEE Transactions on Electron Devices.

[29]  Yu-Hsien Lin,et al.  Enhancing Thermal Stability of Nickel-Germanide Alloy up to 600 °C By Using Metal Passivation , 2016 .

[30]  Yao-Jen Lee,et al.  Experimental Realization of a Ternary-Phase Alloy Through Microwave-Activated Annealing for Ge Schottky pMOSFETs , 2016, IEEE Transactions on Electron Devices.