Passively Q-switched mid-infrared fluoride fiber laser around 3 µm using a tungsten disulfide (WS2) saturable absorber

In this letter, we demonstrate a passively Q-switched Ho3+/Pr3+ co-doped fluoride fiber laser centered at 2865.7 nm using a tungsten disulfide (WS2) saturable absorber (SA) for the first time, to the best of our knowledge. A multilayer WS2 film was fabricated using the sulfidation grown method and then transferred onto an Au mirror to act as the cavity feedback and SA device in a linear cavity. Under a launched pump power of 318.5 mW, stable Q-switched pulses with an average output power of 48.4 mW were achieved with a pulse duration of 1.73 µs and repetition rate of 131.6 kHz, resulting in a pulse energy of 0.37 µJ. Our experimental results confirm that WS2 can be an effective nonlinear modulator that is suitable for pulse generation at the 3 µm waveband.

[1]  Junsu Lee,et al.  Femtosecond harmonic mode-locking of a fiber laser at 3.27 GHz using a bulk-like, MoSe2-based saturable absorber. , 2016, Optics express.

[2]  Meng Liu,et al.  Graphene-deposited microfiber photonic device for ultrahigh-repetition rate pulse generation in a fiber laser. , 2015, Optics express.

[3]  Heping Li,et al.  3-μm Mid-infrared pulse generation using topological insulator as the saturable absorber. , 2015, Optics letters.

[4]  Shuangchun Wen,et al.  Ultra-short pulse generation by a topological insulator based saturable absorber , 2012 .

[5]  D. Hudson,et al.  Actively Q-switched 2.9 μm Ho(3+)Pr(3+)-doped fluoride fiber laser. , 2012, Optics letters.

[6]  Shuangchun Wen,et al.  Microwave and optical saturable absorption in graphene. , 2012, Optics express.

[7]  Jianlin Zhao,et al.  WS₂ saturable absorber for dissipative soliton mode locking at 1.06 and 1.55 µm. , 2015, Optics express.

[8]  J R Taylor,et al.  Tunable Q-switched fiber laser based on saturable edge-state absorption in few-layer molybdenum disulfide (MoS₂). , 2014, Optics express.

[9]  N. Peyghambarian,et al.  Graphene Mode-Locked Fiber Laser at 2.8 $\mu \text{m}$ , 2016, IEEE Photonics Technology Letters.

[10]  Shuangchun Wen,et al.  Mid-infrared mode-locked pulse generation with multilayer black phosphorus as saturable absorber. , 2016, Optics letters.

[11]  L. Chu,et al.  Evolution of electronic structure in atomically thin sheets of WS2 and WSe2. , 2012, ACS nano.

[12]  Zhengqian Luo,et al.  1-, 1.5-, and 2-μm Fiber Lasers Q-Switched by a Broadband Few-Layer MoS2 Saturable Absorber , 2014, Journal of Lightwave Technology.

[13]  R. Norwood,et al.  Passively continuous-wave mode-locked Er(3+)-doped ZBLAN fiber laser at 2.8 μm. , 2012, Optics letters.

[14]  Shuangchun Wen,et al.  Mechanically exfoliated black phosphorus as a new saturable absorber for both Q-switching and Mode-locking laser operation. , 2015, Optics express.

[15]  D. Hudson,et al.  High-power diode-pumped fiber laser operating at 3 μm. , 2011, Optics letters.

[16]  S. Jackson.  Towards high-power mid-infrared emission from a fibre laser , 2012, Nature Photonics.

[17]  Junsu Lee,et al.  Mode-locked, 1.94-μm, all-fiberized laser using WS₂ based evanescent field interaction. , 2015, Optics express.

[18]  Stuart D. Jackson,et al.  High peak power actively Q-switched Ho3 +, Pr3 +-co-doped fluoride fibre laser , 2013 .

[19]  Yong Liu,et al.  Efficient 2.87 μm fiber laser passively switched using a semiconductor saturable absorber mirror. , 2012, Optics letters.

[20]  S. Iijima,et al.  Identification of active atomic defects in a monolayered tungsten disulphide nanoribbon. , 2011, Nature communications.

[21]  S. Wen,et al.  Black phosphorus as saturable absorber for the Q-switched Er:ZBLAN fiber laser at 2.8 μm. , 2015, Optics express.

[22]  Robert A Norwood,et al.  Graphene Q-switched 2.78 μm Er3+-doped fluoride fiber laser. , 2013, Optics letters.

[23]  Chun Li,et al.  Large-area synthesis of monolayer WS₂ and its ambient-sensitive photo-detecting performance. , 2015, Nanoscale.

[24]  M. Terrones,et al.  Photosensor Device Based on Few‐Layered WS2 Films , 2013 .

[25]  Robert A Norwood,et al.  Numerical investigation on high power mid-infrared supercontinuum fiber lasers pumped at 3 µm. , 2013, Optics express.

[26]  Hao Wang,et al.  Q-switched fiber laser based on transition metal dichalcogenides MoS(2), MoSe(2), WS(2), and WSe(2). , 2015, Optics express.

[27]  J. Coleman,et al.  Ultrafast saturable absorption of two-dimensional MoS2 nanosheets. , 2013, ACS nano.

[28]  Réal Vallée,et al.  30  W fluoride glass all-fiber laser at 2.94  μm. , 2015, Optics letters.

[29]  Michel Piché,et al.  Femtosecond fiber lasers reach the mid-infrared , 2015 .

[30]  Andreas Klein,et al.  Electronic band structure of single-crystal and single-layer WS 2 : Influence of interlayer van der Waals interactions , 2001 .

[31]  Shengzhi Zhao,et al.  Watt-level passively Q-switched Er:Lu₂O₃ laser at 2.84 μm using MoS₂. , 2016, Optics letters.

[32]  J. Coleman,et al.  Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials , 2011, Science.

[33]  Shuangchen Ruan,et al.  Microfiber-based WS 2 -film saturable absorber for ultra-fast photonics , 2015 .

[34]  N. Peyghambarian,et al.  Passively Q-Switched 2.8-$\mu{\rm m}$ Nanosecond Fiber Laser , 2012, IEEE Photonics Technology Letters.

[35]  Zheng Zheng,et al.  Yb- and Er-doped fiber laser Q-switched with an optically uniform, broadband WS2 saturable absorber , 2015, Scientific Reports.

[36]  R I Woodward,et al.  Wideband saturable absorption in few-layer molybdenum diselenide (MoSe₂) for Q-switching Yb-, Er- and Tm-doped fiber lasers. , 2015, Optics express.

[37]  Shigeki Tokita,et al.  12 W Q-switched Er:ZBLAN fiber laser at 2.8 μm. , 2011, Optics letters.

[38]  Junsu Lee,et al.  Harmonically mode-locked femtosecond fiber laser using non-uniform, WS2-particle deposited side-polished fiber , 2016 .

[39]  Heping Li,et al.  Ultrafast erbium-doped fiber laser mode-locked by a CVD-grown molybdenum disulfide (MoS2) saturable absorber. , 2014, Optics express.

[40]  Qing Hua Wang,et al.  Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. , 2012, Nature nanotechnology.

[41]  S. Wen,et al.  Molybdenum disulfide (MoS₂) as a broadband saturable absorber for ultra-fast photonics. , 2014, Optics express.

[42]  Liangmo Mei,et al.  Broadband Few‐Layer MoS2 Saturable Absorbers , 2014, Advanced materials.

[43]  Irina T. Sorokina,et al.  Mid-infrared coherent sources and applications , 2008 .