On the thermal performance of wire-screen meshes as heat exchanger material

Due to large number of design parameters, numerical analysis is inevitable for heat exchanger design with wire-screen structures. This paper establishes a direct simulation method to study the laminar flow and heat transfer at the pore level. The experiment validation proves this analysis is reliable. For both the pressure drop and heat transfer characteristics, various configurations of wire-screen meshes are investigated, where water has been used as coolant. Material properties difference such as conductivity and heat capacity ratios of the two phases are evaluated. Structure porosity is also quantified and it is found that there exists an optimised porosity for the thermal performance. The properties of water at 20 °C are used for the fluid phase.

[1]  K. Vafai,et al.  Analysis of Variants Within the Porous Media Transport Models , 2000 .

[2]  Kambiz Vafai,et al.  Transient analysis of incompressible flow through a packed bed , 1998 .

[3]  P. Richards,et al.  Wind loads on porous structures , 1999 .

[4]  S. C. Solanki,et al.  Heat transfer and friction factor correlations for packed bed solar air heater for a low porosity system , 2003 .

[5]  S. Ergun Fluid flow through packed columns , 1952 .

[6]  M. Hawley,et al.  Wall Effect in Packed Columns , 1969 .

[7]  Jun Xu,et al.  In-plane effective thermal conductivity of plain-weave screen laminates , 2002 .

[8]  Guadalupe Lopez Lopez,et al.  Comparison of performance of heat regenerators : Relation between heat transfer efficiency and pressure drop , 2001 .

[9]  Won Soon Chang,et al.  Porosity and Effective Thermal Conductivity of Wire Screens , 1990 .

[10]  P. Cheng,et al.  Effective stagnant thermal conductivity of wire screens , 1996 .

[11]  Hugh W. Coleman,et al.  Experimentation and Uncertainty Analysis for Engineers , 1989 .

[12]  An experimental study on thermal transport in lightweight metal foams at high Reynolds numbers , 2002 .

[13]  H. Hodson,et al.  MODELLING ON THERMAL TRANSPORT IN CELLULAR METAL FOAMS , 2002 .

[14]  H. Hodson,et al.  Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material , 2004 .

[15]  José Ricardo Sodré,et al.  Friction Factor Determination for Flow Through Finite Wire-Mesh Woven-Screen Matrices , 1997 .

[16]  Jun Xu,et al.  Thermal/fluid characteristics of 3-D woven mesh structures as heat exchanger surfaces , 2003 .

[17]  Andrey V. Kuznetsov,et al.  A perturbation solution for heating a rectangular sensible heat storage packed bed with a constant temperature at the walls , 1997 .

[18]  K. Muralidhar,et al.  Analysis of flow and heat transfer in a regenerator mesh using a non-Darcy thermally non-equilibrium model , 2001 .

[19]  K. Vafai,et al.  Forced Convection in a Channel Filled With a Porous Medium: An Exact Solution , 1989 .

[20]  H. K. Varma,et al.  Effect of geometrical and thermophysical characteristics of bed materials on the enhancement of thermal performance of packed bed solar air heaters , 1995 .

[21]  J. S. Saini,et al.  Optimization of bed parameters for packed bed solar energy collection system , 2004 .

[22]  J. Armour,et al.  Fluid flow through woven screens , 1968 .

[23]  C. Tien,et al.  Effects of thermal dispersion on forced convection in fibrous media , 1988 .

[24]  R. Viskanta,et al.  EXPERIMENTAL STUDIES ON A SOLAR AIR COLLECTOR WITH METAL MATRIX ABSORBER , 1999 .

[25]  Adrian Bejan,et al.  Cooling of stacks of plates shielded by porous screens , 1995 .

[26]  Uri Bin-Nun,et al.  Low cost and high performance screen laminate regenerator matrix , 2004 .

[27]  Kambiz Vafai,et al.  Convective flow and heat transfer in variable-porosity media , 1984, Journal of Fluid Mechanics.

[28]  Howard P. Hodson,et al.  Convective heat dissipation with lattice-frame materials , 2004 .

[30]  R. Shah,et al.  Handbook of single-phase convective heat transfer , 1987 .

[31]  Douglas T. Queheillalt,et al.  The effects of topology upon fluid-flow and heat-transfer within cellular copper structures , 2004 .