Thickness dependence of cracking resistance in thin aluminium plates

[1]  J. Knott,et al.  Fundamentals of Fracture Mechanics , 2008 .

[2]  Robert H. Dodds,et al.  Ductile tearing in part-through cracks: experiments and cell-model predictions , 1998 .

[3]  Wolfgang Brocks,et al.  Quantification of constraint effects in elastic-plastic crack front fields , 1998 .

[4]  Yuh J. Chao,et al.  J-A2 Characterization of Crack-Tip Fields: Extent of J-A2 Dominance and Size Requirements , 1998 .

[5]  F. Delannay,et al.  Statistical procedure for improving the precision of the measurement of the essential work of fracture of thin sheets , 1997, International Journal of Fracture.

[6]  A. Atkins,et al.  A review of the J and I integrals and their implications for crack growth resistance and toughness in ductile fracture , 1996 .

[7]  F. Delannay,et al.  Critical assessment of the application of the J-integral and CTOD concepts to circumferentially cracked copper bars , 1996 .

[8]  Viggo Tvergaard,et al.  Effect of strain-dependent cohesive zone model on predictions of crack growth resistance , 1996 .

[9]  Viggo Tvergaard,et al.  Three dimensional analysis of dynamic ductile crack growth in a thin plate , 1996 .

[10]  H. Mcqueen,et al.  Hot deformation mechanisms in a 10 vol% Al2O3 particle reinforced 6061 al matrix composite , 1995 .

[11]  J. Newman,et al.  Three-Dimensional CTOA and Constraint Effects During Stable Tearing in a Thin-Sheet Material , 1995 .

[12]  J. Williams,et al.  Determination of the fracture toughness of polymeric films by the essential work method , 1994 .

[13]  Albert S. Kobayashi,et al.  Plane stress stable crack growth and J-integral/HRR field , 1993 .

[14]  Y. Chao.  On a single parameter controlled fracture of solids under plane stress conditions , 1993 .

[15]  J. Hutchinson,et al.  The influence of plasticity on mixed mode interface toughness , 1993 .

[16]  Yuh J. Chao,et al.  Higher order asymptotic crack tip fields in a power-law hardening material , 1993 .

[17]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[18]  C. Shih,et al.  Family of crack-tip fields characterized by a triaxiality parameter—II. Fracture applications , 1992 .

[19]  Yonggang Huang,et al.  Accurate Dilatation Rates for Spherical Voids in Triaxial Stress Fields , 1991 .

[20]  Y. Mai,et al.  Essential work of fracture and j‐integral measurements for ductile polymers , 1991 .

[21]  S. El-Soudani.  Quantitative fractography and fracture mechanics characterization , 1990 .

[22]  R. McMeeking,et al.  Large crack tip opening in thin elastic-plastic sheets , 1990, International Journal of Fracture.

[23]  P. Thomason,et al.  Ductile Fracture of Metals , 1990 .

[24]  T. Anderson.  Crack tip parameters for large scale yielding and low constraint configurations , 1989 .

[25]  W. Schmitt,et al.  The influence of triaxiality on stable crack growth , 1989 .

[26]  D. Read,et al.  Essential work of fracture (we) versus energy dissipation rate (Jc) in plane stress ductile fracture , 1986 .

[27]  Brian Moran,et al.  Energy release rate along a three-dimensional crack front in a thermally stressed body , 1986, International Journal of Fracture.

[28]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[29]  B. Cotterell,et al.  Effects of pre-strain on plane stress ductile fracture in α-brass , 1980 .

[30]  B. Cotterell,et al.  The essential work of plane stress ductile fracture , 1977, International Journal of Fracture.

[31]  Stanley T. Rolfe,et al.  Fracture and Fatigue Control in Structures: Applications of Fracture Mechanics , 1976 .

[32]  K. B. Broberg,et al.  On stable crack growth , 1975 .

[33]  Alfred M. Freudenthal,et al.  Fatigue and fracture mechanics , 1973 .

[34]  K. B. Broberg,et al.  CRACK-GROWTH CRITERIA-AND NON-LINEAR FRACTURE MECHANICS , 1971 .

[35]  M. F. Kanninen,et al.  Inelastic Behavior of Solids , 1970, Science.

[36]  D. M. Tracey,et al.  On the ductile enlargement of voids in triaxial stress fields , 1969 .

[37]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[38]  F. A. McClintock,et al.  A Criterion for Ductile Fracture by the Growth of Holes , 1968 .

[39]  Jonas Faleskog,et al.  Micromechanics of coalescence—I. Synergistic effects of elasticity, plastic yielding and multi-size-scale voids , 1997 .

[40]  G. Levita,et al.  Essential work of fracture in polymer films , 1996, Journal of Materials Science.

[41]  W. Brocks,et al.  The second parameter in J-R curves: Constraint or triaxiality ? , 1995 .

[42]  A. Kobayashi,et al.  Two-Parameter Crack-Tip Field Associated with Stable Crack Growth in a Thin Plate: An Experimental Study , 1994 .

[43]  A. Needleman.  An analysis of tensile decohesion along an interface , 1990 .

[44]  D. Parks,et al.  Three-dimensional crack front fields in a thin ductile plate , 1990 .

[45]  R. McMeeking,et al.  Three-dimensional void growth before a blunting crack tip , 1989 .

[46]  V. Tvergaard.  Material Failure by Void Growth to Coalescence , 1989 .

[47]  Robert O. Ritchie,et al.  On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloys , 1985 .

[48]  A. Bakker.  On the Numerical Evaluation of J in Three Dimensions , 1984 .

[49]  W. Heinrich.  Broek, D., Elementary Engineering Fracture Mechanics. Alphen aan den Rijn, Sijthoff & Noordhoff 1978. XIII, 437 S., Dfl 120.00, $ 60.00 (cloth), Dfl 40.00, $ 20.00 (paper) , 1980 .

[50]  J. Devaux,et al.  Numerical study of initiation, stable crack growth, and maximum load, with a ductile fracture criterion based on the growth of holes , 1979 .

[51]  Albert S. Kobayashi,et al.  Elastic-Plastic Fracture , 1979 .

[52]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[53]  J. Rice,et al.  Elementary engineering fracture mechanics , 1974 .

[54]  J. Rice,et al.  Limitations to the small scale yielding approximation for crack tip plasticity , 1974 .

[55]  J. G. Kaufman,et al.  Progress in flaw growth and fracture toughness testing : proceedings of the 1972 National Symposium on Fracture Mechanics , 1973 .

[56]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[57]  Percy Williams Bridgman,et al.  Studies in large plastic flow and fracture , 1964 .