Off-design performance prediction of radial turbines operating with ideal and real working fluids

[1]  Apostolos Pesyridis,et al.  Experimental Study of a Small Scale Organic Rankine Cycle Waste Heat Recovery System for a Heavy Duty Diesel Engine with Focus on the Radial Inflow Turbine Expander Performance , 2018 .

[2]  Apostolos Pesyridis,et al.  Effect of radial turbo-expander design on off-highway vehicle organic Rankine cycle system efficiency , 2018 .

[3]  Long Shao,et al.  Experimental study of an organic Rankine cycle system with radial inflow turbine and R123 , 2017 .

[4]  Fuhaid Alshammari,et al.  Radial Expander Design for an Engine Organic Rankine Cycle Waste Heat Recovery System , 2017 .

[5]  Ayad Al Jubori,et al.  An innovative small-scale two-stage axial turbine for low-temperature organic Rankine cycle , 2017 .

[6]  Asif Afzal,et al.  Computational Fluid Dynamics in Turbomachinery: A Review of State of the Art , 2017 .

[7]  Amin Mahmoudzadeh Andwari,et al.  Variable Geometry Turbocharger Technologies for Exhaust Energy Recovery and Boosting‐A Review , 2017 .

[8]  Lorenzo Tocci,et al.  Effect of an ORC Waste Heat Recovery System on Diesel Engine Fuel Economy for Off-Highway Vehicles , 2017 .

[9]  Ayad Al Jubori,et al.  Three dimensional optimization of small-scale axial turbine for low temperature heat source driven organic Rankine cycle , 2017 .

[10]  Lijun Wu,et al.  Comparative study of waste heat steam SRC, ORC and S-ORC power generation systems in medium-low temperature , 2016 .

[11]  Abdulnaser I. Sayma,et al.  The Application of Similitude Theory for the Performance Prediction of Radial Turbines Within Small-Scale Low-Temperature Organic Rankine Cycles , 2015 .

[12]  T. Johnson.  Review of Vehicular Emissions Trends , 2015 .

[13]  Li Zhao,et al.  A review of working fluid and expander selections for organic Rankine cycle , 2013 .

[14]  Vincent Lemort,et al.  Techno-economic survey of Organic Rankine Cycle (ORC) systems , 2013 .

[15]  Dimitrios T. Hountalas,et al.  Meanline Modeling of Radial Turbine Performance for Turbocharger Simulation and Diagnostic Applications , 2013 .

[16]  Sven B Andersson,et al.  Selecting an Expansion Machine for Vehicle Waste-Heat Recovery Systems Based on the Rankine Cycle , 2013 .

[17]  Chunqing Tan,et al.  Aerothermal Investigation of Backface Clearance Flow in Deeply Scalloped Radial Turbines , 2013 .

[18]  Christopher Depcik,et al.  Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery , 2013 .

[19]  Daniele Fiaschi,et al.  Thermo-fluid dynamics preliminary design of turbo-expanders for ORC cycles , 2012 .

[20]  Srithar Rajoo,et al.  Engine turbocharger performance prediction: One-dimensional modeling of a twin entry turbine , 2012 .

[21]  Saffa Riffat,et al.  Expanders for micro-CHP systems with organic Rankine cycle , 2011 .

[22]  George Papadakis,et al.  Low­grade heat conversion into power using organic Rankine cycles - A review of various applications , 2011 .

[23]  Gequn Shu,et al.  A review of researches on thermal exhaust heat recovery with Rankine cycle , 2011 .

[24]  Emilie Sauret,et al.  Candidate radial-inflow turbines and high-density working fluids for geothermal power systems , 2011 .

[25]  Minggao Ouyang,et al.  Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery , 2011 .

[26]  K. Srinivasan,et al.  Analysis of exhaust waste heat recovery from a dual fuel low temperature combustion engine using an Organic Rankine Cycle , 2010 .

[27]  N. Baines.  Axial and Radial Turbines , 2003 .

[28]  Philippe Dupont,et al.  CFD calculation of a mixed flow pump characteristic from shutoff to maximum flow , 2002 .

[29]  Stephen Spence,et al.  Experimental performance evaluation of a 99.0 mm radial inflow nozzled turbine at larger stator-rotor throat area ratios , 1999 .

[30]  Peter L Meitner,et al.  Off-Design Performance Loss Model for Radial Turbines with Pivoting, Variable-Area Stators. , 1980 .

[31]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[32]  A. J. Glassman,et al.  FORTRAN program for predicting off-design performance of radial-inflow turbines , 1975 .

[33]  Stuart W. Churchill,et al.  Empirical expressions for the shear stress in turbulent flow in commercial pipe , 1973 .

[34]  G. Soave.  Equilibrium constants from a modified Redlich-Kwong equation of state , 1972 .

[35]  Maurizio Pandolfi,et al.  A method for evaluating the off-design performance of a radial inflow turbine and comparison with experiments☆ , 1969 .

[36]  R. S. Benson.  Paper 16: An Analysis of the Losses in a Radial Gas Turbine: , 1965 .

[37]  R. E. Nece,et al.  Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks , 1960 .

[38]  J. D. Stanitz.  Some Theoretical Aerodynamic Investigations of Impellers in Radial- and Mixed-Flow Centrifugal Compressors , 1952, Journal of Fluids Engineering.

[39]  O. E. Baljé.  A Contribution to the Problem of Designing Radial Turbomachines , 1952, Journal of Fluids Engineering.

[40]  O. Redlich,et al.  On the thermodynamics of solutions; an equation of state; fugacities of gaseous solutions. , 1949, Chemical reviews.

[41]  M. White,et al.  The design and analysis of radial inflow turbines implemented within low temperature organic Rankine cycles , 2015 .

[42]  R. Aungier.  Detailed Aerodynamic Design of Radial-Inflow Turbine Components , 2006 .

[43]  A. Whitfield,et al.  Design of radial turbomachines , 1990 .

[44]  Henry Cohen,et al.  Gas turbine theory , 1973 .