Optimization of Plasma Arc Welding Parameters by Using the Taguchi Method with the Grey Relational Analysis

The optimal parameters process of plasma arc welding (PAW) by the Taguchi method with Grey relational analysis is studied. The Grey relational grade is used to find optimal PAW parameters with multiple response performance characteristics. The welding parameters (welding current, welding speed, plasma gas flow rate, and torch stand-off) are optimized with consideration of the multiple response performance characteristics (the penetration of root, the weld groove width, and the weld pool undercut). As a result, the improvement percentage of the Grey relational grade with the multiple performance characteristics is 31.8%. It is shown that the multiple response performance characteristics are greatly improved through this study.

[1]  M. Kendall.  Statistical Methods for Research Workers , 1937, Nature.

[2]  E. Rödel,et al.  Fisher, R. A.: Statistical Methods for Research Workers, 14. Aufl., Oliver & Boyd, Edinburgh, London 1970. XIII, 362 S., 12 Abb., 74 Tab., 40 s , 1971 .

[3]  H. B. Cary,et al.  Modern Welding Technology , 1979 .

[4]  J. Deng,et al.  Introduction to Grey system theory , 1989 .

[5]  Y. S Tarng,et al.  Modeling, optimization and classification of weld quality in tungsten inert gas welding , 1999 .

[6]  Chia-Ming Chang,et al.  The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing , 2002 .

[7]  Y. S. Tarng,et al.  Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel , 2002 .

[8]  Yunn-Shiuan Liao,et al.  Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses , 2003 .

[9]  C. Fung.  Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis , 2003 .

[10]  Zone-Ching Lin,et al.  Analysis and Application of Grey Relation and ANOVA in Chemical–Mechanical Polishing Process Parameters , 2003 .

[11]  T.-R. Lin,et al.  Optimising removal rate and reliability of polishing of ceramic blocks using a combination of Taguchi and grey methods , 2004 .

[12]  C. L. Lin,et al.  Use of the Taguchi Method and Grey Relational Analysis to Optimize Turning Operations with Multiple Performance Characteristics , 2004 .

[13]  Der Ho Wu,et al.  Use of Taguchi method to develop a robust design for the magnesium alloy die casting process , 2004 .