EXPERIMENTS IN STRATIFIED COMBUSTION WITH A RAPID COMPRESSION MACHINE

High-speed movies and analysis of rapid compression machine experiments were used to study mechanisms that control combustion rates in the Texaco Controlled Combustion System. The Texaco system is a spark-ignited, direct injection, stratified charge engine with a deep cup in the piston, relatively high swirl in the combustion chamber, and injection-controlled timing. The fuel injection nozzle is directed at spark plug electrodes. Air swirl is oriented to carry fuel from the injector to the spark plug. The Texaco stratified charge engine has demonstrated good fuel economy, relatively low emissions, and a wide fuel tolerance. A rapid compression machine was employed to obtain performance data and high-speed combustion photographs with the Texaco geometry. Experimental results were analyzed to describe the combustion process, particularly physical mechanisms that control mixing and combustion rates. Air motion in the combustion chamber appeared to be dominated by air swirl, and simple mass and momentum arguments could be used to calculate air swirl at top dead center. Fuel jet motion for the injector to the spark plug could be computed with a single jet mixing model. A similar model also appeared to be appropriate for calculating the motion of unburned fuel-air mixture in the wake of spark plug electrodes.

[1]  F. P. Ricou,et al.  Measurements of entrainment by axisymmetrical turbulent jets , 1961, Journal of Fluid Mechanics.

[2]  M. Alperstein,et al.  Texaco's Stratified Charge Engine - Multifuel Efficient, Clean, and Practical , 1974 .

[3]  R. E. Canup.  THE TEXACO IGNITION SYSTEM--A NEW CONCEPT FOR AUTOMOTIVE ENGINES , 1975 .

[4]  John H. Johnson,et al.  Unsteady Vaporization Histories and Trajectories of Fuel Drops Injected into Swirling Air , 1962 .

[5]  Gordon Dean Marsh.  A detailed performance comparison of distillate fuels in the Texaco stratified charge engine. , 1976 .

[6]  B. C. Jain,et al.  Performance model for the Texaco controlled combustion, stratified charge engine. SAE Paper 760116 , 1976 .

[7]  The steady evaporation and mixing of a spray in a gaseous swirl , 1971 .

[8]  K. A. Troth,et al.  Penetration and Vaporization of Diesel Fuel Sprays , 1969 .

[9]  J. Fay,et al.  A Theory of Plume Rise Compared with Field Observations , 1969 .

[10]  G. Woschni.  A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[11]  James C. Keck,et al.  EXPERIMENTAL AND THEORETICAL INVESTIGATION OF TURBULENT BURNING MODEL FOR INTERNAL COMBUSTION ENGINES , 1974 .

[12]  S. Kotake,et al.  Evaporation and combustion of a fuel droplet , 1969 .

[13]  John B. Heywood,et al.  Photographic and Performance Studies of Diesel Combustion With a Rapid Compression Machine , 1974 .

[14]  David P. Hoult,et al.  Turbulent plume in a laminar cross flow , 1972 .

[15]  M. P. Escudier,et al.  Aerodynamics of a Burning Turbulent Gas Jet in a Crossflow , 1971 .

[16]  A. R. Rogowski.  A New Machine for Studying Combustion of Fuel Sprays with Controlled Air Motion , 1961 .