FracturePerformanceof aLarge-StoneAsphaltMixtureBasedona Monotonic Tensile Overlay Test
暂无分享,去创建一个
[1] M. Sadeghnejad,et al. Fracture resistance of asphalt mixtures under mixed-mode I/II loading at low-temperature: Without and with nano SiO2 , 2021 .
[2] Changfa Ai,et al. Influence of aggregate interference on the crack propagation of asphalt concrete by the configurational force fracture criterion , 2020 .
[3] H. Bui,et al. Effects of specimen size and loading conditions on the fracture behaviour of asphalt concretes in the SCB test , 2020 .
[4] Xue Xin,et al. Rheological properties, microstructure and aging resistance of asphalt modified with CNTs/PE composites , 2020 .
[5] M. Aliha,et al. Specimen type effect on measured low‐temperature fracture toughness of asphalt concrete , 2020 .
[6] Hongren Gong,et al. Analysis of cohesive and adhesive damage initiations of asphalt pavement using a microstructure-based finite element model , 2020 .
[7] S. Pirmohammad,et al. Experimental investigation of fracture properties of asphalt mixtures modified with Nano Fe2O3 and carbon nanotubes , 2020, Road Materials and Pavement Design.
[8] Yong Ding,et al. Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method , 2020 .
[9] N. Nguyen,et al. Evaluation of Fracture and Fatigue Cracking Characterization Ability of Nonstandardized Semicircular-Bending Test for Asphalt Concrete , 2020 .
[10] M. Aliha,et al. An extended edge-notched disc bend (ENDB) specimen for mixed-mode I+II fracture assessments , 2020, International Journal of Solids and Structures.
[11] Hongren Gong,et al. Effect of temperature field on damage initiation in asphalt pavement: A microstructure-based multiscale finite element method , 2020 .
[12] M. Oeser,et al. Study on interfacial debonding between bitumen and aggregate based on micromechanical damage model , 2020, International Journal of Pavement Engineering.
[13] Zhengxiong Chen,et al. Experimental Evaluation of the Influence of Aggregate Strength on the Flexural Cracking Behavior of Epoxy Asphalt Mixtures , 2020, Materials.
[14] K. Vasconcelos,et al. Case Study of a Composite Layer with Large-Stone Asphalt Mixture for Heavy-Traffic Highways , 2020 .
[15] M. Aliha,et al. Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens , 2020, Fatigue & Fracture of Engineering Materials & Structures.
[16] P. Hao,et al. Optimization design and verification of Large Stone Porous asphalt Mixes gradation using Compressible Packing Model , 2020 .
[17] S. Pirmohammad,et al. Mixed Mode I/II Fracture Strength of Modified HMA Concretes Subjected to Different Temperature Conditions , 2019, Journal of Testing and Evaluation.
[18] Félix Pérez-Jiménez,et al. Evaluating the Role of Aggregate Gradation on Cracking Performance of Asphalt Concrete for Thin Overlays , 2019, Applied Sciences.
[19] Jian Wang,et al. Fracture simulation of asphalt concrete with randomly generated aggregate microstructure , 2018 .
[20] F. Ni,et al. Effects of Loading Rate and Temperature on Cracking Resistance Characteristics of Asphalt Mixtures Using Nonnotched Semicircular Bending Tests , 2018, Journal of Testing and Evaluation.
[21] Sireesh Saride,et al. Evaluation of cracking resistance potential of geosynthetic reinforced asphalt overlays using direct tensile strength test , 2018 .
[22] V. M. Garcia,et al. Assessing Crack Susceptibility of Asphalt Concrete Mixtures with Overlay Tester , 2018 .
[23] Omer Tatari,et al. An optimum selection strategy of reflective cracking mitigation methods for an asphalt concrete overlay over flexible pavements , 2018 .
[24] Xiaoming Huang,et al. Effects of aggregate size and specimen scale on asphalt mixture cracking using a micromechanical simulation approach , 2017, Journal of Wuhan University of Technology-Mater. Sci. Ed..
[25] Sireesh Saride,et al. Influence of geosynthetic-interlayers on the performance of asphalt overlays on pre-cracked pavements , 2017 .
[26] Lu Sun,et al. Characterizing air void effect on fracture of asphalt concrete at low-temperature using discrete element method , 2017 .
[27] I. Al-Qadi,et al. Investigation of viscoelastic fracture fields in asphalt mixtures using digital image correlation , 2017, International Journal of Fracture.
[28] Hadi Saeidi,et al. Investigating the effects of aging and loading rate on low-temperature cracking resistance of core-based asphalt samples using semi-circular bending test , 2016 .
[29] S. Pirmohammad,et al. Asphalt concrete resistance against fracture at low temperatures under different modes of loading , 2015 .
[30] D. Castro-Fresno,et al. Evaluation of reflective cracking in pavements using a new procedure that combine loads with different frequencies , 2015 .
[31] Victor M. Garcia,et al. Understanding Sources of Variability of Overlay Test Procedure , 2015 .
[32] Yongli Zhao,et al. Design method and performance for large stone porous asphalt mixtures , 2010 .
[33] R. Christopher Williams,et al. Factors Study in Low-Temperature Fracture Resistance of Asphalt Concrete , 2010 .
[34] Kai He,et al. Research on Crack Detection Algorithm of the Concrete Bridge Based on Image Processing , 2019, Procedia Computer Science.
[35] M. Aliha,et al. Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents , 2017 .
[36] Chandrakant S. Desai,et al. Constitutive modeling of materials and contacts using the disturbed state concept , 2015 .
[37] Chandrakant S. Desai,et al. Constitutive modeling of materials and contacts using the disturbed state concept: Part 1 – Background and analysis , 2015 .
[38] Xin Jun Feng,et al. A new laboratory method to characterize gradation segregation of large stone asphalt mixtures , 2013 .